ལིང་ཚེ་རྟེན་གྲངས།

འདི་རིགས་ནང་ལིང་ཚེ་རྟེན་གྲངས་ཚུད་ཡོད།

གང་ཞིག་ལ་ལིང་ཚེ་ཡིན་ནམ་

གྲངས་ཐང་ཚུད་པའི་ལས་དེབ་ནང་ཕན་ཚུན་འབྲེལ་བའི་དྲ་མིག་ཁྱབ་ཁོངས་ལ་ལིང་ཚེ་ཞེས་བརྗོད། ཕྲེང་ 3 སྟར་ 3 ལས་གྲུབ་པའི་གྲུ་བཞི་ཁ་གང་མའི་ཁྱབ་ཁོངས་ཤིག་ནི་ 3 x 3 ལིང་ཚེ་ཞིག་ཡིན།

A

B

C

1

7

31

33

2

95

17

2

3

5

10

50


ཆུང་ཤོས་ཀྱི་ལིང་ཚེ་ནི་ཉེ་འབྲེལ་གྱི་དྲ་མིག་གཉིས་ལས་གྲུབ་པའི་ 1 x 2 འན་ཡང་ན་ 2 x 1སོགས་ལིང་ཚེ་ཡིན།

གང་ཞིག་ལ་ལིང་ཚེ་སྤྱི་འགྲོས་ཡིན་ནམ་

དྲ་མིག་ས་ཁོངས་ནང་གྲངས་ཐང་ཡོད་ཚད་ལ་རྩིས་རྒྱག་ཐུབ་པའི་སྤྱི་འགྲོས་ལ་ལིང་ཚེ་སྤྱི་འགྲོས་ཞེས་བརྗོད། ལིང་ཚེ་སྤྱི་འགྲོས་དང་སྤྱི་འགྲོས་གཞན་གྱི་ཁྱད་པར་ནི་སྔ་མས་དུས་གཅིག་ཏུ་ཐང་མང་པོ་ལས་སྣོན་ཐུབ་པ་ལས་ཐང་གཅིག་རང་འདུས་པ་མིན།

ལིང་ཚེ་སྤྱི་འགྲོས་ཀྱིས་ཐང་མང་པོ་ལས་སྣོན་ཐུབ་པ་མ་ཟད་ད་དུང་ཐང་མང་པོ་ཕྱིར་སློག་ཐུབ། ལིང་ཚེ་སྤྱི་འགྲོས་ཀྱིས་འབྲས་བུ་ཡང་ལིང་ཚེ་ཞིག་ཡིན།

To multiply the values in the individual cells by 10 in the above array, you do not need to apply a formula to each individual cell or value. Instead you just need to use a single array formula. Select a range of 3 x 3 cells on another part of the spreadsheet, enter the formula =10*A1:C3 and confirm this entry using the key combination + Shift + Enter. The result is a 3 x 3 array in which the individual values in the cell range (A1:C3) are multiplied by a factor of 10.

བསྒྱུར་རྩིས་ཕུད་འདྲེན་སྤྱོད་ས་ཁོངས་ནང་ད་དུང་རྩིས་རྒྱག་རྟགས་གཞན་བེད་སྤྱད་ཆོག་(ལིང་ཚེ་)LibreOffice གློག་རྡུལ་རེའུ་མིག་ནང་སྡོམས་ (+) འཐེན་ (-) བསྒྱུར་ (*) བགོས་ (/) རང་སྒྱུར་ (^) ཡིག་རྟགས་འབྲེལ་མཐུད་ (&) དང་གཤིབ་སྡུར་(=、<>、<、>、<=、>=)སོགས་བརྟེན་ཆོག གལ་སྲིད་ལིང་ཚེ་སྤྱི་འགྲོས་ནང་འཇུག་བྱས་ཟིན་ན་རྩིས་རྒྱག་རྟགས་འདི་དག་ད་དུང་དྲ་མིག་ས་ཁོངས་ནང་གི་གྲངས་ཐང་རེ་རེར་སྤྱད་ཆོག་པ་དང་ལིང་ཚེའི་རྣམ་པ་འབྲས་བུར་ཕྱིར་ལོག

ལིང་ཚེ་སྤྱི་འགྲོས་ནང་གཤིབ་སྡུར་རྩིས་རྒྱག་རྟགས་བསྒྱུར་བཅོས་བྱེད་པའི་སྐབས་ དྲ་མིག་སྟོང་པ་ཡིས་རྐྱང་པའི་གཤིབ་སྡུར་དང་མཚུངས་པའི་སྒྲིག་སྲོལ་ལག་བསྟར་བྱེད་པ་སྟེ་དེ་ནི་ 0 ཡིན་ཆོག་ལ་ ཡི་གེའི་ཕྲེང་བ་སྟོང་པ་ཞིག་ཀྱང་ཡིན་ཆོག གལ་སྲིད་ A1 དང་ A2 ནི་དྲ་མིག་སྟོང་པའི་ཡིན་ན་ལིང་ཚེ་སྤྱི་འགྲོས་ {=A1:A2=""} དང་ {=A1:A2=0} ཚང་མ་ TRUEལ་ཕྱིར་ལོག

