Navigator

Shows or hides the Navigator window, where you can quickly jump to different parts of your document.

Use the Navigator to insert elements from the current document or other open documents, and to organize master documents.

To edit an item in the Navigator, right-click the item, and then choose a command from the context menu.

You can dock the Navigator at the edge of your workspace.

To move the Navigator, drag its title bar.

To dock the Navigator, drag its title bar to the left, right or bottom edge of the workspace. To undock the Navigator, hold down the key and double-click on a grey area of the Navigator.

Click the expander icon (+) next to a category in the Navigator to view the items in the category. Click on an expanded category to collapse it.

To view the number of items in a category, rest your mouse pointer over the category in the Navigator.

To jump to an item in the document, double-click the item in the Navigator.

To jump to the next or previous item in a document, use the Navigate by box to select the item category, and then click the up or down arrows.

The navigator shows the correspondence between the current document cursor location element and the navigator view, according to different categories: Headings, Tables, Hyperlinks and more. The element is displayed and highlighted in the Navigator content view. If the element is located in a collapsed layer, the required layers above it are automatically expanded and remain expanded afterwards.

Document elements are highlighted by inverting their colour on displayed page when hovering their entry name in the Navigator. This allows to draw attention to the element hovered in the Navigator.

Navigate By

Use selection box to choose which type of item should be navigated, when using the Previous and Next buttons.

이전

Jumps to the previous item in the document. To specify the type of item to jump to, click the Navigate By list, and then click an item category - for example, "Images".

다음

Jumps to the next item in the document. To specify the type of item to jump to, click the Navigate By list, and then click an item category - for example, "Images".

쪽 번호

Type the number of the page that you want to jump to, and then press Enter. Use the spin buttons to navigate.

Content Navigation View

Switches between the display of all categories in the Navigator and the selected category.

Context menus use a selection of commands found on this help page. The commands in a context menu change, depending on which category or item is selected.

Toggle Master View

마스터 문서가 열려 있으면 마스터 보기와 기본 보기 사이를 전환합니다.

머리글

Moves the cursor to the header, or from the header to the document text area.

바닥글

Moves the cursor to the footer, or from the footer to the document text area.

고정 <-> 텍스트

Jumps between the footnote text and the footnote anchor.

센티넬 설정

현재 커서 위치에서 미리 알림을 설정하려면 여기를 클릭합니다. 미리 알림은 5개까지 정의할 수 있습니다. 미리 알림으로 이동하려면 탐색 아이콘을 클릭하고 탐색 창에서 미리 알림 아이콘을 누른 다음 이전 또는 다음 버튼을 클릭합니다.

Show Up to Outline Level

Click the icon at the top of Navigator or right-click a heading in the Navigator window, then choose how many levels of headings to show in the Headings section of the Navigator window.

For example, choose 1 to only show headings with outline level 1. Choose 3 to show headings up to outline level 3; choose 10 to show all headings.

List Box

Shows or hides the Navigator list.

Promote Outline Level

Increases the outline level of the selected heading, and the headings that occur below the heading, by one. To only increase the outline level of the selected heading, hold down , and then click this icon.

Demote Outline Level

Decreases the outline level of the selected heading, and the headings that occur below the heading, by one. To only decrease the outline level of the selected heading, hold down , and then click this icon.

Move Heading Up

Moves the selected heading, and the text below the heading, up one heading position in the Navigator and in the document. To move only the selected heading and not the text associated with the heading, hold down , and then click this icon.

Move Heading Down

Moves the selected heading, and the text below the heading, down one heading position in the Navigator and in the document. To move only the selected heading and not the text associated with the heading, hold down , and then click this icon.

Drag Mode

Sets the drag and drop options for inserting items from the Navigator into a document, for example, as a hyperlink. Click this icon, and then choose the option that you want to use.

Insert As Hyperlink

항목을 현재 문서로 끌어다 놓으면 하이퍼링크를 만듭니다. 하이퍼링크에서 가리키는 항목으로 이동하려면 문서에서 하이퍼링크를 클릭합니다.

