SFDocuments.Calc service

The SFDocuments shared library provides a number of methods and properties to facilitate the management and handling of LibreOffice documents.

The SFDocuments.Calc service is a subclass of the SFDocuments.Document service. All methods and properties defined for the Document service can also be accessed using a Calc service instance.

The Calc service is focused on:

note

This help page describes methods and properties that are applicable only to Calc documents.


Service invocation

Before using the Calc service the ScriptForge library needs to be loaded or imported:

note

• Basic macros require to load ScriptForge library using the following statement:
GlobalScope.BasicLibraries.loadLibrary("ScriptForge")

• Python scripts require an import from scriptforge module:
from scriptforge import CreateScriptService


The Calc service is closely related to the UI service of the ScriptForge library. Below are a few examples of how the Calc service can be invoked.

在BASIC中

The code snippet below creates a Calc service instance that corresponds to the currently active Calc document.


    Set oDoc = CreateScriptService("Calc")
  

Another way to create an instance of the Calc service is using the UI service. In the following example, a new Calc document is created and oDoc is a Calc service instance:


    Dim ui As Object, oDoc As Object
    Set ui = CreateScriptService("UI")
    Set oDoc = ui.CreateDocument("Calc")
  

Or using the OpenDocument method from the UI service:


    Set oDoc = ui.OpenDocument("C:\Documents\MyFile.ods")
  

It is also possible to instantiate the Calc service specifying a window name for the CreateScriptService method:


    Dim oDoc As Object
    Set oDoc = CreateScriptService("SFDocuments.Calc", "MyFile.ods")
  

In the example above, "MyFile.ods" is the name of an open document window. If this argument is not provided, the active window is considered.

It is also possible to invoke the Calc service using the document referenced by ThisComponent. This is specially useful when running a macro from within the Basic IDE.


    Dim oDoc As Object
    Set oDoc = CreateScriptService("Calc", ThisComponent)
  

It is recommended to free resources after use:


    Set oDoc = oDoc.Dispose()
  

However, if the document was closed using the CloseDocument method, it becomes unnecessary to free resources using the command described above.

在Python中

    myDoc = CreateScriptService("Calc")
  

    ui = CreateScriptService("UI")
    myDoc = ui.CreateDocument("Calc")
  

    myDoc = ui.OpenDocument(r"C:\Documents\MyFile.ods")
  

    myDoc = CreateScriptService("SFDocuments.Calc", "MyFile.ods")
    myDoc.Dispose()
  

    bas = CreateScriptService("Basic")
    myDoc = CreateScriptService("Calc", bas.ThisComponent)
  
tip

The use of the prefix "SFDocuments." while calling the service is optional.


Definitions

Many methods require a "Sheet" or a "Range" as argument. Single cells are considered a special case of a Range.

Both may be expressed either as a string or as a reference (= object) depending on the situation:

示例:

The example below copies data from document A (opened as read-only and hidden) to document B.

在BASIC中

    Dim oDocA As Object, oDocB As Object
    Set oDocA = ui.OpenDocument("C:\Documents\FileA.ods", Hidden := True, ReadOnly := True)
    Set oDocB = ui.OpenDocument("C:\Documents\FileB.ods")
    oDocB.CopyToRange(oDocA.Range("SheetX.D4:F8"), "D2:F6") 'CopyToRange(source, target)
  
在Python中

    docA = ui.OpenDocument(r"C:\Documents\FileA.ods", hidden = True, readonly = True)
    docB = ui.OpenDocument(r"C:\Documents\FileB.ods")
    docB.CopyToRange(docA.Range("SheetX.D4:F8"), "D2:F6")
  

SheetName

Either the sheet name as a string or an object produced by the .Sheet property.

The shortcut "~" (tilde) represents the current sheet.

RangeName

Either a string designating a set of contiguous cells located in a sheet of the current instance or an object produced by the .Range property.

The shortcut "~" (tilde) represents the current selection or the first selected range if multiple ranges are selected.

The shortcut "*" represents all used cells.

The sheet name is optional when defining a range. If no sheet name is provided, then the active sheet is used. Surrounding single quotes and $ signs are allowed but ignored.

When specifying a SheetName as a string, the use of single quotes to enclose the sheet name are required if the name contains blank spaces " " or periods ".".

The examples below illustrate in which cases the use of single quotes is mandatory:


      ' The use of single quotes is optional
      oDoc.clearAll("SheetA.A1:B10")
      oDoc.clearAll("'SheetA'.A1:B10")
      ' The use of single quotes is required
      oDoc.clearAll("'Sheet.A'.A1:B10")
    
tip

Except for the CurrentSelection property, the Calc service considers only single ranges of cells.


Examples of valid ranges

1) $'SheetX'.D2
2) $D$2

A single cell

1) $'SheetX'.D2:F6
2) D2:D10

Single range with multiple cells

$'SheetX'.*

All used cells in the given sheet

1) $'SheetX'.A:A (column A)
2) 3:5 (rows 3 to 5)

All cells in contiguous columns or rows up to the last used cell

myRange

A range named "myRange" at spreadsheet level

1) ~.someRange
2) SheetX.someRange

A range name at sheet level

myDoc.Range("SheetX.D2:F6")

A range within the sheet SheetX in file associated with the myDoc Calc instance

~.~ or ~

The current selection in the active sheet


Properties

All the properties generic to any document are implicitly applicable also to Calc documents. For more information, read the Document service Help page.

The properties specifically available for Calc documents are:

Name

Readonly

Argument

Return type

Description

CurrentSelection

No

None

String or array of strings

The single selected range as a string or the list of selected ranges as an array.

FirstCell

Yes

SheetName or RangeName as String

String

Returns the first used cell in a given range or sheet.

FirstColumn

Yes

SheetName or RangeName as String

Long

Returns the leftmost column number in a given range or sheet.

FirstRow

Yes

SheetName or RangeName as String

Long

Returns the topmost row number in a given range or sheet.

Height

Yes

RangeName As String

Long

The number of rows (>= 1) in the given range.

LastCell

Yes

SheetName or RangeName as String

String

Returns the last used cell in a given range or sheet.

LastColumn

Yes

SheetName or RangeName as String

Long

The last used column in a given range or sheet.

LastRow

Yes

SheetName or RangeName as String

Long

The last used row in a given range or sheet.

Range

Yes

RangeName As String

Object

A range reference that can be used as argument of methods like CopyToRange.

Region

Yes

RangeName As String

String

Returns the address of the smallest area that contains the specified range so that the area is surrounded by empty cells or sheet edges. This is equivalent to applying the shortcut to the given range.

Sheet

Yes

SheetName As String

Object

A sheet reference that can be used as argument of methods like CopySheet.

SheetName

Yes

RangeName As String

String

Returns the sheet name of a given range address.

Sheets

Yes

None

Array of strings

The list with the names of all existing sheets.

Width

Yes

RangeName As String

Long

The number of columns (>= 1) in the given range.

XCellRange

Yes

RangeName As String

Object

A com.sun.star.Table.XCellRange UNO object.

XSheetCellCursor

Yes

RangeName As String

Object

A com.sun.star.sheet.XSheetCellCursor UNO object. After moving the cursor, the resulting range address can be accessed through the AbsoluteName UNO property of the cursor object, which returns a string value that can be used as argument for properties and methods of the Calc service.

XSpreadsheet

Yes

SheetName As String

Object

A com.sun.star.sheet.XSpreadsheet UNO object.


tip

Visit LibreOffice API Documentation's website to learn more about XCellRange, XSheetCellCursor and XSpreadsheet UNO objects.