ག་དུས་ལིང་ཚེ་སྤྱི་འགྲོས་སྤྱོད་དགོས་སམ་

མི་འདྲ་བའི་གྲངས་ཐང་ལ་བསྐྱར་སྐོར་དུ་གཅིག་མཚུངས་ཀྱི་རྩིས་རྒྱག་ལག་བསྟར་བྱ་དགོས་ཚེ ་ལིང་ཚེ་སྤྱི་འགྲོས་སྤྱད་ནས་སྟབས་བདེ་མི་ཉུང་བ་ཞིག་འབྱུང་སྲིད། གལ་སྲིད་རྗེས་སུ་རྩིས་རྒྱག་ཐབས་བསྒྱུར་དགོས་ན་ལིང་ཚེ་སྤྱི་འགྲོས་གཅིག་དུ་་བརྗེས་ན་འགྲིག་ལིང་ཚེ་སྤྱི་འགྲོས་གང་རུང་ཁ་སྣོན་བྱ་དགོས་ཚེ་ལིང་ཚེའི་ཁྱབ་ཁོངས་ཆ་ཚང་བདམས་ནས་ལིང་ཚེ་སྤྱི་འགྲོས་ལ་དགོས་ངེས་ཀྱི་བཟོ་བཅོས་བྱས་པ

ལིང་ཚེ་སྤྱི་འགྲོས་ཀྱིས་ནང་ས་ཆེན་པོ་མི་ཟིན་པས་གྲངས་ཐང་མང་པོ་བརྩིས་དགོས་པའི་སྐབས་ལིང་ཚེ་སྤྱི་འགྲོས་སྤྱད་ན་ད་དུང་བར་མཐོང་ལ་གྲོན་ཆུང་ཐུབ་ གཞན་ཡང་རྩིས་རྒྱག་ཁྲོད་ད་དུང་ས་ཁོངས་མང་པོ་འདུས་ཐུབ་པས་ཪྙོག་འཛིན་རྩིས་རྒྱག་ལག་བསྟར་བྱེད་པའི་སྐབས་ལིང་ཚེ་སྤྱི་འགྲོས་ནི་ཧ་ཅང་གལ་ཆེའི་ཡོ་བྱད་གཅིག་ཀྱང་ཡིན།LibreOffice མི་དྲ་བའི་ལིང་ཚེ་གྲངས་རིག་པའི་རྟེན་གྲངས་མཁོ་འདོན་བྱས་ཡོད་པ་དཔེར་ན་ལིང་ཚེ་གཉིས་བསྒྱུར་བའི་ MMULT རྟེན་གྲངས་ལ་སྤྱོད་པ་དང་ལིང་ཚེའི་ཕྱོགས་མེད་ཚད་གཉིས་ཀྱི་བསྒྱུར་ཐོབ་རྩིས་རྒྱག་པར་སྤྱོད་པའི་རྟེན་གྲངས་ SUMPRODUCT ལྟ་བུའོ།

LibreOffice གློག་རྡུལ་རེའུ་མིག་ནང་གི་ལིང་ཚེ་སྤྱི་འགྲོས་སྤྱོད་པ།

"སྤྱིར་བཏང་།"སྤྱི་འགྲོས་གསར་དུ་འཛུགས་ཆོག་ དེའི་ནང་གི་འདྲེན་སྤྱོད་ས་ཁོངས་(དཔེར་ན་ཞུགས་གྲངས་)ཀྱིས་ལིང་ཚེ་སྤྱི་འགྲོས་ཤིག་མཚོན། འབྲས་བུ་ནི་འདྲིན་སྤྱོད་ས་ཁོངས་ལ་གཞིག་ས་ནས་སྤྱོ་འགྲོས་གནས་སའི་ཕྲེང་ངམ་སྟར་པའི་སྣོན་པ་ལས་ཐོབ། གལ་སྲིད་སྣོན་མེད་པའམ་སྣོན་པའི་ས་ཁོངས་ལ་ཕྲེང་ངམ་སྟར་པ་མང་པོ་ལྡན་ཡོད་པ་ནོར་འཁྲུལ་གྱི་ཆ་འཕྲིན་ "#value!"མངོན། གཤམ་དུ་ཞིབ་ཕྲའི་དཔེ་གཞི་ནས་གསལ་བཤད་རྒྱུ་ཡིན་:

ལིང་ཚེ་སྤྱི་འགྲོས་གསར་འཛུགས།

གལ་སྲིད་རྟེན་གྲངས་སྣེ་སྟོན།སྤྱད་ནས་ལིང་ཚེ་སྤྱི་འགྲོས་གསར་དུ་འཛུགས་དགོས་ཚེ་ ངེས་པར་དུ་རྟག་ཏུ་ལིང་ཚེ་བསྐྱར་འདེམས་སྒྲོམ་བདམས་ནས་འབྲས་བུ་ལིང་ཚེའི་ནང་ཕྱིར་ལོག་དགོས། དེ་ལས་ལྡོག་ནས་ལིང་ཚེའི་སྟེང་གི་དྲ་མིག་གི་གྲངས་ཐང་རྩིས་རྒྱག་ཕྱིར་ལོག་པ་ཙམ་ཡིན།

If you enter the array formula directly into the cell, you must use the key combination Shift + + Enter instead of the Enter key. Only then does the formula become an array formula.

ཟུར་མཆན་རིས་རྟགས་

LibreOffice གློག་རྡུལ་རེའུ་མིག་ནང་ ལིང་ཚེ་སྤྱི་འགྲོས་གོང་འོག་ཏུ་གུག་ཆེན་སྣོན་དགོས། ལག་འགུལ་གྱིས་གུག་ཆེན་ནང་འཇུག་བརྒྱུད་ལིང་ཚེ་སྤྱི་འགྲོས་འཛུགས་མི་ཐུབ།


ཐ་ཚིག་རིས་རྟགས་

འབྲས་བུའི་ལིང་ཚེ་ཡིས་དྲ་མིག་ལ་རང་འགུལ་གྱིས་སྲུང་སྐྱོབ་བྱེད་པས་དེ་ལ་བསྒྱུར་བཅོས་བྱ་ཐབས་མེད། འོན་ཀྱང་ལིང་ཚེ་དྲ་མིག་ས་ཁོངས་ཁྱབ་ཁོངས་ཡོངས་བདམས་ན་ལིང་ཚེ་སྤྱོ་འགྲོས་ལ་རྩོམ་སྒྲིག་དང་འདྲ་ཕབ་བྱས་ཆོག


Using Inline Array Constants in Formulas

Calc supports inline matrix/array constants in formulas. An inline array is surrounded by curly braces '{' and '}'. Elements can be each a number (including negatives), a logical constant (TRUE, FALSE), or a literal string. Non-constant expressions are not allowed. Arrays can be entered with one or more rows, and one or more columns. All rows must consist of the same number of elements, all columns must consist of the same number of elements.

