LibreOffice 25.2 Help
You can control LibreOffice without using a mouse device, using only the keyboard.
On each module's main help page (for example, the LibreOffice Writer or LibreOffice Calc main help page) there is a link to access the keyboard shortcuts' help for that module.
In addition, under the keyword "Accessibility" you find step-by-step instructions about how to control the selected module without a mouse device.
F6 स्विच को बारंबार दबाने पर निम्न वस्तुओं के बीच फ़ोकस व सर्कल स्विच होते हैं:
menu bar,
every toolbar from top to bottom and from left to right,
every free window from left to right,
document
Press Shift+F6 to switch through objects in the opposite direction.
Press
+F6 to switch to the document.मेन्यू पट्टी में आने व जाने को स्विच करने के लिए F10 दबाएँ
खुला हुआ सब-मेन्यू, औजारपट्टी या वर्तमान मुक्त विंडो को एस्केप कुंजी बन्द करता है.
Press File menu). With right arrow, the next menu to the right is selected; with left arrow, the previous menu.
or F6 or F10 to select the first menu (theArrow down opens a selected menu. Any additional arrow down and up arrow move the selection through the menu commands. With right arrow you open any existing submenus.
चयनित मेन्यू कमांड को चलाने के लिए एन्टर दबाएँ
Press F6 repeatedly until the first icon on the toolbar is selected. Use the right and left arrows to select an icon on a horizontal toolbar. Similarly, use the up and down arrows to select an icon on a vertical toolbar. The Home key selects the first icon on a toolbar and the End key, the last.
Press Enter to execute the selected icon. If the selected icon normally demands a consecutive mouse action, such as inserting a rectangle, then pressing the Enter key is not sufficient: in these cases press
+Enter.Pressing
+Enter on an icon for creating a draw object. A draw object will be placed into the middle of the view, with a predefined size.Press
+Enter on the Selection tool to select the first draw object in the document. If you want to edit, size, or move the selected draw object, first use +F6 to set the focus into the document.If a toolbar is longer than can be displayed on screen, it shows an icon at the right or lower edge. Select the toolbar and press PageUp or PageDown to display the remaining icons.
Press the down arrow or right arrow to open the selected toolbar. This is equivalent to a mouse click. In the toolbar use the right arrow and left arrow keys. The Home and End keys select the first and last icon in the toolbar, respectively.
औजार पट्टी को एस्केप के जरिए चुनें. माउस के बगैर औजारपट्टी को खिसकाना संभव नहीं है.
कॉम्बो बक्सा चुनें. एन्टर दबाएँ.
Use the down arrow or Page Down key to scroll down the combo box entries, or the up arrow or Page Up key to scroll upwards. The Home key takes you to the first entry and the End key takes you to the last entry.
चयनित प्रविष्टि को चलाने के लिए एन्टर दबाएँ.
In several windows, dialogs, and in the table control field, there are tables to select data, for instance, in the right part of the Data Source View. The following keys are used for selections in these tables:
स्पेसबार: वर्तमान पंक्ति के चयन तथा किसी चयन को रद्द करने के बीच स्विच करता है परंतु तब नहीं जब वर्तमान कक्ष संपादन मोड में होता है.
+spacebar: switches between selection of the current row and cancellation of this selection.
+Shift+spacebar: switches between selection of the current column and cancellation of this selection.
+Up Arrow or +Down Arrow: moves the window separator between table and form, for instance in the bibliography database.
In a table control or in the data source view, the Tab key moves to the next column. To move to the next control, press
+Tab. To move to the previous control, press Shift+ +Tab.First press
+spacebar.A system menu opens with menu commands like Move, Resize and Close.
कमांड चुनें (नीचे तीर, फिर एन्टर).
अब आप तीर कुंजियों का इस्तेमाल संवाद या विंडो को खिसकाने या आकार बदलने के लिये कर सकते हैं.
परिवर्तन को स्वीकारने के लिए एन्टर कुंजी दबाएँ. परिवर्तनों को रद्द करने के लिए एस्केप बटन दबाएँ.
Press F6 until the window or toolbar is selected.
Press
+Shift+F10.Press Shift+F4 to select the first object in the current document. When an object is selected, press Tab to select the next object, or press Esc to go back to the text.
एंटर कुंजी द्वारा चयनित ओएलई वस्तु को सक्रिय किया जा सकता है.
चयनित वस्तु को एक ग्रिड रेज़ॉल्यूशन इकाई खिसकाने के लिए तीर कुंजियों का इस्तेमाल करें.
Set the grid resolution unit with - LibreOffice Writer - Grid in the Resolution area. If you enter a number greater than 1 in the Subdivision area, you must press the arrow key as often as the number states to move the selected object by one grid resolution unit.
Use the
and arrow keys to move the selected object by one pixel.Use
+Tab to enter the handle edit mode. The upper left handle is the active handle, it starts blinking. Use +Tab to select the next handle. Press Escape to exit the handle edit mode.हैण्डल संपादन मोड में, तीर कुंजियाँ चयनित हैण्डल को खिसकाती हैं जो कि वस्तु आकार को परिवर्तित करता है.
You can move the anchor of an object with the arrow keys. First enter the handle edit mode and select the anchor. Depending on the type of anchor, you can then move the anchor in different directions.
वस्तु चुनें...
Enter the handle edit mode with
+Tab.The upper left handle starts blinking. Press
+Tab several times, until no handle blinks. This signals that now the anchor of the object is activated.एंकर को खिसकाने के लिए तीर कुंजियों का इस्तेमाल करें. जैसा समुचित होगा, वस्तु एंकर का अनुसरण करेगा.
