Position and Size

Specifies the size and the position of the selected image, frame, or OLE object on a page.

আকার

প্রস্থ

Enter the width that you want for the selected object.

সম্পর্কিত

পাঠ্য পৃষ্ঠার প্রস্থের শতকরা হিসেবে নির্বাচিত বস্তুর প্রস্থ গণনা করা হয়।

Relative width relation

Decides what 100% width means: either text area (excluding margins) or the entire page (including margins).

উচ্চতা

Enter the height that you want for the selected object.

সম্পর্কিত

পৃষ্ঠা পাঠ্য এলাকার শতকরা হিসেবে নির্বাচিত বস্তুর উচ্চতা গণনা করা হয়।

Relative height relation

Decides what 100% height means: either text area (excluding margins) or the entire page (including margins).

অনুপাত রাখুন

Maintains the height and width ratio when you change the width or the height setting.

প্রকৃত আকার

প্রকৃত মানে নির্বাচিত মানের আকার সেটিং পুনঃনির্ধারণ করুন।

AutoSize

ফ্রেমের বিষযবস্তুর সাথে মিলানোর জন্য স্বয়ংক্রিযভাবে ফ্রেমের প্রস্থ অথবা উচ্চতা সমন্বয় করুন। যদি আপনি চান, আপনি ফ্রেমের জন্য সর্বনিম্ন প্রস্থ অথবা সর্বনিম্ন উচ্চতা সুনির্দিষ্ট ভাবে উল্লেখ করতে পারবেন।

Protect

Specifies protection options for the selected item.

Contents

Prevents changes to the contents of the selected item.

You can still copy the contents of the selected item.

Position

Locks the position of the selected item in the current document.

Size

Locks the size of the selected item.

নোঙ্গর

Specify the anchoring options for the selected object or frame. The anchor options are not available when you open the dialog from the Styles window.

পৃষ্ঠায়

Anchors the selection to the current page.

অনুচ্ছেদে

Anchors the selection to the current paragraph.

অক্ষরে

Anchors the selection to a character. This is the default for images.

অক্ষরে

Anchors the selection as character. The height of the current line is resized to match the height of the selection.

অবস্থান

বর্তমান পৃষ্ঠায় নির্বাচিত বস্তুর অবস্থান সুনির্দিষ্ট ভাবে উল্লেখ করুন।

অনুভূমিক

Select the horizontal alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list. This option is not available if anchor as character is selected.

এর দ্বারা

Enter the amount of space to leave between the left edge of the selected object and the reference point that you select in the To box. This option is only available if you select "From Left" in the Horizontal box.

প্রতি

Select the region or reference line for the selected horizontal alignment option. The following options are available:

• Paragraph area: the object is positioned considering the whole width available for the paragraph, including indent spaces.

• Paragraph text area: the object is positioned considering the whole width available for text in the paragraph, excluding indent spaces.

• Left of paragraph text area: the object is positioned in the region from the left text boundary to the first character on the left edge of the anchored paragraph text. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the first column, then the region starts at the left column margin.

• Right of paragraph text area: the object is positioned in the region from the last character on the right edge of anchored paragraph text to the right text boundary. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the last column then the region ends at the right column margin.

• Left of page text area: the object is positioned in the region between the left edge of the page and the left margin plus any left page padding.

• Right of page text area: the object is positioned in the region between the right edge of the page and the right margin plus any right page padding.

• Entire page: the object is positioned considering the whole width of the page, from the left to the right page borders.

• Page text area: from the inner edge of the left page padding to the inner edge of the right page padding.

• Character: the object is positioned considering the horizontal space used by the character.

Be aware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

জোড় পৃষ্ঠায় মিরর

Reverses the current horizontal alignment settings on even pages.

উল্লম্ব

Select the vertical alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list.

এর দ্বারা

Enter the amount of space to leave from the top edge of the object to the region or reference line selected in the to dropdown list. This option is active only when the following combinations of Vertical and Anchor are selected. For these combinations, you can specify the amount of space to leave from:

Vertical		with Anchor
From top	Top edge of selected region. Positive values move the object down, negative values up.	To page, To paragraph, To character or To frame
From bottom	Selected reference line. Positive values move the object up, negative values down.	To character or As character

প্রতি

Select the region or reference line for the vertical alignment. The object can be positioned in relation to the following regions or reference lines:

• Margin: Depending on the anchoring type, the object is positioned considering the space between the top margin and the character ("To character" anchoring) or bottom edge of the paragraph ("To paragraph" anchoring) where the anchor is placed.

• Paragraph text area: the object is positioned considering the beginning of the paragraph where the anchor is placed.

• Entire page: the object is positioned considering the full page height, from top to bottom page borders.

• Page text area: the object is positioned from the bottom edge of the top padding area to the top edge of the bottom padding area.

• Character: available only for "To character" or "As character" anchoring, the object is positioned relative to the region between the top border and bottom border of the character immediately before where the anchor is placed. A character formatted with a common border with other characters or objects uses the region for the highest character or object in the common border.

• Line of text: available only for "To character" anchoring, the object is positioned considering the height of the line of text where the anchor is placed.

• Baseline: available only for "As character" anchoring, this option will position the object considering the text baseline over which all characters are placed.

• Row: available only for "As character" anchoring, this option will position the object considering the height of the row where the anchor is placed.

• Entire frame: available only for "To frame" anchoring, the outer edges of the frame.

• Frame text area: available only for "To frame" anchoring, the text area of the frame.

Keep inside text boundaries

Keeps the selected object within the layout boundaries of the text that the object is anchored to. To place the selected object anywhere in your document, do not select this option.

By default, the Keep inside text boundaries option is selected when you open a document that was created in a version of Writer older than OpenOffice.org 2.0. However, this option is not selected when you create a document or when you open a document in Microsoft Word format (*.doc).

Allow frame to split across pages

Allows the frame to continue on a next page when the content of the frame doesn't fit the current page anymore. Content around the frame will be wrapped on the last page.

By default, the Allow frame to split across pages option is disabled when you create a Text Frame in Writer. However, this option is selected when you open a document in Microsoft Word formats, containing floating tables.

সবুজ আয়তক্ষেত্র নির্বাচিত বস্তু প্রতিনিধিত্ব করে এবং লাল আযতক্ষেত্র প্রান্তিককরণ রেফারেন্স বিন্দু প্রতিনিধিত্ব করে। যদি আপনি অজেক্টটি অক্ষর হিসেবে নোঙ্গর করেন, রেফারেন্স আয়তক্ষেত্র একটি লাল রেখায় পরিবর্তীত হবে।