The column separator (separating elements in one row) and the row separator are language and locale dependent. But in this help content, the ';' semicolon and '|' pipe symbol are used to indicate the column and row separators, respectively. For example, in the English locale, the ',' comma is used as the column separator, while the ';' semicolon is used as the row separator.

དྲན་བརྡའི་རིས་རྟགས་

You can view and change the row and column separator in - Calc - Formula - Separators.


Arrays can not be nested.

དཔེ་གཞི།

={1;2;3}

An array with one row consisting of the three numbers 1, 2, and 3.

To enter this array constant, you select three cells in a row, then you type the formula ={1;2;3} using the curly braces and the semicolons, then press + Shift + Enter.

={1;2;3|4;5;6}

An array with two rows and three values in each row.

={0;1;2|FALSE;TRUE;"two"}

A mixed data array.

=SIN({1;2;3})

Entered as a matrix formula, delivers the result of three SIN calculations with the arguments 1, 2, and 3.

ལིང་ཚེ་སྤྱི་འགྲོས་རྩོམ་སྒྲིག

  1. Select the cell range or array containing the array formula. To select the whole array, position the cell cursor inside the array range, then press + /, where / is the Division key on the numeric keypad.

  2. Either press F2 or position the cursor in the input line. Both of these actions let you edit the formula.

  3. After you have made changes, press + Shift + Enter.

དྲན་བརྡའི་རིས་རྟགས་

ལིང་ཚེའི་ཆ་ཤས་ཁག་གི་རྣམ་གཞག་བཀོད་སྒྲིག་བྱས་ཆོག དཔེར་ན་ཡིག་གཟུགས་ཚོས་གཞི་བསྒྱུར་བ་ལྟ་བུའོ། དྲ་མིག་ས་ཁོངས་ཁོ་ན་བདམས་རྗེས་དགོས་པར་དམིགས་ནས་དེའི་གཏོགས་གཤིས་བཅོས་པ་ཙམ་གྱིས་ཆོག


ལིང་ཚེ་སྤྱི་འགྲོས་འདྲ་ཕབ་བྱས།

  1. ལིང་ཚེ་སྤྱི་འགྲོས་ཚུད་པའི་དྲ་མིག་ས་ཁོངས་སོགས་ལིང་ཚེ་བདམས་དགོས།

  2. Either press F2 or position the cursor in the input line.

  3. Copy the formula into the input line by pressing + C.

  4. Select a range of cells where you want to insert the array formula and either press F2 or position the cursor in the input line.

  5. Paste the formula by pressing + V in the selected space and confirm it by pressing + Shift + Enter. The selected range now contains the array formula.

ལིང་ཚེ་ས་ཁོངས་ལེགས་སྒྲིག

གལ་སྲིད་ཕྱིར་བཏོན་ལིང་ཚི་རྩོམ་སྒྲིག་བྱ་དགོས་ན་ གཤམ་གྱི་བཀོལ་སྤྱོད་ལག་བསྟར་བྱ་དགོས།

  1. ལིང་ཚེ་སྤྱི་འགྲོས་ཚུད་པའི་དྲ་མིག་ས་ཁོངས་སོགས་ལིང་ཚེ་བདམས་དགོས།

  2. འདེམས་ངེས་ས་ཁོངས་ཀྱི་གཡོན་འོག་ཏུ་རིས་རྟགས་ཆུང་ངུ་ཞིག་མངོན་ ཙིག་རྟགས་སྤྱད་ནས་རིས་རྟགས་དེར་རྐྱང་རྡེབ་བྱས་ནས་ས་ཁོངས་དེ་བསྐུམ་པའམ་རྒྱ་སྐྱེད་ཐུབ།

ཟུར་མཆན་རིས་རྟགས་

ལིང་ཚེ་ས་ཁོངས་ལེགས་སྒྲིག་སྐབས་རང་འགུལ་གྱིས་ལིང་ཚེ་སྤྱི་འགྲོས་ལེགས་སྒྲིག་མི་བྱ། འབྲས་བུའི་ས་ཁོངས་མངོན་པ་ཙམ་ལ་བསྒྱུར་བཅོས་བྱས་པའོ།


By holding down the key, you can create a copy of the array formula in the given range.

ཆ་རྐྱེན་ཡོད་པའི་ལིང་ཚེ་རྩིས་རྒྱག

ཆ་རྐྱེན་ཡོད་པའི་ལིང་ཚེ་རྩིས་རྒྱག་ནི་ IF() ངམ་ CHOOSE() རྟེན་གྲངས་ཚུད་པའི་ལིང་ཚེ་སྤྱི་འགྲོས་ཡིན། སྤྱི་འགྲོསནང་གི་ཆ་རྐྱེན་འགྱུར་ཚད་ནི་ས་ཁོངས་འདྲེན་སྤྱོད་དམ་ལིང་ཚེའི་འབྲས་བུ་ཡིན།

གཤམ་གྱི་དཔེ་གཞིའི་ནང་ {=IF(A1:A3>0;"yes";"no")} སྤྱི་འགྲོས་ཀྱི་>0 ཚོད་ལྟ་ནི་ A1:A3 ས་ཁོངས་ཀྱི་དྲ་མིག་རེ་རེར་ཉེར་སྤྱོད་ཐུབ་ འབྲས་བུ་ནི་ལྟོས་བཅས་ཀྱི་དྲ་མིག་ནང་འདྲ་ཕབ་དགོས།

