# Array Functions

Kuni fuuli diru assiishshubba amadino.

## Diru maati?

Diru yaa isipiridishittete amaddino hornyuwa aanaxaaddino bisiccote hakka geeshshaati. 3 hawiittimmooti nna 3 caccafootihu Shooli midaadu hakka geeshshi 3 x 3 diraati:

 A B C 7 31 33 95 17 2 5 10 50

Shiinqiidi dandaamanno diri 1 x 2 woy 2 x 1 lame xaaddanno bisiccuwa diraati.

## Diru afirimali maati?

Mitte mittente hornyuwa keenantino bisicco hakka geshshira keenaminoha diru afirimalaati yinanni. Diru afirimalinna wolootu afirimali mereero noo badooshshi diru afirimali batinye hornyuwa shiqishanno.

Diru afirimali di batinye hornyuwa calla amadanno, batinye hornyuwano qolanno. Diru afirimali gumma diraho.

To multiply the values in the individual cells by 10 in the above array, you do not need to apply a formula to each individual cell or value. Instead you just need to use a single array formula. Select a range of 3 x 3 cells on another part of the spreadsheet, enter the formula =10*A1:C3 and confirm this entry using the key combination + Shift + Enter. The result is a 3 x 3 array in which the individual values in the cell range (A1:C3) are multiplied by a factor of 10.

Batishshu ledishshi giddo, qolteno maqishshu hakka geeshshi aana wole loosaasine (diraho)horoonsira dandaatto. Konni LibreOffice Calc, Leda (+), Xeisa (-), Batisa (*), beeha (/), wolquwa (^), xaadisaancho (&) nna heewishshuwa (=, <>, <, >, <=, >=). Loosiisaano mittu mittunku hornyi aana bisiccote hakka geeshshi giddo horo aa dandiitanno nnadiru afirimali einoha ikkiro guma diru gede qolanno.

Heewishshu loosaasinediru afirimali giddo mullicho bisiccuwarosamino afirimali gede irkisanno, hakkuno, zeerote woy mulla naanni fikiimi gede. Lawishshaho, Bisiccuwa A1 nna A2 mulla diru afirimala ikkiro, {=A1:A2=""} nna {=A1:A2=0} lamenka 1 caccafo 2 hawiittimma diri bisiccuwa TRUE amadino.

### Diru afirimala mamoote horoonsiratto?

Addi addi hornyuwa horoonsidhe shallagubba marro qolattoha ikkiro diru afirimala horoonsiri. Gedenoonni shallagote gara soorrate hasiroittoro, diru afirimala calla yanneessa noohe. Diru afirimala ledate, giddo diri hakka geeshsha doorte nna aanchite shiqqino soorro diru afirimalira xaadisi.

Diru afirimali wolenobatinye hornyuwa shallagamatesuqate doorsha fooqisanno, korkaatuno qaagishshu hala'linyi noonsakkihuraati. Ledoteno, dirubba xurqa shallago harisate qara uduunnichooti, korkaatuno shallagokki giddo batinye bisiccote hakka geeshshuwa afira dandaatto. LibreOffice diraho addi addi shallagote assiishshubba afirino, insano MMULT assiishsha lame dirra batisate woy SUMPRODUCT assiishsha lame dirraha bikkote gumma shallagate.

## LibreOffice Calc giddo diru afirimalubba horoonsira

### Implicit intersection of array formulas

You can also create a "normal" formula in which the reference range, such as parameters, indicate an array formula. This formula is also known as "implicit intersection" of array formula. The result is obtained from the intersection of the reference range and the rows or columns in which the formula is found. If there is no intersection or if the range at the intersection covers several rows or columns, a #VALUE! error message appears. The following example illustrates this concept:

In the table above, place the array formula in D1:

{=A1:A3 + 100}

Cells D1, D2, D3 have values 107, 195, 105 respectively.

Insert the formula below in E2, do not enter as array formula.

=A1:A3 + 100

Cells E1 and E3 are empty, Cell E2 has value 195. This is the implicit intersection of array formulas.

Insert formula below in E4, as in E2.

=A1:A3 + 100

Cell E4 display #VALUE!. Row 4 is out of the range A1:A3 of the formula.

