Ченакбандӣ

Controls the scaling of the X or Y axis.

Барои ин фармонро дастрас кардан...

Формат - Меҳварҳо - Меҳвари Y - Ченакроинтихоб кунед tab Формат - Меҳварҳо - Меҳвари Y - Ченакроинтихоб кунед tab Формат - Меҳварҳо - Меҳвари Y - Ченакроинтихоб кунед tab


Меҳварҳои Y ба тарзи автоматӣ дар LibreOffice ченакбандӣ мешаванд то ки он намуди хуб дошта бошад.

Барои натиҷаи беҳтарин метавонед ба тарзи дастӣ ченаки меҳварҳоро ислоҳ намоед.

Масштабноккунӣ

Шумо метавонед арзишҳои зермеҳварҳоро дар ин ҷой дохил намоед. Ба тарзи автоматӣ 5 хосиятро гузоштан мумкин аст Минимум, Максимум, Фосилаи бузург, Фосилаи хурд ва Меҳварҳо.

Минимум

Defines the minimum value for the beginning of the axis.

Максимум

Defines the maximum value for the end of the axis.

Фосилаи бузург

Defines the interval for the main division of the axes. The main interval cannot be larger than the value area.

Фосилаи хурд

Defines the interval for the subdivision of the axes.

Меҳварҳо дар:

Specifies at which position to display the values along the axis.

Автоматӣ

You must first deselect the Automatic option in order to modify the values.

Тасвири эзоҳ

Ин имкониятро бекор гардонед агар арзишҳои "муайян" истифода шаванд.


Ченаки логарифмӣ

Specifies that you want the axis to be subdivided logarithmically.

Тасвири эзоҳ

Ин имконотро истифода баред агар арзишҳои истифодакардаатон аз ҳамдигар фарқи калон дошта бошанд. Бо истифодаи ченаки логарифмӣ метавон хатҳои меҳварро баробар сохт вале арзишҳояшон гуногун.


Reverse direction

Defines where the lower and where the higher values are displayed at the axis. The unchecked state is the mathematical direction. That means for Cartesian coordinate systems that the x-axis shows the lower values on the left and the y-axis shows the lower values at the bottom. For polar coordinate systems the mathematical angle axis direction is counterclockwise and the radial axis is from inner to outer.

Тип

For some types of axes, you can select to format an axis as text or date, or to detect the type automatically. For the axis type "Date" you can set the following options.

Minimum and maximum value to be shown on the ends of the scale.

Resolution can be set to show days, months, or years as interval steps.

Major interval can be set to show a certain number of days, months, or years.

Minor interval can be set to show a certain number of days, months, or years.