Nota breytur

The following describes the basic use of variables in LibreOffice Basic.

Naming Conventions for Variable Identifiers

A variable name can consist of a maximum of 255 characters. The first character of a variable name must be a letter A-Z or a-z. Numbers can also be used in a variable name, but punctuation symbols and special characters are not permitted, with exception of the underscore character ("_"). In LibreOffice Basic variable identifiers are not case-sensitive. Variable names may contain spaces but must be enclosed in square brackets if they do.

Examples for variable identifiers:


    MyNumber=5      'Correct'
    MyNumber5=15    'Correct'
    MyNumber_5=20   'Correct'
    My Number=20    'Not valid, variable with space must be enclosed in square brackets'
    [My Number]=12  'Correct'
    DĂ©jĂ Vu=25       'Not valid, special characters are not allowed'
    5MyNumber=12    'Not valid, variable may not begin with a number'
    Number,Mine=12  'Not valid, punctuation marks are not allowed'

Declaring Variables

In LibreOffice Basic you don't need to declare variables explicitly. A variable declaration can be performed with the Dim statement. You can declare more than one variable at a time by separating the names with a comma. To define the variable type, use either a type-declaration sign after the name, or the appropriate key word.

Examples for variable declarations:


    Dim a$               'Declares the variable "a" as a String'
    Dim a As String      'Declares the variable "a" as a String'
    Dim a$, b As Integer 'Declares one variable as a String and one as an Integer'
    Dim c As Boolean     'Declares c as a Boolean variable that can be TRUE or FALSE'
warning

Once you have declared a variable as a certain type, you cannot declare the variable under the same name again as a different type!


When you declare multiple variables in a single line of code you need to specify the type of each variable. If the type of a variable is not explicitly specified, then Basic will assume that the variable is of the Variant type.


  ' Both variables "a" and "b" are of the Integer type
  Dim a As Integer, b As Integer
  ' Variable "c" is a Variant and "d" is an Integer
  Dim c, d As Integer
  ' A variable can also be explicitly declared as a Variant
  Dim e As Variant, f As Double
note

The Variant type is a special data type that can store any kind of value. To learn more, refer to the section The Variant type below.


Forcing Variable Declarations

To force declaration of variables, use the following command:


Option Explicit

The Option Explicit statement has to be the first line in the module, before the first SUB. Generally, only arrays need to be declared explicitly. All other variables are declared according to the type-declaration character, or - if omitted - as the default type Single.

Variable Types

LibreOffice Basic supports four variable classes:

Heiltölur breytur

Integer variables range from -32768 to 32767. If you assign a floating-point value to an integer variable, the decimal places are rounded to the next integer. Integer variables are rapidly calculated in procedures and are suitable for counter variables in loops. An integer variable only requires two bytes of memory. "%" is the type-declaration character.


Dim Variable%
Dim Variable As Integer

Long Integer Variables

Long integer variables range from -2147483648 to 2147483647. If you assign a floating-point value to a long integer variable, the decimal places are rounded to the next integer. Long integer variables are rapidly calculated in procedures and are suitable for counter variables in loops for large values. A long integer variable requires four bytes of memory. "&" is the type-declaration character.


Dim Variable&
Dim Variable As Long

Decimal Variables

Decimal variables can take positive or negative numbers or zero. Accuracy is up to 29 digits.

You can use plus (+) or minus (-) signs as prefixes for decimal numbers (with or without spaces).

If a decimal number is assigned to an integer variable, LibreOffice Basic rounds the figure up or down.

Single Variables

Single variables can take positive or negative values ranging from 3.402823 x 10E38 to 1.401298 x 10E-45. Single variables are floating-point variables, in which the decimal precision decreases as the non-decimal part of the number increases. Single variables are suitable for mathematical calculations of average precision. Calculations require more time than for Integer variables, but are faster than calculations with Double variables. A Single variable requires 4 bytes of memory. The type-declaration character is "!".


Dim Variable!
Dim Variable As Single

Double Variables

Double variables can take positive or negative values ranging from 1.79769313486232 x 10E308 to 4.94065645841247 x 10E-324. Double variables are floating-point variables, in which the decimal precision decreases as the non-decimal part of the number increases. Double variables are suitable for precise calculations. Calculations require more time than for Single variables. A Double variable requires 8 bytes of memory. The type-declaration character is "#".