### Diru afirimalubba kalaqa

Konne Assiishshu Kaa'laanchohoroonsidhediru afirimala kalaqittoro, Diru duucha wote buuxooshshu saaxine malaatisa noohe ikkinohura gumma diru giddo qolantino. Ikkahoogiro, aliidi-gurayiidi bisicco diraho balaxxe shallagantino hornyo calla qolantanno.

If you enter the array formula directly into the cell, you must use the key combination Shift + + Enter instead of the Enter key. Only then does the formula become an array formula.

Diru afirimalubba LibreOffice Calc giddo cufe amadaanno uduunnichi giddo shiqanno. Diru afirimalubba angate uduunnicho eatenni kalaqa didandaatto.

The cells in a results array are automatically protected against changes. However, you can edit, delete or copy the array formula by selecting the entire array cell range.

### Afirimalubbate giddo xuruuru giddo soorrantannokki dira horoonsira

Calc supports inline matrix/array constants in formulas. An inline array is surrounded by curly braces '{' and '}'. Elements can be each a number (including negatives), a logical constant (TRUE, FALSE), or a literal string. Non-constant expressions are not allowed. Arrays can be entered with one or more rows, and one or more columns. All rows must consist of the same number of elements, all columns must consist of the same number of elements.

Caccafote badaanchi (mitte haawiittimma giddo miilla badanno) nna hawiittimmate badaanchi afuunna giddo irkiraanchooti. Kayiinni tenne irkote amadora, ';' ledote malaati nna '|' banbu malaatta caccafotenna haawiittimmate malaatta badaancho garunni leellishate kaa'lanno. Lawishshaho, ingilizete affi giddo, ',' taxxeessu malaati caccafote badaanchi gede kaa'lanno, wolu garinni ';' ledote malaati hawiittimmate badaanchi gede kaa'lanno.

You can view and change the row and column separator in - Calc - Formula - Separators.

Dirra buuwa didandiitanno.

Lawishshuwa:

={1;2;3}

Mitte haawiittimma diri sase kiirra 1, 2, nna 3 amadanno.

To enter this array constant, you select three cells in a row, then you type the formula ={1;2;3} using the curly braces and the semicolons, then press + Shift + Enter.

={1;2;3|4;5;6}

Mitte mittente haawiittimmara lame haawiittimmootanna sase hornyuwa dira.

={0;1;2|FALSE;TRUE;"lame"}

Karsamino daati dira.

=SIN({1;2;3})

Kiirote diri afirimali gede eino, guma sase SIN shallagubba tidho ledo 1, 2, nna 3 shiqishanno.

### Diru afirimalubba muccisa

1. Select the cell range or array containing the array formula. To select the whole array, position the cell cursor inside the array range, then press + /, where / is the division key on the numeric keypad.

2. Either press F2 or position the cursor in the input line. Both of these actions let you edit the formula.

3. After you have made changes, press + Shift + Enter.

Dirunnita babbaxxitino bissa suudisa dandaatto. Lawishshaho, Borangichu kuula soorra dandaatto. Bisiccote hakka geeshsha dooranna aantete hasiroottoha soorri.

### Deleting Array Formulae

1. Select the cell range or array containing the array formula. To select the whole array, position the cell cursor inside the array range, then press + /, where / is the division key on the numeric keypad.

2. Press Delete to delete the array contents, including the array formula, or press Backspace and this brings up the Delete Contents dialog box. Select Formula or Delete All and click OK.

### Diru afirimalubba hinkiila

1. Diru afirimala amaddino bisiccote hakka geeshsha woy dira doori.

2. Either press F2 or position the cursor in the input line.

3. Copy the formula into the input line by pressing + C.

4. Select a range of cells where you want to insert the array formula and either press F2 or position the cursor in the input line.

5. Paste the formula by pressing + V in the selected space and confirm it by pressing + Shift + Enter. The selected range now contains the array formula.