Methods

List of Methods in the Calc Service

A1Style
Activate
Charts
ClearAll
ClearFormats
ClearValues
CompactLeft
CompactUp
CopySheet
CopySheetFromFile
CopyToCell
CopyToRange
CreateChart
CreatePivotTable
DAvg
DCount

DMax
DMin
DSum
ExportRangeToFile
Forms
GetColumnName
GetFormula
GetValue
ImportFromCSVFile
ImportFromDatabase
ImportStylesFromFile
InsertSheet
MoveRange
MoveSheet
Offset
OpenRangeSelector

PrintOut
Printf
RemoveDuplicates
RemoveSheet
RenameSheet
SetArray
SetCellStyle
SetFormula
SetValue
ShiftDown
ShiftLeft
ShiftRight
ShiftUp
SortRange



A1Style

Returns a range address as a string based on sheet coordinates, i.e. row and column numbers.

If only a pair of coordinates is given, then an address to a single cell is returned. Additional arguments can specify the bottom-right cell of a rectangular range.

语法:

svc.A1Style(row1: int, column1: int, row2: int = 0; column2: int = 0; sheetname: str = "~"): str

参数:

row1, column1: Specify the row and column numbers of the top-left cell in the range to be considered. Row and column numbers start at 1.

row2, column2: Specify the row and column numbers of the bottom-right cell in the range to be considered. If these arguments are not provided, or if values smaller than row1 and column1 are given, then the address of the single cell range represented by row1 and column1 is returned.

sheetname: The name of the sheet to be appended to the returned range address. The sheet must exist. The default value is "~" corresponding to the currently active sheet.

示例:

The examples below in Basic and Python consider that "Sheet1" is the currently active sheet.

在BASIC中

    Set oDoc = CreateScriptService("Calc")
    addr1 = oDoc.A1Style(1, 1) ' '$Sheet1'.$A$1
    addr2 = oDoc.A1Style(2, 2, 3, 6) ' '$Sheet1'.$B$2:$F$3
    addr3 = oDoc.A1Style(2, 2, 0, 6) ' '$Sheet1'.$B$2
    addr4 = oDoc.A1Style(3, 4, 3, 8, "Sheet2") ' '$Sheet2'.$D$3:$H$3
    addr5 = oDoc.A1Style(5, 1, SheetName := "Sheet3") ' '$Sheet3'.$A$5
  
在Python中

    doc = CreateScriptService("Calc")
    addr1 = doc.A1Style(1, 1) # '$Sheet1'.$A$1
    addr2 = doc.A1Style(2, 2, 3, 6) # '$Sheet1'.$B$2:$F$3
    addr3 = doc.A1Style(2, 2, 0, 6) # '$Sheet1'.$B$2
    addr4 = doc.A1Style(3, 4, 3, 8, "Sheet2") # '$Sheet2'.$D$3:$H$3
    addr5 = doc.A1Style(5, 1, sheetname="Sheet3") # '$Sheet3'.$A$5
  
tip

The method A1Style can be combined with any of the many properties and methods of the Calc service that require a range as argument, such as GetValue, GetFormula, ClearAll, etc.


Activate

If the argument sheetname is provided, the given sheet is activated and it becomes the currently selected sheet. If the argument is absent, then the document window is activated.

语法:

svc.Activate(sheetname: str = ""): bool

参数:

sheetname: The name of the sheet to be activated in the document. The default value is an empty string, meaning that the document window will be activated without changing the active sheet.

示例:

The example below activates the sheet named "Sheet4" in the currently active document.

在BASIC中

    Dim ui as Variant, oDoc as Object
    Set ui = CreateScriptService("UI")
    Set oDoc = ui.GetDocument(ui.ActiveWindow)
    oDoc.Activate("Sheet4")
  
在Python中

    ui = CreateScriptService("UI")
    myDoc = ui.GetDocument(ui.ActiveWindow)
    myDoc.Activate("Sheet4")
  
tip

Activating a sheet makes sense only if it is performed on a Calc document. To make sure you have a Calc document at hand you can use the isCalc property of the document object, which returns True if it is a Calc document and False otherwise.


Charts

Returns either the list with the names of all chart objects in a given sheet or a single Chart service instance.

语法:

svc.Charts(sheetname: str, chartname: str = ""): obj

参数:

sheetname: The name of the sheet from which the list of charts is to be retrieved or where the specified chart is located.

chartname: The user-defined name of the chart object to be returned. If the chart does not have a user-defined name, then the internal object name can be used. If this argument is absent, then the list of chart names in the specified sheet is returned.

tip

Use the Navigator sidebar to check the names assigned to charts under the OLE objects category.


示例:

在BASIC中

The example below shows the number of chart objects in "Sheet1".


    Dim arrNames as Object
    arrNames = oDoc.Charts("Sheet1")
    MsgBox "There are " & UBound(arrNames) + 1 & " charts in Sheet1"
  

The following example accesses the chart named "MyChart" in "Sheet1" and prints its type.


    Dim oChart as Object
    oChart = oDoc.Charts("Sheet1", "MyChart")
    MsgBox oChart.ChartType
  
在Python中

    bas = CreateScriptService("Basic")
    chart_names = doc.Charts("Sheet1")
    bas.MsgBox(f"There are {len(chart_names)} charts in Sheet1")
  

    chart = doc.Charts("Sheet1", "MyChart")
    bas.MsgBox(chart.ChartType)
  

ClearAll

Clears all the contents and formats of the given range.

A filter formula can be specified to determine which cells shall be affected.

语法:

svc.ClearAll(range: str, opt filterformula: str, opt filterscope: str)

参数:

range: The range to be cleared, as a string.

filterformula: A Calc formula that shall be applied to the given range to determine which cells will be affected. The specified formula must return True or False. If this argument is not specified, then all cells in the range are affected.

filterscope: Determines how filterformula is expanded to the given range. This argument is mandatory if a filterformula is specified. The following values are accepted:

示例:

在BASIC中

    ' Clears all cells in the range SheetX.A1:J10
    oDoc.ClearAll("SheetX.A1:J10")
    ' Clears all cells in the range SheetX.A1:J10 that have a value greater than 100
    oDoc.ClearAll("SheetX.A1:J10", "=SheetX.A1>100", "CELL")
    ' Clears all rows in the range SheetX.A1:J10 whose sum is greater than 500
    oDoc.ClearAll("SheetX.A1:J10", "=SUM(SheetX.A1:J1)>100", "ROW")
    ' Clears all columns in the range SheetX.A1:J10 whose sum is greater than 500
    oDoc.ClearAll("SheetX.A1:J10", "=SUM(SheetX.A1:A10)>100", "COLUMN")
  
在Python中

    myDoc.ClearAll("SheetX.A1:F10")
    myDoc.ClearAll("SheetX.A1:J10", "=SheetX.A1>100", "CELL")
    myDoc.ClearAll("SheetX.A1:J10", "=SUM(SheetX.A1:J1)>100", "ROW")
    myDoc.ClearAll("SheetX.A1:J10", "=SUM(SheetX.A1:A10)>100", "COLUMN")
  

ClearFormats

Clears the formats and styles in the given range.

A filter formula can be specified to determine which cells shall be affected.

语法:

svc.ClearFormats(range: str, opt filterformula: str, opt filterscope: str)

参数:

range: The range whose formats and styles are to be cleared, as a string.

filterformula: A Calc formula that shall be applied to the given range to determine which cells will be affected. The specified formula must return True or False. If this argument is not specified, then all cells in the range are affected.

filterscope: Determines how filterformula is expanded to the given range. This argument is mandatory if a filterformula is specified. The following values are accepted:

示例:

在BASIC中

      oDoc.ClearFormats("SheetX.*")
  
在Python中

    myDoc.ClearFormats("SheetX.*")
  
tip

Refer to the ClearAll method documentation for examples on how to use the arguments filterformula and filterscope.


ClearValues

Clears the values and formulas in the given range.

A filter formula can be specified to determine which cells shall be affected.

语法:

svc.ClearValues(range: str, opt filterformula: str, opt filterscope: str)

参数:

range: The range whose values and formulas are to be cleared, as a string.

filterformula: A Calc formula that shall be applied to the given range to determine which cells will be affected. The specified formula must return True or False. If this argument is not specified, then all cells in the range are affected.

filterscope: Determines how filterformula is expanded to the given range. This argument is mandatory if a filterformula is specified. The following values are accepted:

示例:

在BASIC中

      oDoc.ClearValues("SheetX.A1:F10")
  
在Python中

    myDoc.ClearValues("SheetX.A1:F10")
  
tip

Refer to the ClearAll method documentation for examples on how to use the arguments filterformula and filterscope.