A

B(སྤྱི་འགྲོས་)

B(འབྲས་བུ་)

1

1

{=IF(A1:A3>0;"yes";"no")}

ཡིན།

2

0

{=IF(A1:A3>0;"yes";"no")}

མིན།

3

1

{=IF(A1:A3>0;"yes";"no")}

ཡིན།


གཤམ་གྱི་རྟེན་གྲངས་ཀྱི་བཙན་ཐབས་ཀྱི་ལིང་ཚེ་ལས་སྣོན་ལ་རོགས་བསྐྱོར་བྱེད་པ་སྟེ་:CORREL、COVAR、FORECAST、FTEST、INTERCEPT、MDETERM、MINVERSE、MMULT、MODE、PEARSON、PROB、RSQ、SLOPE、STEYX、SUMPRODUCT、SUMX2MY2、SUMX2PY2、SUMXMY2、TTEST གལ་སྲིད་གོང་ནི་ནང་ནས་རྟེན་གྲངས་ཤིག་འཐེན་སྤྱོད་བྱ་བའི་སྐབས་ས་ཁོངས་འདྲེན་སྤྱོད་ཉིད་ཞུགས་གྲངས་སུ་བཞག་ན་རྟེན་གྲངས་འདི་དག་གྱི་བྱ་འགུལ་ནི་ལིང་ཚེའི་རྟེན་གྲངས་དང་གཅིག་མཚུངས། གཤམ་གྱི་རེའུ་མིག་གིས་བཙན་ཐབས་ཀྱི་ལིང་ཚེ་ལས་སྣོན་གྱི་དཔེ་གཞི་མཁོ་འདོན་བྱས་པ་སྟེ་:

A

B(སྤྱི་འགྲོས་)

B(འབྲས་བུ་)

C(བཙན་ཐབས་ཀྱི་ལིང་ཚེ་སྤྱི་འགྲོས་)

C(འབྲས་བུ་)

1

1

=A1:A2+1

2

=SUMPRODUCT(A1:A2+1)

5

2

2

=A1:A2+1

3

=SUMPRODUCT(A1:A2+1)

5

3

=A1:A2+1

#VALUE

=SUMPRODUCT(A1:A2+1)

5


FREQUENCY

Indicates the frequency distribution in a one-column-array. The function counts the number of values in the Data array that are within the values given by the Classes array.

Syntax

FREQUENCY(Data; Classes)

Data རྩིས་རྒྱག་དགོས་པའི་ཐང་ཚོའི་ལིངཚེའམ་དེ་ཡི་འདྲེན་སྤྱོད་མཚོན།

རིགས་ཀྱི་རིགས་དབྱེའི་ལིང་ཚེ་མཚོན།

ཟུར་མཆན་རིས་རྟགས་

ཁྱེད་ནས་ཤོག་ལྷེ་འདིའི་འགོ་ཐོད་དུ་ལིང་ཚེ་རྟེན་གྲངས་ཀྱི་སྤྱིར་བཏང་རང་བཞིན་གྱི་ངོ་སྤྲོད་མཐོང་ཐུབ།


Example

གཤམ་གྱི་རེའུ་མིག་ནང་ སྟར་ A ནང་རིམ་སྒྲིག་མེད་པའི་ཚད་འཇལ་ཐང་མངོན་པ། སྟར་པ་B ནང་ནང་འཇུག་གི་རིགས་དབྱེའི་ཐང་ཆེ་ཤོས་ཚུད་པ་ སྟར་པ་ A ནང་གི་གཞི་གྲངས་སོ་སོར་སྤྱོད། B1 ནང་གི་མུ་མཐའ་ཐང་ནི་ཡིན་པས་རྟེན་གྲངས་ FREQUENCY ཕྱིར་ལོག་པའི་འཇལ་ཚད་ཐང་གི་ཁ་གྲངས་ནི་ 5ལས་ཆེ་བའམ་མཚུངས་པ་ཡིན། B2 མུ་མཐའ་ཐང་ནི་ 10ཡིན་ རྐྱེན་པས་རྟེན་གྲངས་ FREQUENCY ཕྱིར་ལོག་པའི་འཇལ་ཚད་ཐང་གཉིས་ཀྱི་ཁ་གྲངས་ནི་5ལས་ཆེ་བའམ་10མཚུངས། B6ནང་ནང་འཇུག་གི་ཡིག་དེབ་">25" སྤྱད་གཞི་ཁོ་ནར་བཏོན།

A

B

C

1

12

5

1

2

8

10

3

3

24

15

2

4

11

20

3

5

5

25

1

6

20

>25

1

7

16

8

9

9

7

10

16

11

33


སྟར་རྐྱང་པའི་ཁྱབ་ཁོངས་བདམས་ནས་གྲངས་ཐང་དེ་རིགས་འབྱེད་མང་ཤོས་ཀྱིས་ཟློས་ཕྱོད་གྲངས་མངོན་པར་སྤྱད་དགོས། དྲ་མིག་བདམས་པའི་སྐབས་ ངེས་པར་དུ་རིགས་འབྱེད་གྲངས་ལས་ཡིག་དུམ་འཐོལ་པ་ཞིག་བདམས་དགོས། དཔེ་གཞི་འདིའི་ནང་བདམས་པ་ནི་ C1:C6ཁྱབ་ཁོངས་ཡིན།རྟེན་གྲངས་སྣེ་སྟོན།ནང་རྟེན་གྲངས་ FREQUENCY ཁོལ་སྤྱོད་བྱེད་ (A1:A11) ནང་གི་ Data ཚད་ངེས་ས་ཁོངས་བདམ་པ་དང་སླར་ Classes སྟར་པ་འདེམས་དགོས་པ་དང་དེ་ཁྲོད་དུ་རིགས་འབྱེད་ཚད་འཛིན་ཐང་ (B1:B6)ནང་འཇུག་བྱ་དགོས།ལིང་ཚེའི་བསྐྱར་འདེམས་སྒྲོམ་བདམ་རྗེས་"གཏན་འཁེལ་"ལ་རྐྱང་རྡེབ་བྱེད། ཡུད་ཙམ་ནས་ད་གིན་བདམས་པའི་ས་ཁོངས་ C1:C6 ནང་ཟློས་ཕྱོད་ཁྱབ་ཚུལ་མཐོང་ཐུབ།

More explanations on top of this page.