### Diru Hakka geeshsha Taashsha

Gumu dira muccisate hasirittoro, aanannoha loosi:

1. Diru afirimala amaddino bisiccote hakka geeshsha woy dira doori.

2. Doorshu woroonni, qiniiteenni, hakka geeshshu aana ajokkinni du'misa woy ajisha dandaattota shiima bido la"atto.

Diru hakka geeshsha taashshatto wote, diru afirimali umi loosaanchinni taala dinosi. Mayi giddono hakka geeshsha soorrattohu gumu shiqiro callaati.

By holding down the key, you can create a copy of the array formula in the given range.

### Ikkitote Diri Shallagubba

Ikkitote diri shallago dira woy kiirote dirto afirimala ikkite IF() woy CHOOSE() assiishsha ledora amaddino. Afirimalu giddo ikkitote tidho maqishshu qarqaraati woy kiirote dirto gumaati.

Aananno lawishshi giddo, >0 wo'naalshu {=IF(A1:A3>0;"ee";"dee'ni")} afirimali A1:A3 hakka geeshshu giddo mitte mittente bisicco loosiisanno nna Gumu fiixoontanno bisiccora hinkiilamanno.

 A B (afirimala) B (guma) 1 {=IF(A1:A3>0;"ee";"dee'ni")} ee 0 {=IF(A1:A3>0;"ee";"dee'ni")} dee'ni 1 {=IF(A1:A3>0;"ee";"dee'ni")} ee

Aantanno assiishshubba wolqate diri amadamme shiqishshanno: CORREL, COVAR, FORECAST, FTEST, INTERCEPT, MDETERM, MINVERSE, MMULT, MODE, PEARSON, PROB, RSQ, SLOPE, STEYX, SUMPRODUCT, SUMX2MY2, SUMX2PY2, SUMXMY2, TTEST. Assiishshubbate giddonni mitto woshshatto yannara qarqaru maqishshuwa tidhuwate gede horoonsirittoro, assiishshubba diru assiishshubba gede riqiwantanno. Aantanno shae wolqate diri amadamme lawishsha uyitanno:

 A B (afirimala) B (guma) C (wolqate diri afirimala) C (guma) 1 =A1:A2+1 2 =SUMPRODUCT(A1:A2+1) 5 2 =A1:A2+1 3 =SUMPRODUCT(A1:A2+1) 5 =A1:A2+1 #VALUE! =SUMPRODUCT(A1:A2+1) 5

## FREQUENCY

Indicates the frequency distribution in a one-column-array. The function counts the number of values in the Data array that are within the values given by the Classes array.

#### Syntax

FREQUENCY(Daata; Kifilla)

daatu Hornyuwa kirama noonsa maqishsha riqiwanno.

Gaamubba boode hornyuwa dira riqibbanno.

This function ignores any text or empty cell within a data range. If you suspect wrong results from this function, look for text in the data ranges. To highlight text contents in a data range, use the value highlighting feature.

Konni qooli sammoraDiru assiishshubbara xaphooma eo hasa dandaatto.

#### Example

Aantanno shae giddo, Caccafo A aantiweelo bikko hornyuwa diritanno. Caccafo B gaamubba daatu A giddo beehate hasiroottoha eattora aliidi gumulo amaddino. B1 giddo eino gumulo garinni, FREQUENCY assiishshi bikkote hornyuwa 5 ajjanno woy taaltanno kiiro qolanno. B2 gumulo garinni 10, FREQUENCY assiishshi layiinki guma bikkote hornyuwa 5 roortannota nna 10ajjanno woy taaltanno. B6 giddo eootto borro, ">25", maqishshu loosira calla ikkitanno.

 A B C 12 5 1 8 10 3 24 15 2 11 20 3 5 25 1 20 >25 1 16 9 7 16 33

Gaamote gumulo garinnimarro higate eo giddo tircho caccafo hakka geeshsha dooranno. Gaamote heerichonni rooremitte bare doora noohe. Konni lawishshi giddo, C1:C6 hakka geeshsha doori. FREQUENCY assiishsha Assiishshu Kaa'lanchogiddo ale qolte woshshi. Daata (A1:A11)hakka geeshshi giddo doori, nna aanchite kifilla (B1:B6)gumulo eootto hakka geeshsha gaami. Dira buuxote saaxine doori nna Ishshiqiphisi. C1:C6 hakka geeshshi giddo marro higate kiiro la"atto.