CompactLeft

Deletes the columns of a specified range that match a filter expressed as a Calc formula. The filter is applied to each column to decide whether it will be deleted or not.

The deleted column can be limited to the height of the specified range or span to the height of the entire sheet, thus deleting whole columns.

This method returns a string with the range address of the compacted range. If all columns are deleted, then an empty string is returned.

note

If a range of cells is selected, calling this method will not impact the selection.


语法:

svc.CompactLeft(range: str, wholecolumn: bool = False, opt filterformula: str): str

参数:

range: The range from which columns will be deleted, as a string.

wholecolumn: If this option is set to True the entire column will be deleted from the sheet. The default value is False, which means that the deleted column will be limited to the height of the specified range.

filterformula: The filter to be applied to each column to determine whether or not it will be deleted. The filter is expressed as a Calc formula that should be applied to the first column. When the formula returns True for a column, that column will be deleted. The default filter deletes all empty columns.

For example, suppose range A1:J200 is selected (height = 200), so the default formula is =(COUNTBLANK(A1:A200)=200). This means that if all 200 cells are empty in the first column (Column A), then the column is deleted. Note that the formula is expressed with respect to the first column only. Internally the CompactLeft method will generalize this formula for all the remaining columns.

note

Calc functions used in the filterformula argument must be expressed using their English names. Visit the Wiki page List of Calc Functions for a complete list of Calc functions in English.


示例:

在BASIC中

    ' Delete all empty columns in the range G1:L10 from Sheet1
    newrange = oDoc.CompactLeft("Sheet1.G1:L10")
    ' The example below is similar, but the entire column is deleted from the sheet
    newrange = oDoc.CompactLeft("Sheet1.G1:L10", WholeColumn := True)
    ' Deletes all columns where the first row is marked with an "X"
    newrange = oDoc.CompactLeft("Sheet1.G1:L10", FilterFormula := "=(G1=""X"")")
    ' Deletes all columns where the sum of values in the column is odd
    newrange = oDoc.CompactLeft("Sheet1.G1:L10", FilterFormula := "=(MOD(SUM(G1:G10);2)=1)")
  
在Python中

    newrange = myDoc.CompactLeft("Sheet1.G1:L10")
    newrange = myDoc.CompactLeft("Sheet1.G1:L10", wholecolumn = True)
    newrange = myDoc.CompactLeft("Sheet1.G1:L10", filterformula = '=(G1="X")')
    newrange = myDoc.CompactLeft("Sheet1.G1:L10", filterformula = '=(MOD(SUM(G1:G10);2)=1)')
  

CompactUp

Deletes the rows of a specified range that match a filter expressed as a Calc formula. The filter is applied to each row to decide whether it will be deleted or not.

The deleted rows can be limited to the width of the specified range or span to the width of the entire sheet, thus deleting whole rows.

This method returns a string with the range address of the compacted range. If all rows are deleted, then an empty string is returned.

note

If a range of cells is selected, calling this method will not impact the selection.


语法:

svc.CompactUp(range: str, wholerow: bool = False, opt filterformula: str): str

参数:

range: The range from which rows will be deleted, as a string.

wholerow: If this option is set to True the entire row will be deleted from the sheet. The default value is False, which means that the deleted row will be limited to the width of the specified range.

filterformula: The filter to be applied to each row to determine whether or not it will be deleted. The filter is expressed as a Calc formula that should be applied to the first row. When the formula returns True for a row, that row will be deleted. The default filter deletes all empty rows.

For example, suppose range A1:J200 is selected (width = 10), so the default formula is =(COUNTBLANK(A1:J1)=10). This means that if all 10 cells are empty in the first row (Row 1), then the row is deleted. Note that the formula is expressed with respect to the first row only. Internally the CompactUp method will generalize this formula for all the remaining rows.

note

The Calc functions used in the formula specified in the filterformula argument must be expressed using their English names. Visit the Wiki page List of Calc Functions for a complete list of Calc functions in English.


示例:

在BASIC中

    ' Delete all empty rows in the range G1:L10 from Sheet1
    newrange = oDoc.CompactUp("Sheet1.G1:L10")
    ' The example below is similar, but the entire row is deleted from the sheet
    newrange = oDoc.CompactUp("Sheet1.G1:L10", WholeRow := True)
    ' Deletes all rows where the first column is marked with an "X"
    newrange = oDoc.CompactUp("Sheet1.G1:L10", FilterFormula := "=(G1=""X"")")
    ' Deletes all rows where the sum of values in the row is odd
    newrange = oDoc.CompactUp("Sheet1.G1:L10", FilterFormula := "=(MOD(SUM(G1:L1);2)=1)")
  
在Python中

    newrange = myDoc.CompactUp("Sheet1.G1:L10")
    newrange = myDoc.CompactUp("Sheet1.G1:L10", wholerow = True)
    newrange = myDoc.CompactUp("Sheet1.G1:L10", filterformula = '=(G1="X")')
    newrange = myDoc.CompactUp("Sheet1.G1:L10", filterformula = '=(MOD(SUM(G1:L1);2)=1)')
  

CopySheet

Copies a specified sheet before an existing sheet or at the end of the list of sheets. The sheet to be copied may be contained inside any open Calc document. Returns True if successful.

语法:

svc.CopySheet(sheetname: any, newname: str, [beforesheet: any]): bool

参数:

sheetname: The name of the sheet to be copied as a string or its reference as an object.

newname: The name of the sheet to insert. The name must not be in use in the document.

beforesheet: The name (string) or index (numeric, starting from 1) of the sheet before which to insert the copied sheet. This argument is optional and the default behavior is to add the copied sheet at the last position.

示例:

在BASIC中

The following example makes a copy of the sheet "SheetX" and places it as the last sheet in the current document. The name of the copied sheet is "SheetY".


    Dim oDoc as Object
    'Gets the Document object of the active window
    Set oDoc = CreateScriptService("Calc")
    oDoc.CopySheet("SheetX", "SheetY")
  

The example below copies "SheetX" from "FileA.ods" and pastes it at the last position of "FileB.ods" with the name "SheetY":


      Dim oDocA As Object : Set oDocA = ui.OpenDocument("C:\Documents\FileA.ods", Hidden := True, ReadOnly := True)
      Dim oDocB As Object : Set oDocB = ui.OpenDocument("C:\Documents\FileB.ods")
      oDocB.CopySheet(oDocA.Sheet("SheetX"), "SheetY")
  
在Python中

    myDoc.CopySheet("SheetX", "SheetY")
  

    docA = ui.OpenDocument(r"C:\Documents\FileA.ods", hidden = True, readonly = True)
    docB = ui.OpenDocument(r"C:\Documents\FileB.ods")
    docB.CopySheet(docA.Sheet("SheetX"), "SheetY")
  
tip

To copy sheets between open documents, use CopySheet. To copy sheets from documents that are closed, use CopySheetFromFile.


CopySheetFromFile

Copies a specified sheet from a closed Calc document and pastes it before an existing sheet or at the end of the list of sheets of the file referred to by a Document object.

If the file does not exist, an error is raised. If the file is not a valid Calc file, a blank sheet is inserted. If the source sheet does not exist in the input file, an error message is inserted at the top of the newly pasted sheet.

语法:

svc.CopySheetFromFile(filename: str, sheetname: str, newname: str, [beforesheet: any]): bool

参数:

filename: Identifies the file to open. It must follow the SF_FileSystem.FileNaming notation. The file must not be protected with a password.

sheetname: The name of the sheet to be copied as a string.

newname: The name of the copied sheet to be inserted in the document. The name must not be in use in the document.

beforesheet: The name (string) or index (numeric, starting from 1) of the sheet before which to insert the copied sheet. This argument is optional and the default behavior is to add the copied sheet at the last position.