Dim Variable#
Dim Variable As Double

Currency Variables

Currency variables are internally stored as 64-bit numbers (8 Bytes) and displayed as a fixed-decimal number with 15 non-decimal and 4 decimal places. The values range from -922337203685477.5808 to +922337203685477.5807. Currency variables are used to calculate currency values with a high precision. The type-declaration character is "@".


Dim Variable@
Dim Variable As Currency

Literals for integers

Numbers can be encoded using octal and hexadecimal forms.


  xi = &o13 '    8 + 3
  ci = &h65 ' 6*16 + 5
  MAX_Integer =  &o77777 '  32767 = &h7FFF
  MIN_Integer = &o100000 ' -32768 = &h8000
  MAX_Long = &h7fffffff '  2147483647 = &o17777777777
  MIN_Long = &h80000000 ' -2147483648 = &o20000000000

String Variables

String variables can hold character strings with up to 2,147,483,648 characters. Each character is stored as the corresponding Unicode value. String variables are suitable for word processing within programs and for temporary storage of any non-printable character up to a maximum length of 2 Gbytes. The memory required for storing string variables depends on the number of characters in the variable. The type-declaration character is "$".

tip

In BASIC String functions, the first character of the string has index 1.



Dim Variable$
Dim Variable As String

Boolean Variables

Boolean variables store only one of two values: TRUE or FALSE. A number 0 evaluates to FALSE, every other value evaluates to TRUE.


Dim Variable As Boolean

Date Variables

Date variables can only contain dates and time values stored in an internal format. Values assigned to Date variables with Dateserial, Datevalue, Timeserial or Timevalue are automatically converted to the internal format. Date-variables are converted to normal numbers by using the Day, Month, Year or the Hour, Minute, Second function. The internal format enables a comparison of date/time values by calculating the difference between two numbers. These variables can only be declared with the key word Date.


Dim Variable As Date

Literals for Dates

Date literals allow to specify unambiguous date variables that are independent from the current language. Literals are enclosed between hash signs #. Possible formats are:


  start_date = #12/30/1899# ' = 1
  dob = #2010-09-28#

The Variant type

Variables declared as Variant can handle any data type. This means that the actual data type is defined during runtime as a value is assigned to the variable.

There are three main ways to create a Variant variable, as shown below:


  Dim varA            ' The type is not specified, hence the variable is a Variant
  Dim varB as Variant ' The variable is explicitly declared as a Variant
  varC = "abc"        ' Previously undeclared variables are treated as Variants

The example below uses the TypeName function to show how the type of a Variant variable changes upon assignment.


  Dim myVar As Variant
  MsgBox TypeName(myVar) ' Empty
  myVar = "Hello!"
  MsgBox TypeName(myVar) ' String
  myVar = 10
  MsgBox TypeName(myVar) ' Integer
note

A Variant variable is initialized with the Empty special data type. You can use the IsEmpty function to test if a variable is an Empty Variant.


You can also use the keyword Any to declare a variable as a Variant. However, Any is deprecated and is available for backward compatibility.

warning

Arguments with type Variant or Any passed in function calls are not checked for their types.



  Dim myVar As Any ' Variable "myVar" is a Variant

Initial Variable Values

As soon as the variable has been declared, it is automatically set to the "Null" value. Note the following conventions:

Numeric variables are automatically assigned the value "0" as soon as they are declared.

Date variables are assigned the value 0 internally; equivalent to converting the value to "0" with the Day, Month, Year or the Hour, Minute, Second function.

String variables are assigned an empty-string ("") when they are declared.

Fylki

LibreOffice Basic knows one- or multi-dimensional arrays, defined by a specified variable type. Arrays are suitable for editing lists and tables in programs. Individual elements of an array can be addressed through a numeric index.

Arrays must be declared with the Dim statement. There are several ways to define the index range of an array:


    Dim Text$(20)       '21 elements numbered from 0 to 20'
    Dim Text$(5,4)      '30 elements (a matrix of 6 x 5 elements)'
    Dim Text$(5 To 25)  '21 elements numbered from 5 to 25'
    Dim Text$(-15 To 5) '21 elements (including 0), numbered from -15 to 5'

The index range can include positive as well as negative numbers.

Fastar

Constants have a fixed value. They are only defined once in the program and cannot be redefined later:


Const ConstName=Expression

Please support us!