Функтсияҳои ҷадвали электронӣ

Ин қисм шарҳи Функтсияҳои ҷадвали электронӣ ро бо мисолҳояш меоварад.

[text/scalc/01/func_error_type.xhp#error_type_head not found].

Returns a number representing a specific Error type, or the error value #N/A, if there is no error.

STYLE

Applies a style to the cell containing the formula.

ADDRESS

Адрес (ҳавола)и чашмакро мувофиқи рақамҳои сатр ва сутун медиҳад. Метавонед муқаррар созед, ки адрес мутлақ (мисол $A$1) ё нисбӣ (мисол A1) ё омехта (A$1 ё $A1) бошад. Ҳамчунин номи варақро муқаррар карда метавонед.

For interoperability the ADDRESS and INDIRECT functions support an optional parameter to specify whether the R1C1 address notation instead of the usual A1 notation should be used.

In ADDRESS, the parameter is inserted as the fourth parameter, shifting the optional sheet name parameter to the fifth position.

In INDIRECT, the parameter is appended as the second parameter.

In both functions, if the argument is inserted with the value 0, then the R1C1 notation is used. If the argument is not given or has a value other than 0, then the A1 notation is used.

In case of R1C1 notation, ADDRESS returns address strings using the exclamation mark '!' as the sheet name separator, and INDIRECT expects the exclamation mark as sheet name separator. Both functions still use the dot '.' sheet name separator with A1 notation.

When opening documents from ODF 1.0/1.1 format, the ADDRESS functions that show a sheet name as the fourth parameter will shift that sheet name to become the fifth parameter. A new fourth parameter with the value 1 will be inserted.

When storing a document in ODF 1.0/1.1 format, if ADDRESS functions have a fourth parameter, that parameter will be removed.

ADDRESS(Row; Column [; Abs [; A1 [; "Sheet"]]])

row рақами сатри чашмак

column рақами сутуни чашмак (на ҳарф)

abs типи шавола:

1: мутлақ ($A$1)

2: ҳаволаи сатр мутлақ; ҳаволаи сутун нисбӣ (A$1)

3: сатр нисбӣ; сутун мутлақ ($A1)

4: нисбӣ (A1)

A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used.

sheet номи варақ.

Намуна:

ADDRESS(1; 1; 2; "Sheet2") натиҷа: Sheet2.A$1

If the formula above is in cell B2 of current sheet, and the cell A1 in sheet 2 contains the value -6, you can refer indirectly to the referenced cell using a function in B2 by entering =ABS(INDIRECT(B2)). The result is the absolute value of the cell reference specified in B2, which in this case is 6.

AREAS

Рақами ҳар як диапазони алоҳидаро медиҳад.

The function expects a single argument. If you state multiple ranges, you must enclose them into additional parentheses. Multiple ranges can be entered using the semicolon (;) as divider, but this gets automatically converted to the tilde (~) operator. The tilde is used to join ranges.

AREAS(Reference)

Ҳавола ҳаволаро ба чашмак ё диапазони чашмакҳо мефаҳмонад.

=AREAS(A1:B3;F2;G1) натиҷа 3.

=AREAS(All) натиҷа 1. Далелҳо - Муайянсозии Қитъа.

CHOOSE

Индексро истифода карда арзишеро аз миёни 30 арзиш медиҳад.

CHOOSE(Index; Value 1 [; Value 2 [; ... [; Value 30]]])

Index ҳавола ё рақам аз миёни 1 то 30, ки гирифтани кадом арзишро муайян мекунад.

Value 1, Value 2, ..., Value 30 is the list of values entered as a reference to a cell or as individual values.

=CHOOSE(A1; B1; B2; B3; "Today"; "Yesterday"; "Tomorrow"), мисол таркиби чашмаки B2 медиҳад барои A1 = 2; барои A1 = 4, матни "Today"-ро медиҳад.

COLUMN

Returns the column number of a cell reference. If the reference is a cell the column number of the cell is returned; if the parameter is a cell area, the corresponding column numbers are returned in a single-row array if the formula is entered as an array formula. If the COLUMN function with an area reference parameter is not used for an array formula, only the column number of the first cell within the area is determined.

COLUMN([Reference])

Reference ҳавола ба чашмак ё диапазони чашмакҳо, ки рақами сутуни аввали он ёфта шавад.

