Štatistické funkcie – časť 5
DEVSQ
Vráti súčet druhých mocnín odchýlok údajových bodov od strednej hodnoty ich výberu.
Syntax
DEVSQ(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing a sample.
Príklad
=MODE(A1:A50)
FORECAST
Extrapolácia následujúcich hodnôt podľa zadaných hodnôt x a y.
Syntax
FORECAST(Hodnota; DataY; DataX)
Value is the x value, for which the y value on the linear regression is to be returned.
Data sú skúmané údaje (v poli).
Data sú skúmané údaje (v poli).
Príklad
=FORECAST(50;A1:A50;B1;B50) returns the Y value expected for the X value of 50 if the X and Y values in both references are linked by a linear trend.
FORECAST.LINEAR
Extrapolácia následujúcich hodnôt podľa zadaných hodnôt x a y.
Syntax
FORECAST.LINEAR(Value; DataY; DataX)
Value is the x value, for which the y value on the linear regression is to be returned.
Data sú skúmané údaje (v poli).
Data sú skúmané údaje (v poli).
Príklad
=FORECAST.LINEAR(50;A1:A50;B1;B50) returns the Y value expected for the X value of 50 if the X and Y values in both references are linked by a linear trend.
NORMSDIST
Vráti hodnotu distribučnej funkcie štandardného normálneho rozdelenia. Rozloženie má strednú hodnotu nula a štandardnú odchýlku jedna.
Platí GAUSS(x)=NORMSDIST(x)-0.5
Syntax
NORMSDIST(Číslo)
Number is the value to which the standard normal cumulative distribution is calculated.
Príklad
=NORMSDIST(1) returns 0.84. The area below the standard normal distribution curve to the left of X value 1 is 84% of the total area.
NORMSDIST
Vráti hodnotu distribučnej funkcie štandardného normálneho rozdelenia. Rozloženie má strednú hodnotu nula a štandardnú odchýlku jedna.
Syntax
NORM.S.DIST(Number; Cumulative)
Number is the value to which the standard normal cumulative distribution is calculated.
Cumulative 0 or FALSE calculates the probability density function. Any other value or TRUE calculates the cumulative distribution function.
Príklady
=NORM.S.DIST(1;0) returns 0.2419707245.
=NORM.S.DIST(1;1) returns 0.8413447461. The area below the standard normal distribution curve to the left of X value 1 is 84% of the total area.
NORMSINV
Vráti inverzné kumulatívne štandardné normále rozdelenie.
Syntax
NORMSINV(Číslo)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať inverzné štandardné logaritmické rozdelenie.
Príklad
=LOGINV(0.05;0;1) vracia 0.19.
NORMSINV
Vráti inverzné kumulatívne štandardné normále rozdelenie.
Syntax
NORMSINV(Číslo)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať inverzné štandardné logaritmické rozdelenie.
Príklad
=LOGINV(0.05;0;1) vracia 0.19.
PERMUT
Vráti počet permutácií pre daný počet objektov.
Syntax
PERMUT(Počet1; Počet2)
Pokusy je celkový počet pokusov.
Count2 is the number of objects in each permutation.
Príklad
=PERMUT(6;3) returns 120. There are 120 different possibilities, to pick a sequence of 3 playing cards out of 6 playing cards.
PERMUTATIONA
Vráti počet permutácií pre zadaný počet objektov (vrátane ich opakovania).
Syntax
PERMUTATIONA(Počet1; Počet2)
Pokusy je celkový počet pokusov.
Count2 is the number of objects in each permutation.
Príklad
Koľkými spôsobmi je možné vybrať 2 objekty z 11 objektov?
=DELTA(1;2) vráti 0.
=PERMUTATIONA(6;3) returns 216. There are 216 different possibilities to put a sequence of 3 playing cards together out of six playing cards if every card is returned before the next one is drawn.