More explanations on top of this page.

## GROWTH

Diru giddo wolqate rosichi bixxiluwa shallaganno.

#### Syntax

GROWTH(DataY [; [ DataX ] [; [ NewDataX ] [; FunctionType ] ] ])

DaataY Y daati dira riqiwanno.

DaataX (doorsha) X daati dira riqiwanno.

harooDaataX (doorsha) hornyuwa wirro higge shallagantannoha X daati dira riqiwanno.

FunctionType (optional). If FunctionType = 0, functions in the form y = m^x will be calculated. Otherwise, y = b*m^x functions will be calculated.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

#### Example

This function returns an array and is handled in the same way as the other array functions. Select a range where you want the answers to appear and select the function. Select DataY. Enter any other parameters, mark Array and click OK.

## LINEST

Suwashshu xuruurira danchu garinnidaatu qinoo xaadannoha shaete isitasitikise qolanno.

#### Syntax

LINEST(data_Y [; data_X [; linearType [; stats]]])

daata_Y tircho hawiittimma woy caccafo hakka geeshsha ikkite daatu gambooshshi bixxilluwara y xaaddimmota badanno.

daatu_X fiixoontino tircho haawiittimma woy caccafo hakka geeshshi x xaaddimmo badanno. daatu_X ikkiro 1, 2, 3, ..., ngadubba hawinno. Mittu gambooshshi aliidi soorramaano heedhuro daatu_X miteekkite hakkageeshshi batinye hawiittimmoota woy caccafooti ledooti.

LINEST susing linear regressionuwashsho xuruura hasanno y = a + bx daatu garunni xaadate, noowa qolate hojja horoonsidh("shiimiidi shooli midaadda" gara). Mittu aliidi gambooshshi soorramaano suwashshu xuruuriy = a + b1x1 + b2x2 ... + bnxnsuudinni heeranno.

If linearType is FALSE the straight line found is forced to pass through the origin (the constant a is zero; y = bx). If omitted, linearType defaults to TRUE (the line is not forced through the origin).

If stats is omitted or FALSE only the top line of the statistics table is returned. If TRUE the entire table is returned.

LINEST returns a table (array) of statistics as below and must be entered as an array formula (for example by using + Shift + Return rather than just Return).

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

#### Example

Kuni assiishshidira qolanno nnawolu diri gede assiishshi amadamanno. Dawarubbate hakkageeshsha nna assiishsha dooranno. daatu_Ydooranno. Hasirittoro, wole eishshubba ea dandaatto. Dira doori nna Ishshiqiphisi.

Gumma amuraatunni higgino(isitasittikise = 0), ajanna darga higino xuruuri baganna isiha y mudukki xaadooshshe leellishanno. isitasittikise 0 ditaalanno, wole gumma leella noonsa.

### Wole LINEST Gumma:

Aantanno lawishshuwa wo.naali:

 A B C D E F x1 x2 y Eva 4 7 100 4,17 -3,48 82,33 5 9 105 5,46 10,96 9,35 6 11 104 0,87 5,06 #NA 7 12 108 13,21 4 #NA 8 15 111 675,45 102,26 #NA 9 17 120 10 19 133

Caccafo A duucha X1 hornyuwa amaddanno, Caccafo B duucha X2 hornyuwa nna Caccafo C Y hornyuwa amaddanno. Hakkuri hornyuwa isipiridishittekki giddo balaxxe eootto. Xa E2:G6 isipiridishittete giddo qineessa nna Assiishshu Kaa'laanchibaqisamino. LINEST loosu assiishshira, Dira buuxote saaxineAsiishshu Kaa'laanchomalaatisa noohe. Aantete, isipiridishittete giddo aantanno hornyuwa (woy qulfeborde horoonsidhe insa ei)doori:

daata_Y C2:C8 ho

daata_X A2:B8 ho

hojjateDana nna isitasitikise lamunku gambooshshi 1.

Ishiqiphisitto gedeenni, LibreOffice Calcaliidi lawishsha LINEST lawishshu giddo leellinshoonnigede wonshanno.