आप चयनित वस्तु के एंकर को बदल सकते हैं - उदाहरण के लिए, वस्तु के कॉन्टेक्स्ट मेन्यू में.
If the object is anchored To Paragraph, the arrow keys move the object to the previous or next paragraph.
If the object is anchored To page, the keys Page Up or Page Down move it to the previous or next page.
If the object is anchored To character, the Arrow keys move it through the current paragraph.
If the object is anchored As character, no anchor icon exists. You cannot move the object.
If the object is anchored To frame, the Arrow keys move it to the next frame in the respective direction.
+ Shift + F4 opens and closes the data source view.
F6: switches between document and toolbars.
+ (plus key): expands the selected entry in the data source explorer.
- (minus key): collapses the selected entry in the data source explorer.
+Shift+E: switches between data source explorer and table.
F6: switches between object bar, table view, and selection area.
+Up arrow or +Down arrow: moves the border between table view and selection area up or down.
+Arrow key: moves the selected table in the direction of the arrow.
+Shift+Arrow key: resizes the selected table in the table view.
डिलीट: तालिका दृश्य में से चयनित तालिका या कनेक्शन को मिटाता है.
टैब: तालिका दृश्य में तालिका तथा कनेक्शनों के बीच स्विच करता है.
Enter: when a connection is selected, the Enter key opens the Properties dialog of the connection.
प्रविष्ट करें: जब तालिका चयनित होती है, सूची बक्से से चयन क्षेत्र में एंटर कुंजी प्रथम डाटा क्षेत्र में प्रविष्ट होती है.
+Left Arrow or Right Arrow: moves the selected column to the left or to the right.
F6: switches between toolbar, column view, and properties area.
Press Tab to select an icon. If you selected one of the icons from Rectangle to Freeform Polygon and you press +Enter, an object of the selected type is created in default size.
If you press Enter while the icon Select is selected, the focus is set into the image window of the ImageMap Editor. Press Esc to set the focus back to the icons and input boxes.
If the Select icon is selected and you press +Enter, the first object in the image window gets selected.
Use the icon Edit Points to switch into the point edit mode for polygons and back.
Use +Tab in the image window to select the next point. Use Shift++Tab to select the previous point.
चयनित वस्तु को मिटाने के लिए छवि विंडो में फ़ोकस कर मिटाएँ कुंजी का इस्तेमाल करें
Press Shift+F1 to display the Extended Tips for the currently selected command, icon or control.
मुख्य मदद पृष्ठों में, अगले हायपरलिंक पर जाने के लिए टैब का इस्तेमाल करें तथा पिछली कड़ी पर जाने के लिए शिफ़्ट+टैब का इस्तेमाल करें.
चयनित हायपरलिंक को चलाने के लिए कृपया एन्टर कुंजी दबाएँ.
पिछले मदद पृष्ठ पर वापस जाने के लिए एंटर कुंजी के ऊपर स्थित बैकस्पेस कुंजी को दबाएँ.
बायाँ या दायाँ तीर: एक स्थान बायाँ या दायाँ जाएँ
+Left Arrow or +Right Arrow: jump to the previous or to the next split
+Shift+Left Arrow or +Shift+Right Arrow: move a split one position to the left or to the right
होम या एण्ड: प्रथम या अंतिम संभव स्थान पर जाएँ
+Home or +End: jump to the first or the last split
Shift++Home or Shift++End: move split to the first or to the last position
स्पेस कुंजी: विभाजन प्रविष्ट करता है या मिटाता है
इंसर्ट कुंजी: विभाजन प्रविष्ट करता है (मौजूदा विभाजन को अपरिवर्तित रखता है)
डिलीट कुंजी: विभाजन को मिटाता है
शिफ़्ट+डिलीट: सभी विभाजनों को मिटाता है
Up Arrow or Down Arrow: scroll table down or up one row
Page Up or Page Down: scroll table down or up one page
एस्केप कुंजी (माउस खींचने के दौरान): खींचना रद्द करें, विभाजन को पुराने स्थान पर खिसकाएँ
बायाँ तीर या दायाँ तीर: बायाँ या दायाँ स्तम्भ चुनें तथा अन्य चयन साफ करें
+Left Arrow or +Right Arrow: move focus to the left or to the right column (does not change selection)
शिफ़्ट+बायाँ तीर या शिफ़्ट+दायाँ तीर: चयनित सीमा को फैलाता या सिकोड़ता है
+Shift+Left Arrow or +Shift+Right Arrow: expand or shrink the selected range (does not change other selections)
Home or End: select the first or the last column (use Shift or as with cursor keys)
शिफ़्ट+स्पेस कुंजी: अंतिम चयनित स्तम्भ से वर्तमान स्तम्भ तक दायरा चुनें
+Shift+Space key: select the range from the last selected column to the current column (does not change other selections)
+A: select all columns
Shift+F10: open a context menu
+1 ... +7: set the 1st ... 7th column type for the selected columns
Up Arrow or Down Arrow: scroll table down or up one row
Page Up or Page Down: scroll table down or up one page
+Home or +End: scroll to the top or bottom of a table
टैब के जरिए संवाद में सभी नियंत्रकों के बीच स्विच कर सकते हैं
+Down Arrow opens a combo box. Enter selects the current entry in the combo box.
Arrow buttons move through the main selection area. Spacebar adds the current character to the list of characters to be inserted.