PROB
Vráti pravdepodobnosť hodnôt v oblasti medzi dvomi limitmi. Ak nezadáme horný_limit ,táto funkcia vypočíta pravdepodobnosť založenú na princípu, že hodnoty Data sú rovné dolný_limit.
Syntax
PROB(Data; Pravdepodobnosti; dolný_limit; horný_limit)
Data sú skúmané údaje (v poli).
Probability is the array or range of the corresponding probabilities.
Start is the start value of the interval whose probabilities are to be summed.
End (optional) is the end value of the interval whose probabilities are to be summed. If this parameter is missing, the probability for the Start value is calculated.
Príklad
=PROB(A1:A50;B1:B50;50;60) returns the probability with which a value within the range of A1:A50 is also within the limits between 50 and 60. Every value within the range of A1:A50 has a probability within the range of B1:B50.
RANK
Vráti poradie čísla v danej vzorke.
Syntax
RANK(Hodnota; Data; Typ)
Číslo je číslo, ktorého znamienko má byť zistené.
Data sú skúmané údaje (v poli).
Type (optional) is the sequence order.
Typ = 0 určuje zostupné poradie od posledného prvku pola k prvému (toto je predvolené),
Typ = 1 určuje rastúce poradie od prvého prvku k poslednému.
Príklad
=RANK(A10;A1:A50) returns the ranking of the value in A10 in value range A1:A50. If Value does not exist within the range an error message is displayed.
RANK.AVG
Returns the statistical rank of a given value, within a supplied array of values. If there are duplicate values in the list, the average rank is returned.
The difference between RANK.AVG and RANK.EQ occurs when there are duplicates in the list of values. The RANK.EQ function returns the lower rank, whereas the RANK.AVG function returns the average rank.
Syntax
RANK(Hodnota; Data; Typ)
Číslo je číslo, ktorého znamienko má byť zistené.
Data sú skúmané údaje (v poli).
Type (optional) is the sequence order.
Typ = 1 určuje rastúce poradie od prvého prvku k poslednému.
Typ = 1 určuje rastúce poradie od prvého prvku k poslednému.
Príklad
=RANK.AVG(A10;A1:A50) returns the ranking of the value in A10 in value range A1:A50. If Value does not exist within the range an error message is displayed.
RANK.EQ
Returns the statistical rank of a given value, within a supplied array of values. If there are duplicate values in the list, these are given the same rank.
The difference between RANK.AVG and RANK.EQ occurs when there are duplicates in the list of values. The RANK.EQ function returns the lower rank, whereas the RANK.AVG function returns the average rank.
Syntax
RANK(Hodnota; Data; Typ)
Číslo je číslo, ktorého znamienko má byť zistené.
Data sú skúmané údaje (v poli).
Type (optional) is the sequence order.
Typ = 1 určuje rastúce poradie od prvého prvku k poslednému.
Typ = 1 určuje rastúce poradie od prvého prvku k poslednému.
Príklad
=RANK.EQ(A10;A1:A50) returns the ranking of the value in A10 in value range A1:A50. If Value does not exist within the range an error message is displayed.
SKEW
Vráti šikmosť rozdelenia.
Syntax
SKEW(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
Príklad
=SKEW(A1:A50) calculates the value of skew for the data referenced.
SLOPE
Vráti sklon priamky lineárnej regresie. Sklon je upravený podľa dátových bodov (hodnôt x a y).
Syntax
SLOPE(DataY; DataX)
DataY is the array or matrix of Y data.
DataX is the array or matrix of X data.
Príklad
=MODE(A1:A50)
STANDARDIZE
Prevedie náhodné číslo na normovanú hodnotu.
Syntax
STANDARDIZE(Číslo; StredHodnota; StDev)
Číslo je číslo, ktoré bude testované.
StredHodnota je priemerná hodnota rozdelenia.
ŠtandardOdchýlka reprezentuje štandardnú odchýlku normálneho rozdelenia.