Insert As Link

선택한 항목을 현재 문서에서 끌어다 놓을 수 있는 링크로 삽입합니다. 텍스트는 보호되는 구역으로 삽입됩니다. 원본이 변경되면 링크 내용이 자동으로 업데이트됩니다. 문서에서 수동으로 링크를 업데이트하려면 도구 - 업데이트 - 링크를 선택합니다. 그림, OLE 개체, 참조 및 색인에 대해서는 링크를 만들 수 없습니다.

Insert As Copy

현재 문서에서 끌어다 놓을 수 있는 선택한 항목의 복사본을 삽입합니다. 그림, OLE 개체, 참조 및 색인의 복사본은 끌어다 놓을 수 없습니다.

Open Documents

모든 열려 있는 텍스트 문서의 이름을 나열합니다. 내비게이터 창에서 문서 내용을 표시하려면 목록에서 문서 이름을 선택합니다. 내비게이터에서 표시하는 현재 문서는 목록의 이름 뒤에 "활성 중"이라는 단어로 표시됩니다.

Outline Tracking

Set Navigator’s mode of outline tracking. This feature applies only to outline entries under Headings in the Content View frame of Navigator. To see, enable, or change the mode, right-click on Headings or an item under Headings and choose Outline Tracking. The selected mode is applied to the entire document.

In Default and Focus mode, Navigator will automatically select the nearest heading before the current cursor position in the document.

In Default mode, the display of outline entries in Navigator is never changed, only an outline entry is selected.

In Focus mode, Navigator shows only the headings for the selected outline level, relative to the next higher outline level. For example, if a level 2 heading is selected, then all level 2 headings under the same level 1 heading are shown, while any level 3-10 headings (under the same level 1 heading) are collapsed. Other headings, not under the same level 1 heading, are also collapsed.

Choose Off to disable Outline Tracking.

Copy

Copies the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the copied heading. You can paste the contents in another place in the document.

Delete Heading

Deletes the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the deleted heading.

Select

Selects the heading and the contents that follow the heading until the next heading with the same outline level. These contents include paragraphs with outline level “None” and headings with an outline level greater than the selected heading.

Display

Select the document that you want to view.

Edit

Edit the properties of the selected object.

Rename

Renames the selected object. At object creation time, LibreOffice assigns a unique name to the object within the document.

Delete Table

Deletes the selected table.

Table Tracking

Mark this checkbox to include tables when tracking changes.

Delete Frame

Deletes the frame and all its contents.

Frame Tracking

Mark this checkbox to include frames when tracking changes.

Section Tracking

Mark this checkbox to include sections when tracking changes.

Delete Image

Deletes the image.

Image Tracking

Mark this checkbox to include images when tracking changes.

Delete OLE Object

Deletes the OLE object.

OLE Object Tracking

Mark this checkbox to include OLE objects when tracking changes.

Delete Bookmark

Deletes the bookmark.

Bookmark Tracking

Mark this checkbox to include bookmarks when tracking changes.

Delete Hyperlink

Deletes the hyperlink.

Hyperlink Tracking

Mark this checkbox to include hyperlinks when tracking changes.

Delete Reference

Deletes the reference.

Reference Tracking

Mark this checkbox to include references when tracking changes.

Update

Updates the index.

Remove

Removes the index. The contents of the index is not deleted but is not treated as an index anymore.

Read only

Check this box to prevent manual editing of the index content.

Delete Index

Deletes the index.

Index Tracking

Mark this checkbox to include indexes when tracking changes.

Delete Comment

Deletes the comment.

Comment Tracking

Mark this checkbox to include comments when tracking changes.

Delete Drawing Object

Deletes the drawing object.

Drawing Object Tracking

Mark this checkbox to include drawing objects when tracking changes.

Delete Field

Deletes the field.

Field Tracking

Mark this checkbox to include fields when tracking changes.

Delete Footnote

Deletes the footnote.

Footnote Tracking

Mark this checkbox to include footnotes when tracking changes.

Delete Endnote

Deletes the endnote.

Endnote Tracking

Mark this checkbox to include endnotes when tracking changes.

Sort Alphabetically

Sorts alphabetically all entries in the selected category. Uncheck this option to sort entries according the their order of appearance in the document.

Expand or Collapse All Categories

Expands or collapse the display of objects under the selected category. Document objects names are displayed under the category entry. Click on an entry to jump to the object in the document.

Go to

Jumps to the selected object in the document.