རིགས་

Specifies the size and the position of the selected object or frame on a page.

བཀའ་ཚིག་ལ་བཅར་འདྲི་...

Choose Format - Image - Properties - Type tab.

Choose Format - Frame and Object - Properties - Type tab.

Choose View - Styles - open context menu Modify/New - Type tab.

Choose Insert - Frame - Frame - Type tab.


ཆེ་ཆུང་།

ཞེང་ཚད།

Enter the width that you want for the selected object.

ལྟོས་བཅས་ཀྱི།

འདེམས་ངེས་པའི་བྱ་ཡུལ་གྱི་ཞེང་ཚད་དེ་ཤོག་ངོས་གཏགས་པར་ཁོང་ཀྱིས་བརྒྱ་ཆའི་སྡུར་ཟིན་བཀོད་སྒྲིག་

Relative width relation

Decides what 100% width means: either text area (excluding margins) or the entire page (including margins).

མཐོ་ཚད།

Enter the height that you want for the selected object.

ལྟོས་བཅས་ཀྱི།

རྩིས་འཁོར་གྱིས་འདེམས་ངེས་པའི་བྱ་ཡུལ་མཐོ་ཚད་དེ་ཤོག་ངོས་གཏགས་པར་ཁོངས་ཀྱིས་བསྡུར་བ་ཡིན་

Relative height relation

Decides what 100% height means: either text area (excluding margins) or the entire page (including margins).

རྒྱུན་འཁྱོངས་སྡུར་ཚད།

Maintains the height and width ratio when you change the width or the height setting.

གདོད་མའི་ཆེ་ཆུང་།

འདེམས་ངེས་པའི་བྱ་ཡུལ་་ཆེ་ཆུང་བཀོད་སྒྲིག་གདོད་མའི་ཐང་ལ་བསྐྱར་བཀོད་བྱེད།

ཟུར་མཆན་རིས་རྟགས་

སྒྲོམ་ནང་འདེམས་གཞི་བེད་སྤྱོད་མི་ཐུབ།


རང་འགུལ།

རང་འགུལ་ཚང་གི་ཞེང་ཚད་དང་མཐོ་ཚད་ལེགས་སྒྲིག་བྱས་ཏེ་ཚང་ནང་གི་ནང་དོན་མཚོན་དགོས་ གལ་ཏེ་ཁོ་ན་ཚང་གི་ཞེང་ཆུང་ཤོས་དང་མཐོ་ཚད་ཆུང་ཤོས་གཏན་འཁེལ་དགོས།

ཟུར་མཆན་རིས་རྟགས་

ཚང་བདམས་ན་ རང་འགུལ་འདེམས་གཞི་གཞི་ནས་སྤྱོད་ཐུབ།


འཆིང་རྒྱབ།

Specify the anchoring options for the selected object or frame. The anchor options are not available when you open the dialog from the Styles window.

ཤོག་ངོས་བར།

Anchors the selection to the current page.

དུམ་མཚམས་ཀྱི་ཐོག་ལ།

Anchors the selection to the current paragraph.

ཡིག་རྟགས་བར།

Anchors the selection to a character.

ཡིག་རྟགས་ལ་རྩི་བ།

Anchors the selection as character. The height of the current line is resized to match the height of the selection.

གནས་ས།

འདེམས་ངེས་པའི་བྱ་ཡུལ་དེ་མིན་སྔའི་ཤོག་ངོས་ནང་གི་གནས་ས་གཏན་འཁེལ།

ཆུ་སྙོམས་ཁ་ཕྱོགས།

Select the horizontal alignment option for the object. This option is not available if you chose "anchor as character".

ནས།

Enter the amount of space to leave between the left edge of the selected object and the reference point that you select in the To box. This option is only available if you select "From Left" in the Horizontal box.

བར།

Select the reference point for the selected horizontal alignment option.

ཁྱེད་ཀྱིས་ སྔོན་ལྟའི་སྒྲོམ་ནང་འདེམ་ངེས་པའི་སྙོམ་སྒྲིག་འདེམས་གཞི་ཡི་འབྲས་བུ་ལྟ་ཞིབ།

ཆ་གྲང་ཤོག་ལྷེའི་ཕྲ་བཪྙན།

Reverses the current horizontal alignment settings on even pages.

དྲན་བརྡའི་རིས་རྟགས་

You can also use the Image flip options to adjust the layout of objects on even and odd pages.


དྲང་ཕྱང་ཁ་ཕྱོགས།

Select the vertical alignment option for the object.

ཟུར་མཆན་རིས་རྟགས་

གལ་ཏེ་ཁྱོད་རང་བྱ་ཡུལ་ཚད་མཐོའི་ནན་འཕྱང་བརྒྱབ་ན་མཐིལ་མཐའ་དང་དཀྱིལ་བསྡུ་སྙོམས་གཤིས་འདེམས་གཞི་ཁོ་ན་བེད་སྤྱོད།


ནས།

Enter the amount of space to leave between the top edge of the selected object and the reference point that you select in the To box. This option is only available if you select "From Top" or "From Bottom" (as character) in the Vertical box.

བར།

Select the reference point for the selected vertical alignment option.

Keep inside text boundaries

Keeps the selected object within the layout boundaries of the text that the object is anchored to. To place the selected object anywhere in your document, do not select this option.

By default, the Keep inside text boundaries option is selected when you open a document that was created in a version of Writer older than OpenOffice.org 2.0. However, this option is not selected when you create a document or when you open a document in Microsoft Word format (*.doc).

སྔོན་ལྟ།

མིག་སྔར་བདམས་པའི་ནང་དོན་སྔོན་ལྟ་བྱེད།

ལྗང་མདོག་གྲུ་བཞི་འདེམས་ངེས་པའི་བྱ་ཡུལ་མཚོན་ དམར་མདོག་གྲུ་བཞི་སྙོམ་སྒྲིག་ལྟོས་བཞི་མཚོན། གལ་ཏེ་བྱ་ཡུལ་ཡིན་རྟགས་ལ་རྩིས་ཏེ་འཕྱང་རྒྱབ་ན་ལྟོས་གཞིའི་གྲུ་བཞི་ཐོག་མར་ལ་སྒྱུར་རོ།

རྣམ་བཞག - འཆིང་རྒྱབ་

Format - Align

Please support us!