示例:

The following example copies "SheetX" from "myFile.ods" and pastes it into the document referred to by "oDoc" as "SheetY" at the first position.

在BASIC中

    oDoc.CopySheetFromFile("C:\Documents\myFile.ods", "SheetX", "SheetY", 1)
  
在Python中

    myDoc.CopySheetFromFile(r"C:\Documents\myFile.ods", "SheetX", "SheetY", 1)
  

CopyToCell

Copies a specified source range (values, formulas and formats) to a destination range or cell. The method reproduces the behaviour of a Copy/Paste operation from a range to a single cell.

It returns a string representing the modified range of cells. The size of the modified area is fully determined by the size of the source area.

The source range may belong to another open document.

语法:

svc.CopyToCell(sourcerange: any, destinationcell: str): str

参数:

sourcerange: The source range as a string when it belongs to the same document or as a reference when it belongs to another open Calc document.

destinationcell: The destination cell where the copied range of cells will be pasted, as a string. If a range is given, only its top-left cell is considered.

示例:

在BASIC中

Next is an example where the source and destination are in the same file:


      oDoc.CopyToCell("SheetX.A1:F10", "SheetY.C5")
  

The example below illustrates how to copy a range from another open Calc document:


    Dim ui as Variant : ui = CreateScriptService("UI")
    Dim oDocSource As Object, oDocDestination As Object
    'Open the source document in the background (hidden)
    Set oDocSource = ui.OpenDocument("C:\SourceFile.ods", Hidden := True, ReadOnly := True)
    Set oDocDestination = CreateScriptService("Calc")
    oDocDestination.CopyToCell(oDocSource.Range("Sheet1.C2:C4"), "SheetT.A5")
    'Do not forget to close the source document because it was opened as hidden
    oDocSource.CloseDocument()
  
在Python中

    docSource = ui.OpenDocument(r"C:\Documents\SourceFile.ods", hidden = True, readonly = True)
    docDestination = CreateScriptService("Calc")
    docDestination.CopyToCell(docSource.Range("Sheet1.C2:C4"), "SheetT.A5")
    docSource.CloseDocument()
  
tip

To simulate a Copy/Paste from a range to a single cell, use CopyToCell. To simulate a Copy/Paste from a range to a larger range (with the same cells being replicated several times), use CopyToRange.


CopyToRange

Copies downwards and/or rightwards a specified source range (values, formulas and formats) to a destination range. The method imitates the behaviour of a Copy/Paste operation from a source range to a larger destination range.

The method returns a string representing the modified range of cells.

The source range may belong to another open document.

语法:

svc.CopyToRange(sourcerange: any, destinationrange: str): str

参数:

sourcerange: The source range as a string when it belongs to the same document or as a reference when it belongs to another open Calc document.

destinationrange: The destination of the copied range of cells, as a string.

示例:

在BASIC中

Copy within the same document:


    oDoc.CopyToRange("SheetX.A1:F10", "SheetY.C5:J5")
    ' Returns a range string: "$SheetY.$C$5:$J$14"
  

Copy from one file to another:


    Dim oDocA As Object : Set oDocA = ui.OpenDocument("C:\Documents\FileA.ods", Hidden := True, ReadOnly := True)
    Dim oDocB As Object : Set oDocB = ui.OpenDocument("C:\Documents\FileB.ods")
    oDocB.CopyToRange(oDocA.Range("SheetX.A1:F10"), "SheetY.C5:J5")
  
在Python中

    doc.CopyToRange("SheetX.A1:F10", "SheetY.C5:J5")
  

    docA = ui.OpenDocument(r"C:\Documents\FileA.ods", hidden = True, readonly = True)
    docB = ui.OpenDocument(r"C:\Documents\FileB.ods")
    docB.CopyToRange(docA.Range("SheetX.A1:F10"), "SheetY.C5:J5")
  

CreateChart

Creates a new chart object showing the data in the specified range. The returned chart object can be further manipulated using the Chart service.

语法:

svc.CreateChart(chartname: str, sheetname: str, range: str, columnheader: bool = False, rowheader: bool = False): obj

参数:

chartname: The user-defined name of the chart to be created. The name must be unique in the same sheet.

sheetname: The name of the sheet where the chart will be placed.

range: The range to be used as the data source for the chart. The range may refer to any sheet of the Calc document.

columnheader: When True, the topmost row of the range is used as labels for the category axis or the legend (Default = False).

rowheader: When True, the leftmost column of the range is used as labels for the category axis or the legend. (Default = False).

示例:

The examples below in Basic and Python create a chart using the data contained in the range "A1:B5" of "Sheet1" and place the chart in "Sheet2".

在BASIC中

    Set oChart = oDoc.CreateChart("MyChart", "Sheet2", "Sheet1.A1:B5", RowHeader := True)
    oChart.ChartType = "Donut"
  
在Python中

    chart = doc.CreateChart("MyChart", "Sheet2", "Sheet1.A1:B5", rowheader=True)
    chart.ChartType = "Donut"
  
tip

Refer to the help page about ScriptForge's Chart service to learn more how to further manipulate chart objects. It is possible to change properties as the chart type, chart and axes titles and chart position.


CreatePivotTable

Creates a new pivot table with the properties defined by the arguments passed to the method.

A name must be provided for the pivot table. If a pivot table with the same name already exists in the targeted sheet, it will be replaced without warning.

This method returns a string containing the range where the new pivot table was placed.

语法:

svc.CreatePivotTable(pivottablename: str, sourcerange: str, targetcell: str, datafields: str[0..*], rowfields: str[0..*], columnfields: str[0..*], filterbutton: bool = true, rowtotals: bool = true, columntotals: bool = true): str

参数:

pivottablename: The user-defined name of the new pivot table.

sourcerange: The range containing the raw data, as a string. It is assumed that the first row contains the field names that are used by the pivot table.

targetcell: The top-left cell where the new pivot table will be placed. If a range is specified, only its top-left cell is considered.

datafields: It can be either a single string or an array containing strings that define field names and functions to be applied. When an array is specified, it must follow the syntax Array("FieldName[;Function]", ...).

The allowed functions are: Sum, Count, Average, Max, Min, Product, CountNums, StDev, StDevP, Var, VarP and Median. Function names must be provided in English. When all values are numerical, Sum is the default function, otherwise the default function is Count.

rowfields: A single string or an array with the field names that will be used as the pivot table rows.

columnfields: A single string or an array with the field names that will be used as the pivot table columns.

filterbutton: Determines whether a filter button will be displayed above the pivot table (Default = True).

rowtotals: Specifies if a separate column for row totals will be added to the pivot table (Default = True).

columntotals Specifies if a separate row for column totals will be added to the pivot table (Default = True)

示例:

在BASIC中

    Dim vData As Variant, oDoc As Object, ui As Object, sTable As String, sPivot As String
    Set ui = CreateScriptService("UI")
    Set oDoc = ui.CreateDocument("Calc")
    vData = Array(Array("Item", "State", "Team", "2002", "2003", "2004"), _
        Array("Books", "Michigan", "Jean", 14788, 30222, 23490), _
        Array("Candy", "Michigan", "Jean", 26388, 15641, 32849), _
        Array("Pens", "Michigan", "Jean", 16569, 32675, 25396), _
        Array("Books", "Michigan", "Volker", 21961, 21242, 29009), _
        Array("Candy", "Michigan", "Volker", 26142, 22407, 32841))
    sTable = oDoc.SetArray("A1", vData)
    sPivot = oDoc.CreatePivotTable("PT1", sTable, "H1", _
        Array("2002", "2003;count", "2004;average"), _ ' Three data fields
        "Item", _ ' A single row field
        Array("State", "Team"), False) ' Two column fields
  
在Python中

    ui = CreateScriptService("UI")
    doc = ui.CreateDocument("Calc")
    vData = [["Item", "State", "Team", "2002", "2003", "2004"],
             ["Books", "Michigan", "Jean", 14788, 30222, 23490],
             ["Candy", "Michigan", "Jean", 26388, 15641, 32849],
             ["Pens", "Michigan", "Jean", 16569, 32675, 25396)],
             ["Books", "Michigan", "Volker", 21961, 21242, 29009],
             ["Candy", "Michigan", "Volker", 26142, 22407, 32841]]
    sTable = doc.SetArray("A1", vData)
    sPivot = doc.CreatePivotTable("PT1", sTable, "H1",
                                  ["2002", "2003;count", "2004;average"],
                                  "Item",
                                  ["State", "Team"], False)
  
tip

To learn more about Pivot Tables in LibreOffice Calc, read the Pivot Table help page.