Агар ҳавола дохил карда нашудабошад, рақами сутуни чашмаки формуладор интихоб мешавад. LibreOffice Calc автоматӣ ҳаволаро ба чашмаки ҷорӣ мегузорад.

=COLUMN(A1) баробар ба 1. Сутуни A сутуни аввали варақ мебошад.

=COLUMN(C3:E3) баробар ба 3. Сутуни С сутуни сеюми варақ мебошад.

=COLUMN(D3:G10) баробар ба 4 барои он, ки сутуни D сутуни чоруми варақ ва функтсияи COLUMN ҳамчун формулаи массив истифода нашудааст.

{=COLUMN(B2:B7)} ва =COLUMN(B2:B7) ҳарду баробар ба 2 барои он, ки ҳавола танҳо сутуни B ро дорад.

=COLUMN() баробар ба 3 агар формула дар сутуни C бошад.

{=COLUMN(Rabbit)} массиви яксатраи (3, 4) бармегардонад агар "Rabbit" диапазони нодор бошад (C1:D3).

COLUMNS

Рақами сутунҳоро дар ҳаволаи додашуда медиҳад.

COLUMNS(Array)

array ҳавола ба дипазони чашмакҳо, ки шумораи умумии сутунҳояро муайян кардан лозим аст.

=Columns(B5) натиҷа 1 барои он, ки чашмак дар як сутун аст.

=COLUMNS(A1:C5) натиҷа 3. Ҳавола ба се сутун таалуқ дорад.

=COLUMNS(Rabbit) натиҷа 2 агар "Rabbit" диапазони номдори (C1:D3) бошад.

DDE

Натиҷаи ҳаволаи DDE-ро медиҳад. Агар арзиши диапазони ҳаволашуда тағир ёбад, арзиши баргардондашуда низ тағир меёбад. Бо интихобиИслоҳкунӣ - Ҳаволаҳо истифода карда натиҷаро бинед. Ҳавола миёни платформаҳо, яъне LibreOffice дар Windows ба ҳуҷҷати дар Linux сохташуда имкон надорад.

DDE("Server"; "File"; "Range" [; Mode])

Server is the name of a server application. LibreOffice applications have the server name "soffice".

File номи пурраи дафтар.

Range диапазоне, ки далел дорад.

Mode (ихтиёрӣ).

Mode	Effect
0 ё нест	Формати рақам аз чашмак "Аслӣ"
1	Далелҳо ҳамеша дар стандарти Англисии ШМА
2	Далелҳо ҳамчун матн баровада мешаванд

=DDE("soffice";"c:\office\document\data1.ods";"sheet1.A1") reads the contents of cell A1 in sheet1 of the LibreOffice Calc spreadsheet data1.ods.

=DDE("soffice";"c:\office\document\motto.odt";"Today's motto") returns a motto in the cell containing this formula. First, you must enter a line in the motto.odt document containing the motto text and define it as the first line of a section named Today's Motto (in LibreOffice Writer under Insert - Section). If the motto is modified (and saved) in the LibreOffice Writer document, the motto is updated in all LibreOffice Calc cells in which this DDE link is defined.

ERRORTYPE

Рақами ба арзиши хато ки дар дигар чашмак рух додааст медиҳад.

ERRORTYPE(Reference)

Reference адреси чашмаки хатодор.

Агар чашмаки A1 хатои Err:518ро нишон диҳад, функтсияи =ERRORTYPE(A1) рақами 518ро нишон медиҳад.

ORG.OPENOFFICE.ERRORTYPE

GETPIVOTDATA

The GETPIVOTDATA function returns a result value from a pivot table. The value is addressed using field and item names, so it remains valid if the layout of the pivot table changes.

Two different syntax definitions can be used:

GETPIVOTDATA(TargetField; pivot table[; Field 1; Item 1][; ... [Field 126; Item 126]])

or

GETPIVOTDATA(pivot table; Constraints)

The second syntax is assumed if exactly two parameters are given, of which the first parameter is a cell or cell range reference. The first syntax is assumed in all other cases. The Function Wizard shows the first syntax.

First Syntax

TargetField is a string that selects one of the pivot table's data fields. The string can be the name of the source column, or the data field name as shown in the table (like "Sum - Sales").

pivot table is a reference to a cell or cell range that is positioned within a pivot table or contains a pivot table. If the cell range contains several pivot tables, the table that was created last is used.

