常用按钮

Help

Click the Help button to open the help page associated with the currently open dialog.

取消

点击「取消」关闭对话框,不保存所做的任何修改。

完成

应用所有更改并关闭向导。

工具栏

点击某些图标旁边的箭头可以打开工具栏。要移动工具栏,请拖动标题栏。释放鼠标按钮后,工具栏将停留在新位置。将标题栏拖到另一个位置,或拖到窗口的边缘,即工具栏将要停靠的位置。点击「关闭窗口」图标关闭工具栏。通过选择「视图 - 工具栏 - (工具栏名称) 」再次显示工具栏。

微调按钮

  1. 在表单控件内, 微调按钮是一个数字字段、货币字段、日期字段、或时间字段的属性。如果「微调按钮」属性是激活状态,此字段会显示一对带箭头的符号。这些箭头指向相反的方向,或垂直或水平。

  2. 在「Basic IDE」中,微调按钮是数字字段与两个箭头符号的总称。

您可以在微调按钮字段中输入数字值,或点击微调按钮中的「向上箭头」或「向下箭头」符号选择数值。也可以使用键盘上的「向上箭头」或「向下箭头」键来增减数值。按「向上翻页」与「向下翻页」键可直接设置最大值与最小值。

If the field next to the spin button defines numerical values, you can also define a measurement unit, for example, 1 cm or 5 mm, 12 pt or 2".

转换

如果要继续,请点击对话框中的「下一步」按钮。在对话框的最后一个页面上,对应位置的按钮的名称为「转换」。点击此按钮即可执行转换。

右键菜单

要激活对象的右键菜单,首先用鼠标点击该对象选中它,然后。即使没有选中对象,也可以调用某些右键菜单。在 LibreOffice 中,几乎到处都有右键菜单。

删除

确认后删除选中元素。

删除

不经确认即删除选中元素。

公制

You can enter values in the input fields in different units of measurement. The default unit is inches. However, if you want a space of exactly 1 cm, then type "1cm". Additional units are available according to the context, for example, 12 pt for a 12 point spacing. If the value of the new unit is unrealistic, the program uses a predefined maximum or minimum value.

关闭

关闭对话框并保存所有修改。

关闭

关闭该对话框。

应用

应用修改或选中的值,但不关闭对话框。

This option appears only for Paragraph Style, Frame Style, and Page Style.

This option appears only for Paragraph Style and Character Style.

Shrink / Expand

Click the Shrink icon to reduce the dialog to the size of the input field. It is then easier to mark the required reference in the sheet. The icons then automatically convert to the Expand icon. Click it to restore the dialog to its original size.

当您在工作表中点击鼠标按钮并拖动一个区域时,对话框自动缩小。一旦您放开鼠标按钮,对话框便重新用完整大小显示,而用鼠标定义的区域引用在文档中用一个蓝色的边框被突出强调出来。

Icon shrink

缩小

Icon Expand

Expand

预览字段

Displays a preview of the current selection.

Preview

Displays a preview of the current selection.

继续

点击「下一步」按钮,「向导」将采用当前对话框的设置并转到下一步。如果到达了最后一步,对应位置的按钮变为「创建」。

对话框按钮

重置

将当前选项卡中一修改的内容重置到修改前的状态。

取消

关闭窗口并放弃更改。

确定

保存所有设置并关闭窗口。

重置

重置此对话框打开时对当前选项卡所作的可应用的变更。

重置

将当前选项卡中所做的修改重置为打开对话框时具有的设置值。在关闭对话框时不显示确认询问。

标准

将对话框中可见的值重置为默认安装值。

warning

在重新装入默认值之前不显示确认询问。


Cancel

Closes dialog and discards changes on all tabs. If Apply was used, then changes after the last use of Apply are discarded.

Reset

Resets modified values on the current tab back to the values when the dialog was opened. If Apply is used before closing the dialog, then values are reset to those after the last use of Apply.

Apply

Applies modifications on all tabs without closing dialog. Cannot be reverted with Reset.

Reset to Parent

Values for the current tab are set to those found in the corresponding tab of the style specified in “Inherit from” in the General tab. In all cases, also when “Inherit from” is “- None -”, current tab values specified in “Contains” are removed.

This option appears only for Paragraph Style, Character Style, and Frame Style.

上一步

查看上一步对话框中所做的选择。当前设置保持不变。从第二个页面开始才可以激活此按钮。

选项

点击「选项」标签可展开对话框以显示更多的选项。再次点击可恢复对话框。

另请参考以下函数:

The search supports wildcards or regular expressions. With regular expressions enabled, you can enter "all.*", for example to find the first location of "all" followed by any characters. If you want to search for a text that is also a regular expression, you must either precede every regular expression metacharacter or operator with a "\" character, or enclose the text into \Q...\E. You can switch the automatic evaluation of wildcards or regular expression on and off in - LibreOffice Calc - Calculate.

warning

When using functions where one or more arguments are search criteria strings that represents a regular expression, the first attempt is to convert the string criteria to numbers. For example, ".0" will convert to 0.0 and so on. If successful, the match will not be a regular expression match but a numeric match. However, when switching to a locale where the decimal separator is not the dot makes the regular expression conversion work. To force the evaluation of the regular expression instead of a numeric expression, use some expression that can not be misread as numeric, such as ".[0]" or ".\0" or "(?i).0".


如果发生错误,此函数将返回一个逻辑值或数字值。

(This command is only accessible through the context menu).

双击一个工具,可以应用于多项任务。若只是点击,则完成该任务时会返回到上次的选择。

按「Shift+F1」键并指向一个控件去了解更多关于该控件的信息。

「选项」对话框按钮

确定

保存页面中的变更并关闭「选项」对话框。

取消

关闭「选项」对话框并放弃作出的所有变更。

应用

应用修改或选中的值,但不关闭「选项」对话框。

重置

重置此对话框打开时对当前选项卡所作的可应用的变更。

warning

一些选项一旦编辑即无法重置。请手动编辑回原状或点击「取消」然后重新打开「选项」对话框。


请支持我们!