ባጠቃላይ

In the General section, you can select default settings for saving documents, and can select default file formats.

መጫኛ

በተጠቃሚው-የተወሰነ ማሰናጃ ሰነድ አቀማመጥ መጫኛ

በ ተጠቃሚው-የተወሰነውን ማሰናጃ በ ሰነድ ውስጥ የተቀመጠውን በ ሰነድ ውስጥ መጫኛ

If Load user-specific settings with the document is not selected, the following user-specific settings still apply:

• ማሰናጃ ዝግጁ ነው ለ ፋይል - ማተሚያ - ምርጫዎች

• የ ፋክስ ስም

• የ ክፍተት ምርጫ ለ አንቀጽ ከ ጽሁፍ ሰንጠረዥ በፊት

• መረጃ ስለ ራሱ በራሱ ማሻሻያ ለ አገናኝ ሜዳ ተግባሮች እና ቻርትስ

• መረጃ እንዴት እንደሚሰሩ በ Asian ባህሪ አቀራረብ

ይህ ማሰናጃ ሁል ጊዜ ከ ሰነዱ ጋር ይጫናል: ምርጫ ማድረጊያው ላይ ምልክት ቢደረግም ወይንም ባይደረግም:

• የ ዳታ ምንጩ ተገናኝቷል ከ ሰነዱ እና ከ መመልከቻው ጋር

ከ ሰነዱ ጋር የ ማተሚያውን ማሰናጃ መጫኛ

Regardless of whether this option is checked, the current printer settings is saved with the document.

If Load printer settings with the document is enabled, the current printer settings is loaded with the document. In an office setting, this may result in the document being printed on a different printer, perhaps located in another floor or another building, unless you manually select the correct printer in the Print dialog.

If Load printer settings with the document is disabled, the saved settings are not used and the document is printed on the system printer, unless overridden by selecting a different printer in the Print dialog.

Load view position with the document even if it was saved by a different user

Loads the view position settings saved in a document with the document even if it was saved by a different user.

ማስቀመጫ

በራሱ ማዳኛ መረጃን ማስቀመጫ በየ

Specifies that LibreOffice saves the information needed to restore all modified documents in case of a crash.

ደቂቃዎች

Specifies the time interval in minutes before AutoRecovery information is saved for a document.

Automatically save the document instead

Specifies that LibreOffice saves the modified document itself instead of creating a temporary AutoRecovery version. Uses the time interval specified in Minutes.

የ ሰነድ ባህሪዎችን ከማስቀመጥ በፊት ማረሚያ

መወሰኛ የ ባህሪዎች ንግግር ይታይ እንደሆን ሁልጊዜ ሲመርጡ የ ማስቀመጫ እንደ ትእዛዝ

ሁል ጊዜ ተተኪ ኮፒ መፍጠሪያ

Saves the previous version of a document as a backup copy whenever you save a document. Every time LibreOffice creates a backup copy, the previous backup copy is replaced. The backup copy gets the extension .BAK.

የተተኪ ኮፒ ፋይል አካባቢ ለመቀየር ይምረጡ - LibreOffice - መንገድ እና ከዛ የ አዲሱን ተተኪ ፋይል መንገድ ያስገቡ

Place backup in same folder as document

Backup copy is saved to the same folder as the document. If the backup copy cannot be saved in the same folder for some reason, then LibreOffice tries to save the copy in the Backups folder specified in Paths.

Save URLs relative to file system

This option allows you to select the default for relative addressing of URLs in the file system and on the Internet. Relative addressing is only possible if the source document and the referenced document are both on the same drive.

