Connectors

Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.

There are four types of connector lines:

1. Standard (90-degree angle bends)

2. Fshije stilin e linjës

3. Konektor i Drejtë

4. Curved X

When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object.

To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location.

Lidhës

Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja Fillon me Shigjetë

Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja Mbaron me Shigjetë

Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja me Shigjeta

Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja Fillon me Qark

Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja Mbaron me Qark

Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja me Qark

Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Konektor Linjë

Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse Fillon me Shigjetë

Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse Mbaron me Shigjetë

Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse me Shigjeta

Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse Fillon me Qark

Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse Mbaron me Qark

Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Linja Lidhëse me Qark

Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Konektor i Drejtë

Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë Fillon me Shigjetë

Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë Mbaron me Shigjetë

Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë me Shigjeta

Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë fillon me Qark

Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë mbaron me Qark

Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Drejtë me Qark

Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Konektor i Lakuar

Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar Fillon me Shigjetë

Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar Mbaron me Shigjetë

Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar me Shigjeta

Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar Fillon me Qark

Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar Mbaron me Qark

Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Lidhësja e Lakuar Fillon me Qark

Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.