DAvg, DCount, DMax, DMin and DSum

Apply the functions Average, Count, Max, Min and Sum, respectively, to all the cells containing numeric values on a given range, excluding values from filtered and hidden rows and hidden columns, the same as for the status bar functions.

语法:

svc.DAvg(range: str): float

svc.DCount(range: str): float

svc.DMax(range: str): float

svc.DMin(range: str): float

svc.DSum(range: str): float

参数:

range: The range to which the function will be applied, as a string.

示例:

The example below applies the Sum function to the range "A1:A1000" of the currently selected sheet:

在BASIC中

      result = oDoc.DSum("~.A1:A1000")
  
在Python中

    result = myDoc.DSum("~.A1:A1000")
  
note

Cells in the given range that contain text will be ignored by all of these functions. For example, the DCount method will not count cells with text, only numerical cells.


ExportRangeToFile

Exports the specified range as an image or PDF file.

This method returns True if the destination file was successfully saved.

note

Hidden rows or columns in the specified range are not exported to the destination file.


语法:

svc.ExportRangeToFile(range: str, filename: str, imagetype: str = "pdf", overwrite: bool = False): bool

参数:

range: A sheet name or a cell range to be exported, as a string.

filename: The name of the file to be saved. It must follow the SF_FileSystem.FileNaming notation.

imagetype: Identifies the destination file type. Possible values are "jpeg", "pdf" (default) and "png".

overwrite: When set to True, the destination file may be overwritten (Default = False).

示例:

在BASIC中

    ' Exports the entire sheet as a PDF file
    oDoc.ExportRangeToFile("SheetX", "C:\Temp\image.pdf")
    ' Exports the range as a PNG file and overwrites the destination file if it exists
    oDoc.ExportRangeToFile("SheetX.A1:D10", "C:\Temp\image.png", "png", Overwrite := True)
  
在Python中

    doc.ExportRangeToFile("SheetX", r"C:\Temp\image.pdf")
    doc.ExportRangeToFile("SheetX.A1:D10", r"C:\Temp\image.png", "png", overwrite = True)
  

Forms

Depending on the parameters provided this method will return:

语法:

svc.Forms(sheetname: str): str[0..*]

svc.Forms(sheetname: str, form: str = ''): svc

svc.Forms(sheetname: str, form: int): svc

参数:

sheetname: The name of the sheet, as a string, from which the form will be retrieved.

form: The name or index corresponding to a form stored in the specified sheet. If this argument is absent, the method will return a list with the names of all forms available in the sheet.

示例:

In the following examples, the first line gets the names of all forms stored in "Sheet1" and the second line retrieves the Form object of the form named "Form_A" which is stored in "Sheet1".

在BASIC中

    Set FormNames = oDoc.Forms("Sheet1")
    Set FormA = oDoc.Forms("Sheet1", "Form_A")
  
在Python中

    form_names = doc.Forms("Sheet1")
    form_A = doc.Forms("Sheet1", "Form_A")
  

GetColumnName

Converts a column number ranging between 1 and 1024 into its corresponding letter (column 'A', 'B', ..., 'AMJ'). If the given column number is outside the allowed range, a zero-length string is returned.

语法:

svc.GetColumnName(columnnumber: int): str

参数:

columnnumber: The column number as an integer value in the interval 1 ... 16384.

示例:

在BASIC中

Displays a message box with the name of the third column, which by default is "C".


    MsgBox oDoc.GetColumnName(3)
  
在Python中

    bas = CreateScriptService("Basic")
    bas.MsgBox(myDoc.GetColumnName(3))
  
note

The maximum number of columns allowed on a Calc sheet is 16384.


GetFormula

Get the formula(s) stored in the given range of cells as a single string, a 1D or a 2D array of strings.

note

The names of Calc functions used in the returned formulas are expressed in English. Visit the Wiki page List of Calc Functions for a complete list of Calc functions in English.


语法:

svc.GetFormula(range: str): any

参数:

range: The range where to get the formulas from, as a string.

示例:

在BASIC中

The following example returns a 3 by 2 array with the formulas in the range "A1:B3" (3 rows by 2 columns):


    arrFormula = oDoc.GetFormula("~.A1:B3")
  
在Python中

    arrFormula = myDoc.GetFormula("~.A1:B3")
  

GetValue

Get the value(s) stored in the given range of cells as a single value, a 1D array or a 2D array. All values are either doubles or strings.

语法:

svc.GetValue(range: str): any

参数:

range: The range where to get the values from, as a string.

示例:

在BASIC中

      arrValues = oDoc.GetValue("~.B1:C100")
  
在Python中

    arrValues = myDoc.GetValue("~.B1:C100")
  
note

If a cell contains a date, the number corresponding to that date will be returned. To convert numeric values to dates in Basic scripts, use the Basic CDate builtin function. In Python scripts, use the CDate function from the Basic service.


ImportFromCSVFile

Imports the contents of a CSV-formatted text file and places it on a given destination cell.

The destination area is cleared of all contents and formats before inserting the contents of the CSV file. The size of the modified area is fully determined by the contents of the input file.

The method returns a string representing the modified range of cells.

语法:

svc.ImportFromCSVFile(filename: str, destinationcell: str, [filteroptions: str]): str

参数:

filename: Identifies the file to open. It must follow the SF_FileSystem.FileNaming notation.

destinationcell: The destination cell to insert the imported data, as a string. If instead a range is given, only its top-left cell is considered.

filteroptions: The arguments for the CSV input filter. The default filter makes following assumptions:

示例:

在BASIC中

    oDoc.ImportFromCSVFile("C:\Temp\myCSVFile.csv", "SheetY.C5")
  
在Python中

    myDoc.ImportFromCSVFile(r"C:\Temp\myCSVFile.csv", "SheetY.C5")
  
tip

To learn more about the CSV Filter Options, refer to the CSV Filter Options help page.


ImportFromDatabase

Imports the contents of a database table, query or resultset, i.e. the result of a SELECT SQL command, inserting it on a destination cell.

The destination area is cleared of all contents and formats before inserting the imported contents. The size of the modified area is fully determined by the contents in the table or query.

The method returns True when the import was successful.

语法:

svc.ImportFromDatabase(filename: str = "", registrationname: str = "", destinationcell: str = "", sqlcommand: str = "", directsql: bool): bool

参数:

filename: Identifies the file to open. It must follow the SF_FileSystem.FileNaming notation.

registrationname: The name to use to find the database in the databases register. This argument is ignored if a filename is provided.

destinationcell: The destination of the imported data, as a string. If a range is given, only its top-left cell is considered.

sqlcommand: A table or query name (without surrounding quotes or square brackets) or a SELECT SQL statement in which table and field names may be surrounded by square brackets or quotes to improve its readability.

directsql: When True, the SQL command is sent to the database engine without pre-analysis. Default is False. The argument is ignored for tables. For queries, the applied option is the one set when the query was defined.

示例:

在BASIC中

    oDoc.ImportFromDatabase("C:\Temp\myDbFile.odb", , "SheetY.C5", "SELECT * FROM [Employees] ORDER BY [LastName]")
  
在Python中

    myDoc.ImportFromDatabase(r"C:\Temp\myDbFile.odb", , "SheetY.C5", "SELECT * FROM [Employees] ORDER BY [LastName]")
  

ImportStylesFromFile

This method loads all the styles belonging to one or more style families from a closed file into the actual document. The actual document must be a Calc or a Writer document.

