Dimensioning

Changes the length, measurement and guide properties of the selected dimension line.

Note Icon

If you want to modify the line style or the arrow style of a dimension line, choose Format - Line.


To access this command...

In the context menu of a dimension line, choose Dimensions.

On the Lines and Arrows toolbar, click the Dimension Line icon.

Icon

Dimension Line


A Dimension Line is always inserted on the layer called Dimension Lines. If you set that layer to invisible, you will not see any Dimension Line in your drawing.

पंक्ति

Sets the distance properties of the dimension line and the guides with respect to each other and to the baseline.

पंक्ति दूरी

Specifies the distance between the dimension line and the baseline (line distance = 0).

गाइड ओवरहैंग

Specifies the length of the left and right guides starting at the baseline (line distance = 0). Positive values extend the guides above the baseline and negative values extend the guides below the baseline.

गाइड दूरी

Specifies the length of the right and left guides starting at the dimension line. Positive values extend the guides above the dimension line and negative values extend the guides below the dimension line.

बायाँ मार्गदर्शक

Specifies the length of the left guide starting at the dimension line. Positive values extend the guide below the dimension line and negative values extend the guide above the dimension line.

दायाँ मार्गदर्शक

Specifies the length of the right guide starting at the dimension line. Positive values extend the guide below the dimension line and negative values extend the guide above the dimension line.

वस्तु के नीचे आयाम लाइन

Reverses the properties set in the Line area.

दशमलव स्थान

Specifies the number of decimal places used for the display of line properties.

लीजैंड

आयाम पाठ के गुणों को सेट करता है.

पाठ स्थिति

Determines the position of the dimension text with respect to the dimension line and the guides.

Warning Icon

The AutoVertical and AutoHorizontal checkboxes must be cleared before you can assign the Text position.


स्वचालित-खड़ा

Determines the optimal vertical position for the dimension text.

स्वचालित-आड़ा

Determines the optimal horizontal position for the dimension text.

मापक इकाई दिखाएँ

Shows or hides the dimension measurement units. You can also select a measurement unit you want to display from the list.

लकीर के समानांतर

Displays the text parallel to or at 90 degrees to the dimension line.

पूर्वावलोकन क्षेत्र

Displays a preview of the current selection.

Please support us!