Príklad
=STANDARDIZE(11;10;1) returns 1. The value 11 in a normal distribution with a mean of 10 and a standard deviation of 1 is as much above the mean of 10, as the value 1 is above the mean of the standard normal distribution.
STDEV
Vypočíta odhad štandardnej odchýlky vzorky.
Syntax
STDEV(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing a sample based on an entire population.
Príklad
=STDEV(A1:A50) returns the estimated standard deviation based on the data referenced.
STDEVA
Vypočíta odhad štandardnej odchýlky údajov konvertovaných zo vzorky.
Syntax
STDEVA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0.
Príklad
=STDEVA(A1:A50) returns the estimated standard deviation based on the data referenced.
STDEVP
Vypočíta odhad smerodajnej odchýlku podľa údajov z celej základnej množiny.
Syntax
STDEVP(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing an entire population.
Príklad
=STDEVP(A1:A50) returns a standard deviation of the data referenced.
STDEVP
Vypočíta odhad smerodajnej odchýlku podľa údajov z celej základnej množiny.
Syntax
STDEV.P(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing an entire population.
Príklad
=STDEV.P(A1:A50) returns a standard deviation of the data referenced.
STDEVP
Vypočíta odhad smerodajnej odchýlku podľa údajov z celej základnej množiny.
Syntax
STDEV.S(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing a sample of the population.
Príklad
=STDEV.S(A1:A50) returns a standard deviation of the data referenced.
STDEVPA
Vypočíta smerodajnú odchýlku podľa údajov z celej základnej množiny.
Syntax
STDEVPA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges representing an entire population. Text has the value 0.
Príklad
=STDEVPA(A1:A50) returns the standard deviation of the data referenced.
STEYX
Vráti štandardnú chybu regresného odhadu hodnoty Y pre každé zadané X.
Syntax
STEYX(DataY; DataX)
DataY is the array or matrix of Y data.
DataX is the array or matrix of X data.
Príklad
=MODE(A1:A50)
T.DIST.2T
Calculates the two-tailed Student's T Distribution, which is a continuous probability distribution that is frequently used for testing hypotheses on small sample data sets.
Syntax
TINV(Číslo; StupneVoľnosti)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať štandardné logaritmické rozdelenie.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Príklad
=T.DIST.2T(1; 10) returns 0.3408931323.
T.DIST.RT
Calculates the right-tailed Student's T Distribution, which is a continuous probability distribution that is frequently used for testing hypotheses on small sample data sets.
Syntax
TINV(Číslo; StupneVoľnosti)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať štandardné logaritmické rozdelenie.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Príklad
=T.DIST.RT(1; 10) returns 0.1704465662.
T.INV.2T
Calculates the inverse of the two-tailed Student's T Distribution , which is a continuous probability distribution that is frequently used for testing hypotheses on small sample data sets.
Syntax
TINV(Číslo; StupneVoľnosti)
Number is the probability associated with the two-tailed t-distribution.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Príklad
=T.INV.2T(0.25; 10) returns 1.221255395.
TDIST
Vráti t-rozdelenie.
Syntax
TDIST(Číslo; StupneVoľnosti; Režim)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať štandardné logaritmické rozdelenie.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Mode = 1 returns the one-tailed test, Mode = 2 returns the two-tailed test.
Príklad
=MODE(A1:A50)
TDIST
Vráti t-rozdelenie.
Syntax
TDIST(Číslo; StupneVoľnosti; Režim)
Číslo je hodnota pravdepodobnosti, pre ktorú chcete spočítať štandardné logaritmické rozdelenie.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Cumulative = 0 or FALSE returns the probability density function, 1 or TRUE returns the cumulative distribution function.
Príklad
=T.DIST(1; 10; TRUE) returns 0.8295534338
TINV
Vráti inverziu t-rozdelenia.
Syntax
TINV(Číslo; StupneVoľnosti)
Number is the probability associated with the two-tailed t-distribution.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Príklad
=INT(5.7) vráti 5.