GROWTH

ལིང་ཚེའི་ནང་སྟོན་གྲངས་ཕྱིར་ལོག་ཚེག་རྩིས་རྒྱག་པ།

Syntax

Growth(Data_Y;Data_X; New_Data_X; Function_type)

Data_Y Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

Data_X(འདེམས་རུང་)Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

New_Data_X(འདེམས་རུང་)ཐང་བསྐྱར་དུ་རྩིས་རྒྱག་པའི་ X གཞི་གྲངས་ལིང་ཚེ་མཚོན།

FunctionType (optional). If FunctionType = 0, functions in the form y = m^x will be calculated. Otherwise, y = b*m^x functions will be calculated.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

Example

This function returns an array and is handled in the same way as the other array functions. Select a range where you want the answers to appear and select the function. Select DataY. Enter any other parameters, mark Array and click OK.

LINEST

ཐིག་གཤིས་ཕྱིར་ལོག་འདྲ་སྦྱོར་གྱི་ཞུགས་གྲངས་ཕྱིར་ལོག་པ།

Syntax

LINEST(Data_Y; Data_X; Linear_Type; Stats)

Data_Y Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

Data_X(འདེམས་རུང་)X གཞི་གྲངས་ལིང་ཚེ་མཚོན།

LINEST finds a straight line y = a + bx that best fits the data, using linear regression (the "least squares" method). With more than one set of variables the straight line is of the form y = a + b1x1 + b2x2 ... + bnxn.

If linearType is FALSE the straight line found is forced to pass through the origin (the constant a is zero; y = bx). If omitted, linearType defaults to TRUE (the line is not forced through the origin).

If stats is omitted or FALSE only the top line of the statistics table is returned. If TRUE the entire table is returned.

LINEST returns a table (array) of statistics as below and must be entered as an array formula (for example by using + Shift + Return rather than just Return).

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

Example

རྟེན་གྲངས་འདིས་ལིང་ཚེ་ཞིག་ཕྱིར་ལོག་པ་ དེའི་ལས་སྣོན་བྱ་ཐབས་ནི་ལིང་ཚེ་གཞན་གྱི་རྟེན་གྲངས་དང་གཅིག་མཚུངས་ཡིན། སྔོན་ལ་འབྲས་བུ་མངོན་པའི་ས་ཁོངས་ཤིག་བདམས་པ་དང་དེ་རྗེས་རྟེན་གྲངས་འདི་ཉིད་འདེམས་དགོས། Data_Y བདམས་པ་དང་དགོས་པར་དམིགས་ནས་གཞན་ནང་འཇུག་བྱ་དགོས།ལིང་ཚེ་བདམས་རྗེས་"གཏན་འཁེལ།"ལ་རྐྱང་རྡེབ་བྱ་དགོས་

གལ་སྲིད་ stats = 0ཡིན་ན་མ་ལག་གིས་ཉུང་མཐར་ཡང་ཕྱིར་ལོག་ཐིག་གི་གསེག་ཕྱོད་དང་དེ་དང་ Y མདའ་ཡི་སྣོལ་ཁ་ཕྱིར་ལོག གལ་སྲིད་ Stats མི་མཚུངས་ 0ན་ད་དུང་འབྲས་བུ་གཞན་མངོན་ནོ།

LINEST གཞན་གི་འབྲས་བུ།

གཤམ་གྱི་དཔེ་གཞི་གཟིགས།

A

B

C

D

E

F

G

1

x1

x2

y

Eva

2

4

7

100

4,17

-3,48

82,33

3

5

9

105

5,46

10,96

9,35

4

6

11

104

0,87

5,06

#NA

5

7

12

108

13,21

4

#NA

6

8

15

111

675,45

102,26

#NA

7

9

17

120

8

10

19

133


སྟར་པ་ A ནང་ X1 ཐང་དུ་མ་ཚུད་པ་དང་ སྟར་པ་ B ནང་ X2 ཐང་དུ་མ་ཚུད་སྟང་པ་ C ཐང་དུ་མ་ཚུད་ སྟར་པ་Y ཐང་དུ་མ་ཚུད། སྔོན་ལ་གྲངས་ཐང་འདི་དག་ལས་དེབ་ནང་ནང་འཇུག་བྱས་རྗེས་ལས་དེབ་ནང་ E2:G6 བཀོད་སྒྲིག་དང་སྦྲགས་རྟེན་གྲངས་སྣེ་སྟོན།གསོན་སློང་བྱ་དགོས་ LINEST རྟེན་གྲངས་སྤྱོད་དགོས་པ་ ཆེས་ངེས་པར་དུ་རྟེན་གྲངས་སྣེ་སྟོན།ནང་ལེང་ཚེའི་བསྐྱར་འདེམས་སྒྲོམ་བདམས་བདམས་རྗེས་ ལས་དེབ་ནང་གཤམ་གྱི་གཞི་གྲངས་བདམས་ངའམ་མཐེབ་གཞོང་བརྒྱུད་ནང་འཇུག་བྱ་དགོས་སྟེ་:

Data_Y ནི་ C2:C8

Data_X ནི་ A2:B8

Linear_Type དང་ Stats ཚང་མ་ 1ལ་བཀོད་སྒྲིག་བྱེད།

"གཏན་འཁེལ།"ལ་རྐྱང་རྡེབ་བྱས་པས་ LibreOffice གློག་རྡུལ་རེའུ་མིག་གིས་ LINEST ཐང་སྤྱད་ནས་གོང་བཤད་དཔེ་གཞི་སྐོང་བ་ནི་དཔེ་གཞི་དེའི་ནང་སྟོན་པ་བཞིན་ནོ།

The formula in the Formula bar corresponds to each cell of the LINEST array {=LINEST(C2:C8;A2:B8;1;1)}.

