ھۆججەت

Open the Arrows toolbar, where you can add straight lines, lines with arrows, and dimension lines to the current slide or page.

Tip Icon

If you want, you can add an arrow after you draw a line by choosing Format - Line, and then selecting an arrow style from the Style box.


سىزىق

Draws a straight line where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

سىزىق

يا ئوقى باشلىق سىزىق ئاخىرى

Draws a straight line that ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

يا ئوقى باشلىق سىزىق ئاخىرى

ئوقيا باشلىق/يۇمىلاق باشلىق سىزىق

Draws a straight line that starts with an arrow and ends with a circle where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

ئوقيا باشلىق/يۇمىلاق باشلىق سىزىق

ئوقيا باشلىق/چاسا باشلىق سىزىق

Draws a straight line that starts with an arrow and ends with a square where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

ئوقيا باشلىق/چاسا باشلىق سىزىق

سىزىق (45°)

Draws a straight line that is constrained by angles of 45 degrees.

سىنبەلگە

سىزىق (45°)

يا ئوقى باشلىق سىزىق بېشى

Draws a straight line that starts with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

يا ئوقى باشلىق سىزىق بېشى

يۇمىلاق باشلىق/ئوقيا باشلىق سىزىق

Draws a straight line that starts with a circle and ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

يۇمىلاق باشلىق/ئوقيا باشلىق سىزىق

چاسا باشلىق/ئوقيا باشلىق سىزىق

Draws a straight line that starts with a square and ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

چاسا باشلىق/ئوقيا باشلىق سىزىق

ئۆلچەملىك سىزىق

Draws a line that displays the dimension length bounded by guides. Dimension lines automatically calculate and display linear dimensions. To draw a dimension line, open the Arrows toolbar, and click the Dimension Line icon. Move your pointer to where you want the line to start and drag to draw the dimension line. Release when finished.

Tip Icon

If you want the dimension line to be the same length as the side of a nearby object, hold down the key while dragging. To constrain the dimension line to 45 degrees, hold down the Shift key while dragging.


In LibreOffice Draw, a dimension line is always inserted on the layer called Dimension Lines. If you set that layer to invisible, you will not see any dimension line in your drawing.

سىنبەلگە

ئۆلچەملىك سىزىق

ئوقيا باشلىق سىزىق

Draws a straight line with arrows at both ends where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag.

سىنبەلگە

ئوقيا باشلىق سىزىق

Please support us!