If no Field n / Item n pairs are given, the grand total is returned. Otherwise, each pair adds a constraint that the result must satisfy. Field n is the name of a field from the pivot table. Item n is the name of an item from that field.

If the pivot table contains only a single result value that fulfills all of the constraints, or a subtotal result that summarizes all matching values, that result is returned. If there is no matching result, or several ones without a subtotal for them, an error is returned. These conditions apply to results that are included in the pivot table.

If the source data contains entries that are hidden by settings of the pivot table, they are ignored. The order of the Field/Item pairs is not significant. Field and item names are not case-sensitive.

If no constraint for a filter is given, the field's selected value is implicitly used. If a constraint for a filter is given, it must match the field's selected value, or an error is returned. Filters are the fields at the top left of a pivot table, populated using the "Filters" area of the pivot table layout dialog. From each filter, an item (value) can be selected, which means only that item is included in the calculation.

Subtotal values from the pivot table are only used if they use the function "auto" (except when specified in the constraint, see Second Syntax below).

Second Syntax

NOM даромади номиналӣ

Constraints is a space-separated list. Entries can be quoted (single quotes). The whole string must be enclosed in quotes (double quotes), unless you reference the string from another cell.

One of the entries can be the data field name. The data field name can be left out if the pivot table contains only one data field, otherwise it must be present.

Each of the other entries specifies a constraint in the form Field[Item] (with literal characters [ and ]), or only Item if the item name is unique within all fields that are used in the pivot table.

A function name can be added in the form Field[Item;Function], which will cause the constraint to match only subtotal values which use that function. The possible function names are Sum, Count, Average, Max, Min, Product, Count (Numbers only), StDev (Sample), StDevP (Population), Var (Sample), and VarP (Population), case-insensitive.

HLOOKUP

Арзишро аз диапазони додашуда берун ҷустуҷӯ мекунад. Ин функтсия месанҷад, ки сатри аввали массив арзиши додашударо дорад. Функтсия арзиши сатри массиро кӣ дар Index омадааст, дар ҳамон сутун медиҳад.

HLOOKUP(Lookup; Array; Index [; SortedRangeLookup])

For an explanation on the parameters, see: VLOOKUP (columns and rows are exchanged)

Suppose we have built a small database table occupying the cell range A1:DO4 and containing basic information about 118 chemical elements. The first column contains the row headings “Element”, “Symbol”, “Atomic Number”, and “Relative Atomic Mass”. Subsequent columns contain the relevant information for each of the elements, ordered left to right by atomic number. For example, cells B1:B4 contain “Hydrogen”, “H”, “1” and “1.008”, while cells DO1:DO4 contain “Oganesson”, “Og”, “118”, and “294”.

	A	B	C	D	...	DO
1	Element	Hydrogen	Helium	Lithium	...	Oganesson
2	Symbol	H	He	Li	...	Og
3	Atomic Number	1	2	3	...	118
4	Relative Atomic Mass	1.008	4.0026	6.94	...	294

=HLOOKUP("Lead"; $A$1:$DO$4; 2; 0) returns “Pb”, the symbol for lead.

=HLOOKUP("Gold"; $A$1:$DO$4; 3; 0) returns 79, the atomic number for gold.

=HLOOKUP("Carbon"; $A$1:$DO$4; 4; 0) returns 12.011, the relative atomic mass of carbon.

HYPERLINK

Вақте, ки шумо чашмаки функтсияи HYPERLINK-дорро пахш мекунед, гиперҳавола кушода мешавад.

If you use the optional CellValue parameter, the formula locates the URL, and then displays the text or number.

HYPERLINK("URL" [; CellValue])

URL specifies the link target. The optional CellValue parameter is the text or a number that is displayed in the cell and will be returned as the result. If the CellValue parameter is not specified, the URL is displayed in the cell text and will be returned as the result.

The number 0 is returned for empty cells and matrix elements.

=HYPERLINK("http://www.example.org") displays the text "http://www.example.org" in the cell and executes the hyperlink http://www.example.org when clicked.

=HYPERLINK("http://www.example.org";"Click here") displays the text "Click here" in the cell and executes the hyperlink http://www.example.org when clicked.

=HYPERLINK("http://www.example.org";12345) displays the number 12345 and executes the hyperlink http://www.example.org when clicked.

