གིརིཌི།

Defines the grid settings for creating and moving objects.

བརྡ་བཀོད་འདི་འཛུལ་སྤྱོད་འབད་ནི་ལུ...

Open a presentation document, choose - LibreOffice Impress/LibreOffice Draw - Grid.


གིརིཌི།

Specifies the settings for the configurable grid on your document pages. This grid helps you determine the exact position of your objects. You can also set this grid in line with the "magnetic" snap grid.

If you have activated the snap grid but wish to move or create individual objects without constraining them, keep the Shift key pressed to deactivate this function for as long as needed.

ཧུམ་ཆ།

ཐད་སྙོམས།

Defines the unit of measure for the spacing between grid points on the X-axis.

ཀེར་ཕྲང་།

Defines the grid points spacing in the desired unit of measurement on the Y-axis.

ཡན་ལག་སྡེ་ཚན།

ཐད་སྙོམས།

ཨེཀསི་་-ཚད་ཐིག་གུ་གིརིཌི་པོ་འིནཊིསི་བར་ན་བར་མཚམས་པོ་འིནཊིསི་གི་གྲངས་གསལ་བཀོད་འབད།

ཀེར་ཕྲང་།

ཝའི་-ཚད་ཐིག་གུ་གིརིཌི་པོ་འིནཊིསི་བར་ན་བར་མཚམས་པོ་འིནཊིསི་གི་གྲངས་གསལ་བཀོད་འབད།

མཉམ་འབྱུང་འབད་ནིའི་ཚད་ཐིག་ཚུ།

Specifies whether to change the current grid settings symmetrically. The resolution and subdivision for the X and Y axes remain the same.

པར་བཏབ།

To snap guides

Snaps the edge of a dragged object to the nearest snap guide when you release the mouse.

You can also define this setting by using the icon, which is available in the Options bar in a presentation or drawing document.

ཤོག་ལེབ་ས་སྟོང་ཚུ་ལུ།

Specifies whether to align the contour of the graphic object to the nearest page margin.

ཚད་རིས་ཚུའི་དངོས་པོ་གི་འོད་རྟགས་ ཡང་ན་ བུར་གཞོང་གྲལ་ཐིག་འདི་པར་བཏབ་ནིའི་ཁྱབ་ཚད་ནང་ངེས་པར་འོང་དགོ།

གསལ་སྟོན་ཡང་ན་པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་ ས་སྟོང་ཚུ་ལུ་པར་བཏབ་ནིའི་ངོས་དཔར་གྱི་ཐོག་ལས་ འཛུལ་སྤྱོད་ འབད་ཚུགས།

དངོས་པོའི་གཞི་ཁྲམ་ལུ།

Specifies whether to align the contour of the graphic object to the border of the nearest graphic object.

ཚད་རིས་ཚུའི་དངོས་པོ་གི་བུར་གཞོང་གྲལ་ཐིག་ ཡང་ན་ འོད་རྟགས་འདི་པར་བཏབ་ནིའི་ཁཡབ་ཚད་ནང་ངེས་པར་འོང་དགོ།

གསལ་སྟོན་ ཡང་ན་ པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་དངོས་པོའི་མཐའ་མཚམས་ལུ་པར་བཏབ་ འཛུལ་སྤྱོད་ འབད་ ཚུགས།

དངོས་པོའི་ས་ཚིགས་ཚུ་ལུ།

Specifies whether to align the contour of the graphic object to the points of the nearest graphic object.

འ་ནི་འདི་པར་བཏབ་ནིའི་ཁྱབ་ཚད་ནང་ཚད་རིས་ཚུའི་དངོས་པོ་གི་བུར་གཞོང་གྲལ་ཐིག་ ཡང་ན་ འོད་རྟགས་ཡོད་པ་ཅིན་རྐྱངམ་གཅིག་འཇུག་སྤྱོད་འབད་ཚུགས།

གསལ་སྟོན་ ཡང་ན་ པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་ གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་ ཐོག་ལས་ འཛུལ་སྤྱོད་ འབད་ཚུགས།

པར་བཏབ་ནིའི་ཁྱབ་ཚད།

Defines the snap distance between the mouse pointer and the object contour. LibreOffice Impress snaps to a snap point if the mouse pointer is nearer than the distance selected in the Snap range control.

Constrain Objects

དངོས་པོ་ཚུ་གསར་བསྐྲུན་ ཡང་ན་ སྤོ་བཤུད་འབདཝ་ད།

Specifies that graphic objects are restricted vertically, horizontally or diagonally (45°) when creating or moving them. You can temporarily deactivate this setting by pressing the Shift key.

མཐའམ་ཚུ་རྒྱ་བསྐྱེད་འབད།

Specifies that a square is created based on the longer side of a rectangle when the Shift key is pressed before you release the mouse button. This also applies to an ellipse (a circle will be created based on the longest diameter of the ellipse). When the Extend edges box is not marked, a square or a circle will be created based on the shorter side or diameter.

པད་སྐོར་བསྒྱིརཝ་ད།

Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control. If you want to rotate an object outside the defined angle, press the Shift key when rotating. Release the key when the desired rotation angle is reached.

སྐུགས་མར་ཕབ།

Defines the angle for point reduction. When working with polygons, you might find it useful to reduce their editing points.

Please support us!