The formula in the Formula bar corresponds to each cell of the LINEST array {=LINEST(C2:C8;A2:B8;1;1)}.

Kuni shallagamino LINEST hornyuwa riqiwanno:

E2 nna F2: Baga m darga agurino xuruuri y=b+m*x x1 nna x2 hornyuwara. Hornyuwa galchammete aantenni aamantino; hakkuno, x2 baga E2 giddo nna x1 baga F2 giddo.

G2: b y mudukki ledo xaadooshshe.

E3 nna F3: Bagate so'rora margeessu hornyooti.

G3: Gufisate margeessi so'rooti

E4: RSQ

F4: Y hornyora darga agurtino shallagamme margeessu so'rooti.

E5: Soorrote tittirshiwi F hornyooti.

F5: soorrote tittirshiwi keeraanchimmate digirraati.

E6: hajjansa mereeriwiinni hedantino Y hornyuwa shoolimmatenni fulate ledoooti.

F6: Uyinoonni Y hornyuwa hedantino Y hornyo shoolimmatenni fulate ledoooti.

More explanations on top of this page.

## LOGEST

Kuni assiishshi eino daata taashshate darga agurtino wolqate gombo gede (y=b*m^x)shallaganno.

#### Syntax

LOGEST(DataY [; DataX [; FunctionType [; Stats]]])

DaataY Y daati dira riqiwanno.

DaataX (doorsha) X daati dira riqiwanno.

assiishshuDana (doorshaho). Assiishshu_Dani = 0 ikkiro, assiishshu y = m^x suudi shallagama noosi. Ikka hoogiro, y = b*m^x assiishshubba shallagama noonsa.

Isitasitikise (doorshaho). Isitasitikise=0 ikkiro, darga agurtino hanqafaano calla shallagantino.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

#### Example

LINEST lai. Ikkirono, higgannoti shooli midaadu ledo dino.

## MDETERM

Diraho diru gumulaano qolanno. Kuni assiishshi muli bisicco giddo hornyo qolanno; Gummate hakka geeshsha tira dihasiissanno.

#### Syntax

MDETERM(Dira)

Diru gumulaano tirantinoha shooli midaadu dira riqiwanno.

You can find a general introduction to using Array functions on top of this page.

More explanations on top of this page.

## MINVERSE

Galchamme dira qolanno.

#### Syntax

MINVERSE(Dira)

Diru galchama noosiha shooli midaadu dira riqiwanno.

More explanations on top of this page.

#### Example

Shooli midaadu hakka geeshsha doori nna MINVERSE doori. Gumu dira doori, Dira bare doori nna Ishshiqiphisi.

## MMULT

Lame dirrata diru guma shallaganno. Dira 1 caccafubba kiiro hawiittimmooti 2 dirra kiiro ledo fiixooma noosi. Shooli midaadu diri taalo kiiro hawiittimmootanna caccafoota afirino.

#### Syntax

MMULT(Array 1; Array 2)

Array 1 represents the first array used in the array product.

Array 2 represents the second array with the same number of rows.

More explanations on top of this page.

#### Example

Select a square range. Choose the MMULT function. Select Array 1, then select Array 2. Using the Function Wizard, mark the Array check box. Click OK. The output array will appear in the first selected range.

## MUNIT

Boode bikkaha mittimmate shooli midaadu dira qolanno. Mittimmate shooli midaadu dira qara magadamme miilla dargi 1 nna baala wole miilla diri 0 ledo taaloho.

#### Syntax

MUNIT(Seendillubba)

Seendillubba diru bikko geeshsha kultanno.

Konni qooli sammoraDiru assiishshubbara xaphooma eo hasa dandaatto.

#### Example

Isipiridishittete giddo shoolimidaadu hakka geeshsha doori, lawishshaho, A1 kayise E5 geeshsha.

Hakkageeshshu dooramme huna nookkiha, MUNIT assiishsha doori. Dira buuxote saaxine malaatisi. Hasi'noonni seendilluwa diru bikkora eate, 5konni korkaatinni, nna ishshiqiphisi.

You can also enter the =MUNIT(5) formula in the last cell of the selected range (E5), and press .