=HYPERLINK($B4) where cell B4 contains http://www.example.org. The function adds http://www.example.org to the URL of the hyperlink cell and returns the same text which is used as formula result.

=HYPERLINK("http://www.";"Click ") & "example.org" displays the text Click example.org in the cell and executes the hyperlink http://www.example.org when clicked.

=HYPERLINK("#Sheet1.A1";"Go to top") displays the text Go to top and jumps to cell Sheet1.A1 in this document.

=HYPERLINK("file:///C:/writer.odt#Specification";"Go to Writer bookmark") displays the text "Go to Writer bookmark", loads the specified text document and jumps to bookmark "Specification".

=HYPERLINK("file:///C:/Documents/";"Open Documents folder") displays the text "Open Documents folder" and shows the folder contents using the standard file manager in your operating system.

INDEX

INDEX returns a reference, a value or an array of values from a reference range, specified by row and column index number or array of row and array of columns index numbers, and an optional range index.

INDEX() returns a reference if the argument is one or more references. When used in a cell in the form =INDEX(), the reference is resolved and the values displayed. When INDEX() is used in arguments of other functions, =FUNCTION(INDEX()...), the function gets the reference passed that was returned by INDEX(). Returning a reference is different from returning an array of values for functions that handles them differently.

INDEX(Reference [; [Row] [; [Column] [; Range]]])

Reference is a reference, entered either directly or by specifying a range name. If the reference consists of multiple ranges, you must enclose the list of references or range names in parentheses, or either use the tilde (~) range concatenation operator or define a named range with multiple areas.

Row (optional) represents the row or the array of row indexes of the reference range, for which to return a value. In case of zero or omitted (no specific row) all referenced rows are returned.

Column (optional) represents the column or array of column indexes of the reference range, for which to return a value. In case of zero or omitted (no specific column) all referenced columns are returned.

Range (optional) represents the index of the subrange if referring to a multiple range, default is 1.

{=INDEX({1,3,5;7,9,10},{2;1},1)} return a 2 row array containing 7 and 1. The row index {2;1} pick row 2 then row 1. The columns index 1 picks the first column.

{=INDEX(D3:G12,{1;2;3;4},{3,1})} return a 4 rows by 2 columns array. The row index array {1;2;3;4} picks rows 3 to 6 and {3;1} picks the third (F) and first column (D). Columns 1 and 3 of the source reference are swapped in the resulting array.

=INDEX(Prices;4;1) арзиши сатри 4 ва сутуни 1 бармегардонад аз диапазони МД аз Далелҳо - Муайянкунӣ ҳамчун Нархҳо.

=INDEX(SumX;4;1) returns the value from the range SumX in row 4 and column 1 as defined in Sheet - Named Ranges and Expressions - Define.

{=INDEX(A1:B6;1)} returns the values of the first row of A1:B6. Enter the formula as an array formula.

{=INDEX(A1:B6;0;1)} returns the values of the first column of A1:B6. Enter the formula as an array formula.

=INDEX(A1:B6;1;1) арзиши чапи болои диапазони A1:B6-ро мефаҳмонад.

{=INDEX((A1:B6;C1:D6);0;0;2)} returns the values of the second range C1:D6 of the multiple range. Enter the formula as an array formula.

INDIRECT

Ҳаволаи бо сатри матнӣ додашударо бармегардонад.

INDIRECT(Ref [; A1])

ref ҳавола ба чашмаке, ки аз он таркибашро бармегардонад.

A1 (optional) - if set to 0, the R1C1 notation is used. If this parameter is absent or set to another value than 0, the A1 notation is used.

=INDIRECT(A1) баробар аст ба 100 агар A1 дорои C108 ҳамчун ҳавола ва чашмаки C108 арзиши 100 дошта бошад.

=SUM(INDIRECT("a1:" & ADDRESS(1;3))) суммаи A1:C1 -ро медиҳад.

LOOKUP

Returns the contents of a cell either from a one-row or one-column range. Optionally, the assigned value (of the same index) is returned in a different column and row. As opposed to VLOOKUP and HLOOKUP, search and result vector may be at different positions; they do not have to be adjacent. Additionally, the search vector for the LOOKUP must be sorted ascending, otherwise the search will not return any usable results.

LOOKUP(Lookup; SearchVector [; ResultVector])

Lookup is the value of any type to be looked for; entered either directly or as a reference.