གཤམ་ནི་ LINEST ལས་རྩིས་རྒྱག་ཀྱི་འབྲས་བུ་ནི་གསལ་བཤད་ཡིན་:

E2 དང་ F2: x1 དང་ x2 གི་ཐང་ལ་གཞིགས་ནས་ཕྱིར་ལོག་ཐིག་ y=b+m*x ཡི་གསེག་ཕྱོད་ m ལྟོག་པའི་གོ་རིམ་ནས་འབྲས་བུ་སྤྲོད་པ་སྟེ་ E2 ནང་ x2 ཀྱི་གསེག་ཕྱོད་དང་ F2 ནང་ x1 གི་གསེག་ཕྱོད་སྤྲོད་པའོ།

G2:དང་ y མདའ་ཡི་སྣོལ་ b

E3 དང་ F3:གསེག་ཕྱོད་ཐང་གི་ཚད་གཞིའི་བར་ཁྱད།

G3:ཚད་གཞིའི་ནོར་ཁྱད།

E4:RSQ

F4:ཉེར་སྤྱོད་ཕྱིར་ལོག་ཐབས་ཀྱི་བརྩིས་པའི་ y ཐང་ཚད་གཞིའི་བར་ཁྱད།

E5:ཁྱད་སྒྱུར་ནང་རྩིས་རྒྱག་ཏེ་ F ཐང་ཐོབ་པ།

F5:ཁྱད་སྒྱུར་དབྱེ་ཞིབ་ནང་ནས་རང་ཡོད་ཚད་ཐོབ་པ།

E6:yཆོད་རྩིས་ཐང་དང་དེའི་ཨང་རྩིས་ཆ་སྙོམས་ཐང་གི་སྙོམས་པའི་ཉིས་སྒྱུར་ཁྱད་སྡོམས།

F6:y ཆོད་རྩིས་ཐང་དང་སྤྲོད་ངེས་པའི་ y ཐང་གི་སྙོམས་པའི་ཉིས་སྒྱུར་ཁྱད་སྡོམས།

More explanations on top of this page.

LOGEST

རྟེན་གྲངས་འདི་སྟོན་གྲངས་ཕྱིར་ལོག་འཁྱོག་ཐིག་ (y=b*m^x) ལྟར་ནང་འཇུག་གཞི་གྲངས་ཀྱི་ཉིས་སྒྱུར་ཁྱད་རྩིས་རྒྱག་པའོ།

Syntax

LOGEST(Data_Y; Data_X; Function_Type; Stats)

Data_Y Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

Data_X(འདེམས་རུང་)Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

Function_Type(འདེམས་རུང་)གལ་སྲིད་ Function_Type = 0 སྤྱི་བགྲོས་ y = m^x ལྟར་རྩིས་རྒྱག་དགོས་ ལྟོག་ན་ y = b*m^x ལྟར་རྩིས་རྒྱག་དགོས།

Stats(འདེམས་རུང་) གལ་སྲིད་ stats=0 ཕྱིར་ལོག་བཏགས་གྲངས་ཁོ་ན་རྩིས་རྒྱག་དགོས།

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

Example

LINEST ལ་གཟིགས། འོན་ཀྱང་དེ་ཉིས་སྒྱུར་སྡོམས་ཕྱིར་ལོག་མི་བྱ།

MDETERM

ལིང་ཚེ་ཕྲེང་སྟར་ཚུལ་གྱི་ཐང་ཕྱིང་ལོག རྟེན་གྲངས་འདི་མིག་སྔའི་དྲ་མིག་ནང་ཐང་ཞིག་ཕྱིར་ལོག་པ་དེར་བརྟེན་རྩིས་རྒྱག་འབྲས་བུར་ས་ཁོངས་ཤིག་མཚན་འཇོག་བྱེད་པའི་དགོས་པ་མེད་

Syntax

MDETERM(array)

Arrayདེའི་ཕྲེང་དང་སྟར་པའི་ཚུལ་ཐང་གཏན་འཁེལ་དགོས་པའི་ལིང་ཚེ་གྲུ་བཞི་ཞིག་མཚོན།

ཟུར་མཆན་རིས་རྟགས་

You can find a general introduction to using Array functions on top of this page.


More explanations on top of this page.

MINVERSE

ཟློག་པའི་ལིང་ཚེ་ཕྱིར་ལོག་པ།˜µ

Syntax

MINVERSE(array)

Array ཟློག་པའི་ལིང་ཚེ་ཡི་གྲུ་བཞི་ལིང་ཚེ་རྩེས་རྒྱག་དགོས་པ་མཚོན།

More explanations on top of this page.

