Connectors

Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.

There are four types of connector lines:

1. Standard (90-degree angle bends)

2. Line (two bends)

3. Straight

4. Curved

When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object.

To draw a connector line, click a connection point on an object, drag to a connection point on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location.

સાંકળનાર

Draws a connector with one or more 90-degree angle bends. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત તીરથી થાય છે

Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત તીરથી થાય છે

Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

Connector Ends with Arrow

Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

Connector Ends with Circle

Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.

Line Connector

Draws a connector that bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

Straight Connector Starts with Arrow

Draws a connector that starts with an arrow and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

સાંકળનારનો અંત તીરથી થાય છે

Draws a connector that ends with an arrow and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

Connector Ends with Arrow

Draws a connector that bends near a connection point and has arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a connector that starts with a circle and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a connector that ends with a circle and bends near a connection point. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

Connector Ends with Circle

Draws a connector that bends near a connection point and has circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release. To adjust the length of the line segment between a bend point and a connection point, click the connector and drag the bend point.

Straight Connector

Draws a straight line connector. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a straight line connector with circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.

Curved Connector

Draws a curved line connector. Click a connection point on an object, drag to a connection point on another object, and then release.

Straight Connector Starts with Arrow

Draws a curved line connector with an arrow at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત તીરથી થાય છે

Draws a curved line connector with an arrow at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત તીરથી થાય છે

Draws a curved line connector with arrows at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a curved line connector with a circle at the starting point. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a curved line connector with a circle at the endpoint. Click a connection point on an object, drag to a connection point on another object, and then release.

સાંકળનારનો અંત વર્તુળથી થાય છે

Draws a curved line connector with circles at both ends. Click a connection point on an object, drag to a connection point on another object, and then release.