Search vector диапазони яксатра ё яксутуна, ки ҷустуҷӯ карда мешавад.

result_vector диапазони яксатра ё яксутуна, ки аз он натиҷа гирифта мешавад.

=LOOKUP(A1; D1:D100;F1:F100) чашмаки мувофиқро дар D1:D100 ҷустуҷӯ мекунад барои критерияи дар A1 буда. Барои мавқеи ёфтшуда, мисол 12ум чашмак индекс муайян карда мешавад. Пас натиҷа аз чашмаки 12уми сутун дар натиҷа оварда мешавад.

MATCH

Ҷойгиршавии нисбии элементро дар массив, ки ба арзиши додашуда рост меояд бармегардонад.

MATCH(Search; LookupArray [; Type])

Search is the value which is to be searched for in the single-row or single-column array.

lookup_arrayҳаволаи ҷустуҷӯшуда. lookup array метавонад сатр ё сутун ё қисми он бошад.

Type арзишҳои 1, 0, ё -1 мегирад. .

If Type = 0, only exact matches are found. If the search criterion is found more than once, the function returns the index of the first matching value. Only if Type = 0 can you search for regular expressions (if enabled in calculation options) or wildcards (if enabled in calculation options).

If Type = 1 or the third parameter is missing, the index of the last value that is smaller or equal to the search criterion is returned. For Type = -1, the index of the last value that is larger or equal is returned.

=MATCH(200; D1:D100) диапазони D1:D100 ҷустуҷӯ мекунад, ки бо сутуни D низомнок карда шудааст, барои арзиши 200. Вақте, ки арзиш пайдо шуд, рақами сатре кӣ дар он ёфт шуд баргардонида мешавад.

OFFSET

Арзиши чашмаки аз ҳавола дар масофаи якчанд сатр ва сутун дуртар ҷойгир аст, бармегардонад.

OFFSET(Reference; Rows; Columns [; Height [; Width]])

Reference чашмакест, ки аз он функтсия ҳаволаи навро ҷустуҷӯ мекунад.

Rows Шумораи чашмакҳо, ки нисбати онҳо ҳавола дуруст карда шуд.

Rows Шумораи чашмакҳо, ки нисбати онҳо ҳавола дуруст карда шуд.

Height(ихтиёрӣ) Баландии амудии диапазон, ки аз нуқтаи ҳаволаи нав сар мешавад.

Width(ихтиёрӣ) Дарозии уфуқии диапазон, ки аз нуқтаи ҳаволаи нав сар мешавад.

Arguments Rows and Columns must not lead to zero or negative start row or column.

Arguments Height and Width must not lead to zero or negative count of rows or columns.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

=OFFSET(A1; 2; 2) арзиши чашмаки C3 дорад (A1 ду сатр ва ду сутун кӯчонида шудааст). Агар C3 арзиши 100 дошта бошад онгоҳ функтсия 100 бармегардонад.

=OFFSET(B2:C3;1;1) returns a reference to B2:C3 moved down by 1 row and one column to the right (C3:D4).

=OFFSET(B2:C3;-1;-1) returns a reference to B2:C3 moved up by 1 row and one column to the left (A1:B2).

=OFFSET(B2:C3;0;0;3;4) returns a reference to B2:C3 resized to 3 rows and 4 columns (B2:E4).

=OFFSET(B2:C3;1;0;3;4) returns a reference to B2:C3 moved down by one row resized to 3 rows and 4 columns (B3:E5).

=SUM(OFFSET(A1; 2; 2; 5; 6)) суммаи диапазоне, ки аз чашмаки C3 сар мешавад ва баландии 5 сатр ва 6 сутун дорад меёбад (диапазон=C3:H7).

ROW

Returns the row number of a cell reference. If the reference is a cell, it returns the row number of the cell. If the reference is a cell range, it returns the corresponding row numbers in a one-column Array if the formula is entered as an array formula. If the ROW function with a range reference is not used in an array formula, only the row number of the first range cell will be returned.

ROW([Reference])

Referenceчашмак, диапазон, номи диапазон.

Агар шумо параметр дохил накунед рақами сатри формуладошта гирифта мешавад. LibreOffice Calc автомати ҳаволаро ба чашмаки ҷорӣ мегузорад.

=ROW(B3) натиҷа 3.