Are always imported together:

Returns True if styles were successfully imported.

语法:

svc.ImportStylesFromFile(filename: str, families: str[1..*], overwrite = False): bool

参数:

filename: The file from which to load the styles in the FileSystem notation. The file is presumed to be of the same document type as the actual document.

families: One of the style families present in the actual document, as a case-sensitive string or an array of such strings. Leave this argument blank to import all families.

overwrite: When True, the actual styles may be overwritten. Default is False.

示例:

在BASIC中

    oDoc.ImportStylesFromFile("C:\User\Documents\myFile.ods", "ParagraphStyles", True)
  
在Python中

    doc.ImportStylesFromFile('C:\User\Documents\myFile.ods', ("ParagraphStyles",), False)
  

InsertSheet

Inserts a new empty sheet before an existing sheet or at the end of the list of sheets.

语法:

svc.InsertSheet(sheetname: str, [beforesheet: any]): bool

参数:

sheetname: The name of the new sheet.

beforesheet: The name (string) or index (numeric, starting from 1) of the sheet before which to insert the new sheet. This argument is optional and the default behavior is to insert the sheet at the last position.

示例:

The following example inserts a new empty sheet named "SheetX" and places it before "SheetY":

在BASIC中

    oDoc.InsertSheet("SheetX", "SheetY")
  
在Python中

    myDoc.InsertSheet("SheetX", "SheetY")
  

MoveRange

Moves a specified source range to a destination range of cells. The method returns a string representing the modified range of cells. The dimension of the modified area is fully determined by the size of the source area.

语法:

svc.MoveRange(source: str, destination: str): str

参数:

source: The source range of cells, as a string.

destination: The destination cell, as a string. If a range is given, its top-left cell is considered as the destination.

示例:

在BASIC中

    oDoc.MoveRange("SheetX.A1:F10", "SheetY.C5")
  
在Python中

    myDoc.MoveRange("SheetX.A1:F10", "SheetY.C5")
  

MoveSheet

Moves an existing sheet and places it before a specified sheet or at the end of the list of sheets.

语法:

svc.MoveSheet(sheetname: str, [beforesheet: any]): bool

参数:

sheetname: The name of the sheet to move. The sheet must exist or an exception is raised.

beforesheet: The name (string) or index (numeric, starting from 1) of the sheet before which the original sheet will be placed. This argument is optional and the default behavior is to move the sheet to the last position.

示例:

The example below moves the existing sheet "SheetX" and places it before "SheetY":

在BASIC中

    oDoc.MoveSheet("SheetX", "SheetY")
  
在Python中

    myDoc.MoveSheet("SheetX", "SheetY")
  

Offset

Returns a new range (as a string) offset by a certain number of rows and columns from a given range.

This method has the same behavior as the homonymous Calc's Offset function.

语法:

svc.Offset(reference: str, rows: int = 0, columns: int = 0, [height: int], [width: int]): str

参数:

reference: The range, as a string, that the method will use as reference to perform the offset operation.

rows: The number of rows by which the initial range is offset upwards (negative value) or downwards (positive value). Use 0 (default) to stay in the same row.

columns: The number of columns by which the initial range is offset to the left (negative value) or to the right (positive value). Use 0 (default) to stay in the same column.

height: The vertical height for an area that starts at the new range position. Omit this argument when no vertical resizing is needed.

width: The horizontal width for an area that starts at the new range position. Omit this argument when no horizontal resizing is needed.

Arguments rows and columns must not lead to zero or negative start row or column.

Arguments height and width must not lead to zero or negative count of rows or columns.

示例:

在BASIC中

    oDoc.Offset("A1", 2, 2)
    'SheetX.$C$3 (A1 moved by two rows and two columns down)
    oDoc.Offset("A1", 2, 2, 5, 6)
    'SheetX.$C$3:$H$7 (A1 offset by two rows and columns with width of 5 rows and 6 columns)
  
在Python中

    myDoc.Offset("A1", 2, 2)
    myDoc.Offset("A1", 2, 2, 5, 6)
  

OpenRangeSelector

Opens a non-modal dialog that can be used to select a range in the document and returns a string containing the selected range.

note

This method opens the same dialog that is used by LibreOffice when the Shrink button is pressed. For example, the Tools - Goal Seek dialog has a Shrink button to the right of the Formula cell field.


This method does not change the current selection.

语法:

svc.OpenRangeSelector(opt title: str, opt selection: str, singlecell: bool = False, closeafterselect: bool = True): str

参数:

title: The title of the dialog, as a string.

selection: An optional range that is initially selected when the dialog is displayed.

singlecell: When True (default) only single-cell selection is allowed. When False range selection is allowed.

closeafterselect: When True (default) the dialog is closed immediately after the selection is made. When False the user can change the selection as many times as needed and then manually close the dialog.

示例:

在BASIC中

    Dim sRange as String
    sRange = oDoc.OpenRangeSelector(Title := "Select a range")
  
在Python中

    sRange = myDoc.OpenRangeSelector(title = "Select a range")
  

Printf

Returns the input string after substituting its token characters by their values in a given range.

This method does not change the current selection.

tip

This method can be used to quickly extract specific parts of a range name, such as the sheet name or first cell column and row, and use them to compose a new range address.


语法:

svc.Printf(inputstr: str, range: str, tokencharacter: str = "%"): str

参数:

inputstr: The string containing the tokens that will be replaced by the corresponding values in range.

range: A RangeName from which values will be extracted. If it contains a sheet name, the sheet must exist.

tokencharacter: Character used to identify tokens. By default "%" is the token character. The following tokens are accepted:

示例:

在BASIC中

The example below extracts each element of the RangeName defined in sRange and uses them to compose a message.


    Dim sRange as String, sInputStr as String
    sRange = "Sheet1.A1:E10"
    sInputStr = "Sheet name: %S" & Chr(10) & _
                "First row: %R1" & Chr(10) & _
                "First column %C1" & Chr(10) & _
                "Last row %R2" & Chr(10) & _
                "Last column %C2"
    MsgBox oDoc.Printf(sInputStr, sRange)
  

The Printf method can be combined with SetFormula to create formulas over multiple cells. For instance, consider a table with numeric values in the range "A1:E10" from which formulas are to be created to sum the values in each row and place the results in the range "F1:F10":


    Dim sFormula as String, sRange as String
    sRange = "A1:E10"
    ' Note the use of the "$" character
    sFormula = "=SUM($%C1%R1:$%C2%R1)"
    oDoc.SetFormula("F1:F10", oDoc.Printf(sFormula, sRange))
  
在Python中

    sRange = "Sheet1.A1:E10"
    sInputStr = "Sheet name: %S\n" \
                "First row: %R1\n" \
                "First column %C1\n" \
                "Last row %R2\n" \
                "Last column %C2"
    bas = CreateScriptService("Basic")
    bas.MsgBox(myDoc.Printf(sInputStr, sRange))
  

    sRange = "A1:E10
    sFormula = "=SUM($%C1%R1:$%C2%R1)"
    myDoc.SetFormula("F1:F10", myDoc.Printf(sFormula, sRange))
  

PrintOut

This method sends the contents of the given sheet to the default printer or to the printer defined by the SetPrinter method of the Document service.

Returns True if the sheet was successfully printed.

语法:

svc.PrintOut(opt sheetname: str, pages: str = "", copies: num = 1): bool

参数:

sheetname: The sheet to print, default is the active sheet.

pages: The pages to print as a string, like in the user interface. Example: "1-4;10;15-18". Default is all pages.

copies: The number of copies. Default is 1.

示例:

在BASIC中

    If oDoc.PrintOut("SheetX", "1-4;10;15-18", Copies := 2) Then
        ' ...
    End If
  
在Python中

    if doc.PrintOut('SheetX', copies=3, pages='45-88'):
        # ...
  

RemoveDuplicates

Removes duplicate rows from a specified range. The comparison to determine if a given row is a duplicate is done based on a subset of columns in the range.