አንፃራዊ አድራሻ ሁልጊዜ የሚጀምረው ከ ዳይሬክቶሪ ነው የ አሁኑ ሰነድ ካለበት: በ አንፃሩ ግን ፍጹም አድራሻ ሁልጊዜ የሚጀምረው ከ root ዳይሬክቶሪ ነው: የሚቀጥለው ሰንጠረዥ ልዩነቱን ያሳያል አገባቡን የ አንፃራዊ እና ፍጹም አድራሻ ማመሳከሪያ:

ምሳሌዎች	የፋይል ስርአት	ኢንተርኔት
ዝምድናው	../ምስሎች/img.jpg	../ምስሎች/img.jpg
ፍጹም	file:///C:/work/images/img.jpg	https://myserver.com/work/images/img.jpg

Select this box for relative saving of URLs in the file system.

URLs ማስቀመጫ ከ ኢንተርኔት አንፃር

Select this box for relative saving of URLs to the Internet.

ነባር የ ፋይል አቀራረብ እና የ ODF ማሰናጃዎች

የ ODF አቀራረብ አትም

LibreOffice 7.0 supports the OpenDocument format (ODF) version 1.3. The prior versions of LibreOffice support the file format ODF 1.2. Prior file formats cannot store all new features of the new software.

OpenOffice.org 3 and StarOffice 9 introduced new features which have to be saved using the OpenDocument format (ODF) version 1.2. The prior versions of OpenOffice.org 2 and StarOffice 8 support the file formats ODF 1.0/1.1. Those prior file formats cannot store all new features of the new software.

Current LibreOffice versions can open documents in ODF formats 1.0/1.1, 1.2, and 1.3.

When you save a document, you can select whether to save the document in the format ODF 1.3, ODF 1.3 Extended, ODF 1.2, ODF 1.2 Extended, ODF 1.2 Extended (compatibility mode), or in the prior format ODF 1.0/1.1.

Some companies or organizations may require ODF documents in the ODF 1.0/1.1, or ODF 1.2 format. You can select these format to save in the listbox. These older formats cannot store all new features, so the new format ODF 1.3 (Extended) is recommended where possible.

The ODF 1.2 Extended (compatibility mode) is a more backward-compatible ODF 1.2 extended mode. It uses features that are deprecated in ODF 1.2 and/or it is 'bug-compatible' to older OpenOffice.org versions. It may be useful if you need to interchange ODF documents with users who use pre-ODF 1.2 or ODF 1.2-only legacy applications.

የ ሰነዱ አይነት

የ ሰነድ አይነት ይወስኑ እርስዎ መግለጽ የሚፈልጉትን እንደ ነባር የ ፋይል አቀራረብ

ሁልጊዜ ማስቀመጫ እንደ

ይወስኑ የ ተመረጠው ሰነድ አይነት በ ግራ በኩል ሁልጊዜ እንዴት እንደሚቀመጥ የዚህ አይነት ፋይል: እርስዎ መምረጥ ይችላሉ ሌላ የ ፋይል አይነት ለ አሁኑ ሰነድ በ ማስቀመጫ እንደ ንግግር ውስጥ

በ ODF ወይንም በ ነባር አቀማመጥ ሳይቀመጥ ሲቀር ማስጠንቀቂያ

እርስዎ መምረጥ ይችላሉ የ ማስጠንቀቂያ መልእክት እንዲታይ እርስዎ ሰነድ በሚያስቀምጡ ጊዜ በ OpenDocument አቀራረብ ያልሆነ ወይንም እርስዎ ካላሰናዱ ነባር አቀራረብ በ መጫኛ/ማስቀመጫ - ባጠቃላይ በ ምርጫ ንግግር ሳጥን ውስጥ

እርስዎ መምረጥ ይችላሉ የትኛው የ ፋይል አቀራረብ እንደ ነባር እንደሚፈጸም የ ተለያዩ አይነት ሰነዶች በሚያስቀምጡ ጊዜ: እርስዎ ሁል ጊዜ ሰነዶች የሚቀያየሩ ከሆነ የ Microsoft Office የሚጠቀሙ: ለምሳሌ: እርስዎ እዚህ መግለጽ ይችላሉ: LibreOffice እንዲጠቀም የ Microsoft Office ፋይል አቀራረብ እንደ ነባር እንዲጠቀም