{=ROW(D5:D8)} натиҷа массиви яксутунаи (5, 6, 7, 8).

=ROW(D5:D8) натиҷа 5.

{=ROW(A1:E1)} ва =ROW(A1:E1) натиҷа 1.

=ROW() натиҷа 3 агар формула дар сатри 3 бошад.

{=ROW(Rabbit)} натиҷа массиви яксатра (1, 2, 3) агар "Rabbit" номи диапазони (C1:D3) бошад.

ROWS

Рақами сатрҳоро дар ҳавола ё массив медиҳад.

ROWS(Array)

array ҳавола ба массиви номдор, ки шумораи сатрҳояш ҳисоб карда мешаванд.

=Rows(B5) натиҷа 1 барои он, ки чашмак як сатр дорад.

=ROWS(A10:B12) натиҷа 3.

=ROWS(Rabbit) натиҷа 3 агар "Rabbit" номи диапазон бошад (C1:D3).

VLOOKUP

Vertical search with reference to adjacent cells to the right. This function checks if a specific value is contained in the first column of an array. The function then returns the value in the same row of the column named by Index. If the Sorted parameter is omitted or set to TRUE or one, it is assumed that the data is sorted in ascending order. In this case, if the exact Lookup is not found, the last value that is smaller than the criterion will be returned. If Sorted is set to FALSE or zero, an exact match must be found, otherwise the error Error: Value Not Available will be the result. Thus with a value of zero the data does not need to be sorted in ascending order.

=VLOOKUP(Lookup; Array; Index [; SortedRangeLookup])

Lookup is the value of any type looked for in the first column of the array.

Array is the reference, which is to comprise at least as many columns as the number passed in Index argument.

index шумораи сутунҳои массив.

SortedRangeLookup is an optional parameter that indicates whether the first column in the array contains range boundaries instead of plain values. In this mode, the lookup returns the value in the row with first column having value equal to or less than Lookup. E.g., it could contain dates when some tax value had been changed, and so the values represent starting dates of a period when a specific tax value was effective. Thus, searching for a date that is absent in the first array column, but falls between some existing boundary dates, would give the lower of them, allowing to find out the data being effective to the searched date. Enter the Boolean value FALSE or zero if the first column is not a range boundary list. When this parameter is TRUE or not given, the first column in the array must be sorted in ascending order. Sorted columns can be searched much faster and the function always returns a value, even if the search value was not matched exactly, if it is greater than the lowest value of the sorted list. In unsorted lists, the search value must be matched exactly. Otherwise the function will return #N/A with message: Error: Value Not Available.

You want to enter the number of a dish on the menu in cell A1, and the name of the dish is to appear as text in the neighboring cell (B1) immediately. The Number to Name assignment is contained in the D1:E100 array. D1 contains 100, E1 contains the name Vegetable Soup, and so forth, for 100 menu items. The numbers in column D are sorted in ascending order; thus, the optional Sorted parameter is not necessary.

Ин формуларо дар B1 дохил кунед:

=VLOOKUP(A1;D1:E100;2)

Бо баробари дохилкунии адад дар A1 B1 матни мутаносибро нишон медиҳад. Дохилкунии рақами набуда бо матни рақами ба он наздик иваз карда мешавад. Барои бартарафкунии ин, ҚАЛБАКӢро чун параметри охирони формуда дохил кунед.

ВАРАҚ

Returns the sheet number of either a reference or a string representing a sheet name. If you do not enter any parameters, the result is the sheet number of the spreadsheet containing the formula.

SHEET([Reference])

Referenceихтиёрӣ, ҳавола ба чашмак, диапазон ё сатри номи варақ.

=SHEET(Sheet2.A1) returns 2 if Sheet2 is the second sheet in the spreadsheet document.

=SHEET("Sheet3") returns 3 if Sheet3 is the third sheet in the spreadsheet document.

ВАРАҚ

Шумораи варақҳои ҳаволаро муайян мекунад. Агар ягон параметр дохил накунед, онгоҳ шумораи варақҳои ҳуҷҷатро медиҳад.

SHEETS([Reference])

Reference ҳавола ба варақ ё қитъа. Ихтиёрӣ.

=SHEETS(Sheet1.A1:Sheet3.G12) натиҷа 3 агар Sheet1, Sheet2, ва Sheet3 дар пайдарпаи вуҷуд дошта бошанд.