TINV
Vráti inverziu t-rozdelenia.
Syntax
TINV(Číslo; StupneVoľnosti)
Number is the probability associated with the one-tailed t-distribution.
DegreesFreedom is the number of degrees of freedom for the t-distribution.
Príklad
=INT(5.7) vráti 5.
TTEST
Vráti pravdepodobnosť pre Študentov t-Test.
Syntax
TTEST(Data1; Data2; Režim; Typ)
Data1 is the dependent array or range of data for the first record.
Data2 is the dependent array or range of data for the second record.
Mode = 1 calculates the one-tailed test, Mode = 2 the two- tailed test.
Type is the kind of t-test to perform. Type 1 means paired. Type 2 means two samples, equal variance (homoscedastic). Type 3 means two samples, unequal variance (heteroscedastic).
Príklad
=MODE(A1:A50)
TTEST
Vráti pravdepodobnosť pre Študentov t-Test.
Syntax
TTEST(Data1; Data2; Režim; Typ)
Data1 is the dependent array or range of data for the first record.
Data2 is the dependent array or range of data for the second record.
Mode = 1 calculates the one-tailed test, Mode = 2 the two- tailed test.
Type is the kind of t-test to perform. Type 1 means paired. Type 2 means two samples, equal variance (homoscedastic). Type 3 means two samples, unequal variance (heteroscedastic).
Príklad
=MODE(A1:A50)
VAR
Odhadne rozptyl podľa vzorky.
Syntax
VAR(Number1 ; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing a sample based on an entire population.
Príklad
=MODE(A1:A50)
VARA
Odhadne rozptyl vzorky. Hodnota textu je 0.
Syntax
VARA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges representing a sample derived from an entire population. Text has the value 0.
Príklad
=AVERAGE(A1:A50)
VARP
Odhadne rozptyl podľa vzorky.
Syntax
VAR.S(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing a sample based on an entire population.
Príklad
=MODE(A1:A50)
VARP
Vypočíta rozptyl podľa údajov z celej množiny.
Syntax
VARP(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing an entire population.
Príklad
=MODE(A1:A50)
VARP
Vypočíta rozptyl podľa údajov z celej množiny.
Syntax
VAR.P(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges representing an entire population.
Príklad
=MODE(A1:A50)
VARPA
Vypočíta rozptyl na základe údajov z celej množiny. Hodnota textu je 0.
Syntax
VARPA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges representing an entire population.
Príklad
=AVERAGEA(A1:A50)
WEIBULL
Vráti hodnotu Weibullovho rozdelenia.
The Weibull distribution is a continuous probability distribution, with parameters Alpha > 0 (shape) and Beta > 0 (scale).
If C is 0, WEIBULL calculates the probability density function.
If C is 1, WEIBULL calculates the cumulative distribution function.
Syntax
WEIBULL(Číslo; Alfa; Beta; C)
Number is the value at which to calculate the Weibull distribution.
Alpha is the shape parameter of the Weibull distribution.
Beta is the scale parameter of the Weibull distribution.
C indicates the type of function.
Príklad
=POISSON(60;50;1) vráti 0.93.
See also the Wiki page.
WEIBULL.DIST
Vráti hodnotu Weibullovho rozdelenia.
The Weibull distribution is a continuous probability distribution, with parameters Alpha > 0 (shape) and Beta > 0 (scale).
If C is 0, WEIBULL.DIST calculates the probability density function.
If C is 1, WEIBULL.DIST calculates the cumulative distribution function.
Syntax
WEIBULL(Číslo; Alfa; Beta; C)
Number is the value at which to calculate the Weibull distribution.
Alpha is the shape parameter of the Weibull distribution.
Beta is the scale parameter of the Weibull distribution.
C indicates the type of function.
Príklad
=POISSON(60;50;1) vráti 0.93.
See also the Wiki page.