This method returns a string containing the resulting range.

note

The removal of duplicate rows is done starting at the first row in the range moving downwards, meaning that if two or more rows are duplicates then only the first one is kept.


语法:

svc.RemoveDuplicates(range: str, opt columns: int[0..*], header: bool = False, casesensitive: bool = False, mode: str = "COMPACT"): str

参数:

range: The range from which duplicates will be removed, as a string.

columns: An array containing column numbers indicating which columns will be considered to determine if a row is a duplicate or not. If this argument is left blank, then only the first column is used. Items in this array must be in the interval between 1 and the range width.

header: Specifies whether the first row is a header row (Default = False).

casesensitive: Specifies whether string comparisons are case-sensitive (Default = False).

mode: Specifies what to do with duplicate rows. If mode = "CLEAR" then duplicates are simply removed from the sheet leaving the cells blank. If mode = "COMPACT" then duplicates are removed and empty rows are compacted up (Default = "COMPACT").

示例:

在BASIC中

    ' Removes duplicate rows where values in column A are duplicate
    ' Note that all optional arguments use their default value
    oDoc.RemoveDuplicates("A1:B10")
    ' Removes duplicate rows considering that the first row contains headers
    ' Columns A and B are used to determine if a row is a duplicate
    ' Cells containing duplicate values are left blank
    oDoc.RemoveDuplicates("A1:D10", columns := Array(1, 2), header := True, mode := "CLEAR")
  
在Python中

    myDoc.RemoveDuplicates("A1:B10")
    myDoc.RemoveDuplicates("A1:D10", columns = (1, 2), header = True, mode = "CLEAR")
  

RemoveSheet

Removes an existing sheet from the document.

语法:

svc.RemoveSheet(sheetname: str): bool

参数:

sheetname: The name of the sheet to remove.

示例:

在BASIC中

    oDoc.RemoveSheet("SheetY")
  
在Python中

    myDoc.RemoveSheet("SheetY")
  

RenameSheet

Renames the given sheet and returns True if successful.

语法:

svc.RenameSheet(sheetname: str, newname: str): bool

参数:

sheetname: The name of the sheet to rename.

newname: the new name of the sheet. It must not exist yet.

示例:

This example renames the active sheet to "SheetY":

在BASIC中

    oDoc.RenameSheet("~", "SheetY")
  
在Python中

    mydoc.RenameSheet("~", "SheetY")
  

SetArray

Stores the given value starting from a specified target cell. The updated area expands itself from the target cell or from the top-left corner of the given range to accommodate the size of the input value argument. Vectors are always expanded vertically.

The method returns a string representing the modified area as a range of cells.

语法:

svc.SetArray(targetcell: str, value: any): str

参数:

targetcell: The cell or a range as a string from where to start to store the given value.

value: A scalar, a vector or an array (in Python, one or two-dimensional lists and tuples) with the new values to be stored from the target cell or from the top-left corner of the range if targetcell is a range. The new values must be strings, numeric values or dates. Other types will cause the corresponding cells to be emptied.

示例:

在BASIC中

The following example uses the builtin DimArray function to create an array and then store it in cell "A1":


    Dim arrData as Variant
    arrData = DimArray(2, 1)
    arrData(0, 0) = 1 : arrData(1, 0) = 2 : arrData(2, 0) = 3
    arrData(0, 1) = "One" : arrData(1, 1) = "Two" : arrData(2, 1) = "Three"
    oDoc.SetArray("Sheet1.A1", arrData)
  

This example uses the RangeInit method of the ScriptForge Array service to create an array with values that are then stored from cell "A1" and downwards.


    'Fill 1st column with values from 1 to 1000
    oDoc.SetArray("Sheet1.A1", SF_Array.RangeInit(1, 1000))
  
在Python中

    arrData = ((1, "One"), (2, "Two"), (3, "Three"))
    myDoc.SetArray("Sheet1.A1", arrData)
  

    myDoc.SetArray("Sheet1.A1", tuple(i + 1 for i in range(1000)))
  
tip

To dump the full contents of an array in a sheet, use SetArray. To dump the contents of an array only within the boundaries of the targeted range of cells, use SetValue.


SetCellStyle

Applies the specified cell style to the given target range. The full range is updated and the remainder of the sheet is left untouched. If the cell style does not exist, an error is raised.

The method returns a string representing the modified area as a range of cells.

语法:

svc.SetCellStyle(targetrange: str, style: str, opt filterformula: str, opt filterscope: str): str

参数:

targetrange: The range to which the style will be applied, as a string.

style: The name of the cell style to apply.

filterformula: A Calc formula that shall be applied to the given range to determine which cells will be affected. The specified formula must return True or False. If this argument is not specified, then all cells in the range are affected.

filterscope: Determines how filterformula is expanded to the given range. This argument is mandatory if a filterformula is specified. The following values are accepted:

示例:

在BASIC中

    oDoc.SetCellStyle("A1:J1", "Heading 1")
    oDoc.SetCellStyle("A2:J100", "Neutral")
  
在Python中

    myDoc.SetCellStyle("A1:J1", "Heading 1")
    myDoc.SetCellStyle("A2:J100", "Neutral")
  
tip

Refer to the ClearAll method documentation for examples on how to use the arguments filterformula and filterscope.


SetFormula

Inserts the given (array of) formula(s) in the specified range. The size of the modified area is equal to the size of the range.

The method returns a string representing the modified area as a range of cells.

语法:

svc.SetFormula(targetrange: str, formula: any): str

参数:

targetrange: The range to insert the formulas, as a string.

formula: A string, a vector or an array of strings with the new formulas for each cell in the target range.

The full range is updated and the remainder of the sheet is left unchanged.

If the given formula is a string, the unique formula is pasted along the whole range with adjustment of the relative references.

If the size of formula is smaller than the size of targetrange, then the remaining cells are emptied.

If the size of formula is larger than the size of targetrange, then the formulas are only partially copied until it fills the size of targetrange.

Vectors are always expanded vertically, except if targetrange has a height of exactly 1 row.

note

Calc functions used in the formula argument must be expressed using their English names. Visit the Wiki page List of Calc Functions for a complete list of Calc functions in English.


示例:

在BASIC中

    oDoc.SetFormula("A1", "=A2")
    'Horizontal vector, partially empty
    oDoc.SetFormula("A1:F1", Array("=A2", "=B2", "=C2+10"))
    'D2 contains the formula "=H2"
    oDoc.SetFormula("A1:D2", "=E1")
  
在Python中

    myDoc.SetFormula("A1", "=A2")
    myDoc.SetFormula("A1:F1", ("=A2", "=B2", "=C2+10"))
    myDoc.SetFormula("A1:D2", "=E1")
  

SetValue

Stores the given value in the specified range. The size of the modified area is equal to the size of the target range.

The method returns a string representing the modified area as a range of cells.

语法:

svc.SetValue(targetrange: str, value: any): str

参数:

targetrange: The range where to store the given value, as a string.

value: A scalar, a vector or an array with the new values for each cell of the range. The new values must be strings, numeric values or dates. Other types will cause the corresponding cells to be emptied.

The full range is updated and the remainder of the sheet is left unchanged. If the size of value is smaller than the size of targetrange, then the remaining cells will be emptied.

If the size of value is larger than the size of targetrange, then value is only partially copied until it fills the size of targetrange.

Vectors are expanded vertically, except if targetrange has a height of exactly 1 row.