Example

གྲུ་བཞི་ཁ་གང་མའི་ས་ཁོངས་ཤིག་བདམས་ནས་ MINVERSEའདེམས། དགོས་ཕྱིར་བཏོན་པའི་ལིང་ཚེ་བདམས་ནས་ལིང་ཚེཚིག་དུམ་འདེམས་པ་དང་"གཏན་འཁེལ་"རྐྱང་རྡེབ་བྱེད།

MMULT

ལིང་ཚི་གཉིས་ཀྱི་བསྒྱུར་ཐོབ་རྩིས་རྒྱག་དགོས།ལིང་ཚི་ 1 སྟར་གྲངས་ངེས་པར་དུ་ལིང་ཚི་ 2 ཕྲེང་གྲངས་དང་མཚུངས་དགོས་ ལིང་ཚི་གྲུ་བཞིར་སྟར་ཕྲེང་གྲངས་ཚང་མ་ངེས་པར་དུ་མཚུངས་དགོས།

Syntax

MMULT(array; array)

གནས་ས་དང་པོའི་ལིང་ཚེ་ཡིས་ལིང་ཚེའི་བསྒྱུར་ཐོབ་ཀྱི་ལིང་ཚེ་དང་པོ་རྩིས་རྒྱག་པར་སྤྱོད་པ་མཚོན་པ།

གནས་གཉིས་པའི་ Array ཕྲེང་གྲངས་གཅིག་མཚུངས་ཀྱི་ལིང་ཚེ་གཉིས་པ་མཚོན།

ཟུར་མཆན་རིས་རྟགས་

More explanations on top of this page.


Example

གྲུ་བཞི་ཁ་གང་མའི་ཁྱབ་ཁོངས་ཤིག་བདམས། རྟེན་གྲངས་ MMULT བདམས།ལིང་ཚེ་དང་པོ་དེ་བདམས་ནས་དེ་རྗེས་ལིང་ཚེ་གཉིས་པ་དེ་བདམས་ རྟེན་གྲངས་སྣེ་སྟོན།སྤྱད་ནས་ལིང་ཚེའི་བསྐྱར་འདེམས་སྒྲོམ་བདམས་དགོས།"གཏན་འཁེལ།"ལ་རྐྱང་རྡེབ་བྱེད། ཕྱིར་བཏོན་ལིང་ཚེ་ནི་འདེམས་ངེས་ཀྱི་ཁྱབ་ཁོངས་དང་པོའི་ནང་མངོན།

MUNIT

སྤྲོད་ངེས་ཀྱི་ཡིག་ཕྲེང་དང་སྟར་པའི་གྲངས་ཀྱི་སྡེ་ཚན་ལིང་ཚེ་ཕྱིར་ལོག་པ། སྡེ་ཚན་ལིང་ཚེ་ནི་གཏད་ཟུར་ཐིག་གཙོ་བོ་ཚང་མ་1དང་མཚུངས་ ལིང་ཚེའི་གཞི་རྒྱུ་གཞན་རྣམས་ཚང་མ་ 0 ཡི་ལིང་ཚེ་གྲུ་བཞི་དང་མཚུངས།

Syntax

MUNIT(Dimensions)

རྩ་གྲངས་ནི་སྡེ་ཚན་ལིང་ཚེའི་ཆེ་ཆུང་ལ་བརྗོད།

ཟུར་མཆན་རིས་རྟགས་

ཁྱེད་ནས་ཤོག་ལྷེ་འདིའི་འགོ་ཐོད་དུ་ལིང་ཚེ་རྟེན་གྲངས་ཀྱི་སྤྱིར་བཏང་རང་བཞིན་གྱི་ངོ་སྤྲོད་མཐོང་ཐུབ།


Example

ལས་དེབ་ནང་གྲུ་བཞི་ཁ་གང་མའི་ས་ཁོངས་ཤིག་བདམས་པ་དཔེར་ན་ A1 ནས་ E5ལྟ་བུའོ།

བདམས་ངའི་ས་ཁོངས་མི་དོར་བའི་གནས་ཚུལ་འོག་རྟེན་གྲངས་ MUNIT བདམས་པ་དང་ལིང་ཚེ་བསྐྱར་འདེམས་སྒྲོམ་བདམས་རྗེས་དགོས་ངེས་ཀྱི་སྡེ་ཚན་ལིང་ཚེ་རྩ་གྲངས་(དཔེ་གཞི་འདིའི་ནང་ 5ཡིན་)ནང་འཇུག་དང་"གཏན་འཁེལ་ལ་"རྐྱང་རྡེབ་བྱེད།

You can also enter the =MUNIT(5) formula in the last cell of the selected range (E5), and press .

སྐབས་འདིར་སྡེ་ཚན་ལིང་ཚེ་ཞིག་མངོན་ ས་ཁོངས་ནི་ A1:E5ཡིན།

More explanations on top of this page.

SUMPRODUCT

སྤྲོད་ངེས་པའི་ལིང་ཚེའི་ནང་ལྟོས་ཟླའི་གཞི་རྒྱུ་ཕན་ཚུན་བསྒྱུར་བ་དང་ དེ་རྗེས་བསྒྱུར་ཐོབ་ཕན་ཚུན་སྡོམས་དགོས།

Syntax

SUMPRODUCT(Array1; Array2; ...; Array30)

Array1, Array2; ...; Array30 represent arrays whose corresponding elements are to be multiplied.

ཉུང་མཐར་ཡང་ལིང་ཚེ་གཅིག་ངེས་པར་དུ་ཞུགས་གྲངས་རེའུ་འགོད་ཀྱི་ཆ་ཤས་ཡིན་དགོས། གལ་སྲིད་ལིང་ཚེ་གཅིག་རང་སྤྲོད་རྒྱུད་ཐག་ཆོད་ན་ ལིང་ཚེའི་གཞི་རྒྱུ་ཡོད་ཚད་ལ་སྡོམས་འཚོལ་དགོས།

Example

A

B

C

D

1

2

3

4

5

2

6

7

8

9

3

10

11

12

13


=SUMPRODUCT(A1:B3;C1:D3) ཕྱིར་ལོག་ 397

རྩིས་རྒྱག་དགོས་:A1*C1 + B1*D1 + A2*C2 + B2*D2 + A3*C3 + B3*D3

SUMPRODUCT སྤྱད་ནས་ཕྱོགས་ཚད་གཉིས་ཀྱི་ཕྱོགས་མེད་དངོས་ལུགས་ཀྱི་གྲངས་ཚད་གཉིས་ཀྱི་བསྒྱུར་ཐོབ་རྩིས་རྒྱག་དགོས།

ཟུར་མཆན་རིས་རྟགས་

SUMPRODUCT གྲངས་ཤིག་ཕྱིར་ལོག་ ལིང་ཚེ་རྟེན་གྲངས་སུ་བརྩིས་པའི་རྟེན་གྲངས་ནང་འཇུག་བྱ་མི་དགོས།


More explanations on top of this page.