Xa hakkageeshshu A1:E5 ledo mitto dira la"atto.

More explanations on top of this page.

## SUMPRODUCT

uyinoonni dirra giddo fiixoontino miilla batisanno, nna hakurigumma ledo qolanno.

#### Syntax

SUMPRODUCT(Array 1[; Array 2;][...;[Array 255]])

Array 1[; Array 2;][...;[Array 255]] represent arrays whose corresponding elements are to be multiplied.

At least one array must be part of the argument list. If only one array is given, all array elements are summed. If more than one array is given, they must all be the same size.

#### Example

 A B C D 2 3 4 5 6 7 8 9 10 11 12 13

=Ledoteguma(A1:B3;C1:D3) 397 qolanno.

Shallago: A1*C1 + B1*D1 + A2*C2 + B2*D2 + A3*C3 + B3*D3

SUMPRODUCT Lamu sayisaanchi bikkote guma shallagate horoonsira dandaatto.

SUMPRODUCT tircho kiiro qolanno, asiishshi diru assiishshi gede ea dihasiissanno.

More explanations on top of this page.

## SUMX2MY2

Lame dirra giddo fiixoontino hornyuwatababbaxitino shooli midaadda ledo qolanno.

#### Syntax

SUMX2MY2(ArrayX; ArrayY)

DiraX miillansa shoole ikkitanno nna ledantannota umi dira riqibbanno.

DiraY miillansa shoole ikkitanno nna xe'annota layinki dira riqibbanno.

More explanations on top of this page.

## SUMX2PY2

Lame dirra giddo fiixoontino hornyuwata shooli midaadda ledote ledo qolanno.

#### Syntax

LedoX2PY2(ArrayX; ArrayY)

DiraX miillansa shoole ikkitanno nna ledantannota umi dira riqibbanno.

DiraY miillansa shoole ikkitanno nna xe'annota layinki dira riqibbanno.

More explanations on top of this page.

## SUMXMY2

Lame dirra giddo fiixoontino hornyuwata shooli midaadda mereero ledanno.

#### Syntax

SUMXMY2(ArrayX; ArrayY)

DiraY miillansa shoole ikkitanno nna xe'annota umi dira riqibbanno.

DiraY miillansa shoole ikkitanno nna xe'annota layinki dira riqibbanno.

More explanations on top of this page.

## TRANSPOSE

Diraho hawiittimmootunna caccafootu darga soorranno.

#### Syntax

TRANSPOSE(Dira)

Diru isipiridishittete giddo dira ikke darga soorrama noosiha riqiwanno.

Konni qooli sammora Diru assiishshubbara horoonsidhe xaphooma eo hasa dandaatto.

#### Example

In the spreadsheet, select the range in which the transposed array can appear. If the original array has n rows and m columns, your selected range must have at least m rows and n columns. Then enter the formula directly, select the original array and press . Or, if you are using the Function Wizard, mark the Array check box. The transposed array appears in the selected target range and is protected automatically against changes.

 A B C D 2 3 4 5 6 7 8 9

The above table is 2 rows, 4 columns. In order to transpose it, you must select 4 rows, 2 columns. Assuming you want to transpose the above table to the range A7:B10 (4 rows, 2 columns) you must select the entire range and then enter the following:

TRANSPOSE(A1:D2)

Then make sure to enter it as matrix formula with . The result will be as follows:

 A B 2 6 3 7 4 8 5 9

## TREND

Hornyuwa hojjate rosichi aleenni qolanno.

#### Syntax

TREND(DataY [; DataX [; NewDataX [; LinearType]]])

DaataY Y daati dira riqiwanno.

DaataX (doorsha) X daati dira riqiwanno.

harooDaataX (doorsha) X daati dira riqiwanno., insano hornyuwa wirro qole shallagate kaa'litanno.

LinearType (optional). If LinearType = 0, then lines will be calculated through the zero point. Otherwise, offset lines will also be calculated. The default is LinearType <> 0.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

#### Example

Select a spreadsheet range in which the trend data will appear. Select the function. Enter the output data or select it with the mouse. Mark the Array field, click OK. The trend data calculated from the output data is displayed.

Please support us!