示例:

在BASIC中

    oDoc.SetValue("A1", 2)
    'Below the Value array is smaller than the TargetRange (remaining cells are emptied)
    oDoc.SetValue("A1:F1", Array(1, 2, 3))
    'Below the Value and TargetRange have the same size
    oDoc.SetValue("A1:D2", SF_Array.AppendRow(Array(1, 2, 3, 4), Array(5, 6, 7, 8)))
  

If you want to fill a single row with values, you can use the Offset function. In the example below, consider that arrData is a one-dimensional array:


    Dim firstCell As String : firstCell = "A1"
    Dim lenArray As Integer : lenArray = UBound(arrData) - LBound(arrData) + 1
    Dim newRange As String : newRange = oDoc.Offset(firstCell, width = lenArray)
    oDoc.SetValue(newRange, arrData)
  
在Python中

    myDoc.SetValue("A1", 2)
    myDoc.SetValue("A1:F1", (1, 2, 3))
    myDoc.SetValue("A1:D2", ((1, 2, 3, 4), (5, 6, 7, 8)))
  

    firstCell = "A1"
    newRange = doc.Offset(firstCell, width = len(arrData))
    doc.SetValue(newRange, arrData)
  

ShiftDown

Moves a given range of cells downwards by inserting empty rows. The current selection is not affected.

Depending on the value of the wholerow argument the inserted rows can either span the width of the specified range or span all columns in the row.

This method returns a string representing the new location of the initial range.

note

If the shifted range exceeds the sheet edges, then nothing happens.


语法:

svc.ShiftDown(range: str, wholerow: bool = False, opt rows: int): str

参数:

range: The range above which rows will be inserted, as a string.

wholerow: If set to False (default), then the width of the inserted rows will be the same as the width of the specified range. Otherwise, the inserted row will span all columns in the sheet.

rows: The number of rows to be inserted. The default value is the height of the original range. The number of rows must be a positive number.

示例:

在BASIC中

    ' Moves the range "A3:D3" down by one row; affects only columns A to D
    oDoc.ShiftDown("A3:D3")
    ' The inserted row spans all columns in the sheet
    oDoc.ShiftDown("A3:D3", WholeRow := True)
    ' Moves the range "A3:D3" down by five rows
    oDoc.ShiftDown("A3:D3", Rows := 5)
    ' Moves the range "A3:D10" down by two rows and shows the new location of the original range
    Dim sNewRange as String
    sNewRange = oDoc.ShiftDown("A3:D10", Rows := 2)
    MsgBox sNewRange   ' $Sheet1.$A$5:$D$12
  
在Python中

    myDoc.ShiftDown("A3:D3")
    myDoc.ShiftDown("A3:D3", wholerow = True)
    myDoc.ShiftDown("A3:D3", rows = 5)
    sNewRange = myDoc.ShiftDown("A3:D10", rows = 2)
    bas = CreateScriptService("Basic")
    bas.MsgBox(sNewRange)
  

ShiftLeft

Deletes the leftmost columns of a given range and moves to the left all cells to the right of the affected range. The current selection is not affected.

Depending on the value of the wholecolumn argument the deleted columns can either span the height of the specified range or span all rows in the column.

This method returns a string representing the location of the remaining portion of the initial range. If all cells in the original range have been deleted, then an empty string is returned.

语法:

svc.ShiftLeft(range: str, wholecolumn: bool = False, opt columns: int): str

参数:

range: The range from which cells will be deleted, as a string.

wholecolumn: If set to False (default), then the height of the deleted columns will be the same as the height of the specified range. Otherwise, the deleted columns will span all rows in the sheet.

columns: The number of columns to be deleted from the specified range. The default value is the width of the original range, which is also the maximum value of this argument.

示例:

在BASIC中

    ' Deletes the range "B3:B6"; moves left all cells to the right
    oDoc.ShiftLeft("B3:B6")
    ' Deletes the first column in the range "A3:D6"
    oDoc.ShiftLeft("A3:D6", Columns := 1)
    ' The deleted columns (A to D) spans all rows in the sheet
    oDoc.ShiftLeft("A3:D6", WholeColumn := True)
  
在Python中

    myDoc.ShiftLeft("B3:B6")
    myDoc.ShiftLeft("A3:D6", Columns = 1)
    myDoc.ShiftLeft("A3:D6", WholeColumn = True)
  

ShiftUp

Deletes the topmost rows of a given range and moves upwards all cells below the affected range. The current selection is not affected.

Depending on the value of the wholerow argument the deleted rows can either span the width of the specified range or span all columns in the row.

This method returns a string representing the location of the remaining portion of the initial range. If all cells in the original range have been deleted, then an empty string is returned.

语法:

svc.ShiftUp(range: str, wholerow: bool = False, opt rows: int): str

参数:

range: The range from which cells will be deleted, as a string.

wholerow: If set to False (default), then the width of the deleted rows will be the same as the width of the specified range. Otherwise, the deleted row will span all columns in the sheet.

rows: The number of rows to be deleted from the specified range. The default value is the height of the original range, which is also the maximum value of this argument.

示例:

在BASIC中

    ' Deletes the range "A3:D3"; moves all cells below it by one row up
    oDoc.ShiftUp("A3:D3")
    ' Deletes the first row in the range "A3:D6"
    oDoc.ShiftUp("A3:D6", Rows := 1)
    ' The deleted rows spans all columns in the sheet
    oDoc.ShiftUp("A3:D6", WholeRow := True)
  
在Python中

    myDoc.ShiftUp("A3:D3")
    myDoc.ShiftUp("A3:D6", rows = 1)
    myDoc.ShiftUp("A3:D6", wholerow = True)
  

ShiftRight

Moves a given range of cells to the right by inserting empty columns. The current selection is not affected.

Depending on the value of the wholecolumn argument the inserted columns can either span the height of the specified range or span all rows in the column.

This method returns a string representing the new location of the initial range.

note

If the shifted range exceeds the sheet edges, then nothing happens.


语法:

svc.ShiftRight(range: str, wholecolumn: bool = False, opt columns: int): str

参数:

range: The range which will have empty columns inserted to its left, as a string.

wholecolumn: If set to False (default), then the height of the inserted columns will be the same as the height of the specified range. Otherwise, the inserted columns will span all rows in the sheet.

columns: The number of columns to be inserted. The default value is the width of the original range.

示例:

在BASIC中

    ' Moves the range "A3:A6" right by one column; affects only rows 3 to 6
    oDoc.ShiftRight("A3:A6")
    ' Moves the range "A3:A6" right by five columns
    oDoc.ShiftRight("A3:A6", Columns := 5)
    ' The inserted column spans all rows in the sheet
    oDoc.ShiftRight("A3:A6", WholeColumn := True)
  
在Python中

    myDoc.ShiftRight("A3:A6")
    myDoc.ShiftRight("A3:A6", columns = 5)
    myDoc.ShiftRight("A3:A6", wholecolumn = True)
  

SortRange

Sort the given range on any number of columns/rows. The sorting order may vary by column/row. If the number of sort keys is > 3 then the range is sorted several times, by groups of 3 keys, starting from the last key. It returns a string representing the modified range of cells. The size of the modified area is fully determined by the size of the source area.

语法:

svc.SortRange(range: str, sortkeys: any, sortorder: any = "ASC", destinationcell: str = "", containsheader: bool = False, casesensitive: bool = False, sortcolumns: bool = False): str

参数:

range: The range to be sorted, as a string.

sortkeys: A scalar (if 1 column/row) or an array of column/row numbers starting from 1.

sortorder: A scalar or an array of strings containing the values "ASC" (ascending), "DESC" (descending). Each item is paired with the corresponding item in sortkeys. If the sortorder array is shorter than sortkeys, the remaining keys are sorted in ascending order.

destinationcell: The destination cell of the sorted range of cells, as a string. If a range is given, only its top-left cell is considered. By default the source Range is overwritten.

containsheader: When True, the first row/column is not sorted.

casesensitive: Only for string comparisons. Default = False

sortcolumns: When True, the columns are sorted from left to right. Default = False : rows are sorted from top to bottom.

示例:

在BASIC中

    'Sort range based on columns A (ascending) and C (descending)
    oDoc.SortRange("A2:J200", Array(1, 3), Array("ASC", "DESC"), CaseSensitive := True)
  
在Python中

    myDoc.SortRange("A2:J200", (1, 3), ("ASC", "DESC"), casesensitive = True)
  
warning

All ScriptForge Basic routines or identifiers that are prefixed with an underscore character "_" are reserved for internal use. They are not meant be used in Basic macros or Python scripts.


请支持我们!