SUMX2MY2

ལེང་ཚེ་གཉིས་ནང་ལྟོས་ཟླའི་ཐང་གི་རང་ཉིད་སྒྱུར་ཁྱད་ཀྱི་སྡོམས་ཕྱིར་ལོག་པ།

Syntax

SUMX2MY2(array X; array Y)

Array X གཞི་རྒྱུས་ཉིས་སྒྱུར་སྡོམས་འཚོལ་བའི་ལེང་ཚེ་དང་པོ་མཚོན།

Array Y གཞི་རྒྱུས་ཉིས་སྒྱུར་སྡོམས་འཚོལ་བའི་ལེང་ཚེ་གཉིས་པ་མཚོན།

More explanations on top of this page.

SUMX2PY2

ལེང་ཚེ་གཉིས་ནང་ལྟོས་ཟླའི་ཐང་གི་རང་ཉིད་སྒྱུར་ཁྱད་ཀྱི་སྤྱི་སྡོམས་ཕྱིར་ལོག་པ།

Syntax

SUMX2PY2(Array X; Array Y)

Array X གཞི་རྒྱུས་ཉིས་སྒྱུར་སྡོམས་འཚོལ་བའི་ལེང་ཚེ་དང་པོ་མཚོན།

Array Y གཞི་རྒྱུས་ཉིས་སྒྱུར་སྡོམས་འཚོལ་བའི་ལེང་ཚེ་གཉིས་པ་མཚོན།

More explanations on top of this page.

SUMXMY2

ལིང་ཚེ་གཉིས་ནང་ལྟོས་ཟླའི་ཐང་གི་མཐེབ་ཐོབ་ཀྱི་ཉིས་སྒྱུར་ཐང་ཕན་ཚུན་ཐོབ།

Syntax

SUMXMY2(Array X; Array Y)

Array X གཞི་རྒྱུ་ཕན་ཚུན་འཐེན་པ་དང་་ཉིས་སྒྱུར་རྒྱུའི་ལིང་ཚེ་དང་པོ་མཚོན།

Array Y གཞི་རྒྱུ་ཕན་ཚུན་འཐེན་པ་དང་ཉིས་སྒྱུར་རྒྱུའི་ལིང་ཚེ་གཉིས་པ་མཚོན།

More explanations on top of this page.

TRANSPOSE

ལིང་ཚེའི་ཡིག་ཕྲེང་དང་སྟར་པའི་གནས་སྐོར་བ།

Syntax

TRANSPOSE(array)

ལིང་ཚེ་གྱི་ལས་དེབ་ནང་གནས་འགྱུར་དགོས་རྒྱུའི་ལིང་ཚེ་མཚོན།

ཟུར་མཆན་རིས་རྟགས་

ཁྱེད་ནས་ཤོག་ལྷེ་འདིའི་འགོ་ཐོད་དུ་ལིང་ཚེ་རྟེན་གྲངས་།ཀྱི་སྤྱིར་བཏང་རང་བཞིན་གྱི་ངོ་སྤྲོད་མཐོང་ཐུབ།


Example

In the spreadsheet, select the range in which the transposed array can appear. If the original array has n rows and m columns, your selected range must have at least m rows and n columns. Then enter the formula directly, select the original array and press . Or, if you are using the Function Wizard, mark the Array check box. The transposed array appears in the selected target range and is protected automatically against changes.

A

B

C

D

1

2

3

4

5

2

6

7

8

9


The above table is 2 rows, 4 columns. In order to transpose it, you must select 4 rows, 2 columns. Assuming you want to transpose the above table to the range A7:B10 (4 rows, 2 columns) you must select the entire range and then enter the following:

TRANSPOSE(A1:D2)

Then make sure to enter it as matrix formula with . The result will be as follows:

A

B

7

2

6

8

3

7

9

4

8

10

5

9


TREND

ཐིག་གཤིས་འདྲ་སྦྱོར་གྱི་ཐང་ཕྱིར་ལོག་པ།

Syntax

TREND(Data_Y; Data_X; New Data_X; Linear_Type)

Data_Y Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

Data_X(འདེམས་རུང་)Y གཞི་གྲངས་ལིང་ཚེ་མཚོན།

New Data_X(འདེམས་རུང་)ཐང་བསྐྱར་དུ་རྩིས་རྒྱག་པའི་ X གཞི་གྲངས་ལིང་ཚེ་མཚོན།

LinearType (optional). If LinearType = 0, then lines will be calculated through the zero point. Otherwise, offset lines will also be calculated. The default is LinearType <> 0.

In the LibreOffice Calc functions, parameters marked as "optional" can be left out only when no parameter follows. For example, in a function with four parameters, where the last two parameters are marked as "optional", you can leave out parameter 4 or parameters 3 and 4, but you cannot leave out parameter 3 alone.

More explanations on top of this page.

Example

Select a spreadsheet range in which the trend data will appear. Select the function. Enter the output data or select it with the mouse. Mark the Array field, click OK. The trend data calculated from the output data is displayed.

Please support us!