Shortcuts (LibreOffice Accessibility)
You can control LibreOffice without using a mouse device, using only the keyboard.
On each module's main help page (for example, the LibreOffice Writer or LibreOffice Calc main help page) there is a link to access the keyboard shortcuts' help for that module.
In addition, under the keyword "Accessibility" you find step-by-step instructions about how to control the selected module without a mouse device.
Working with the LibreOffice user interface without mouse
मेन्यू पट्टी सक्रिय करना, औजारपट्टी, विंडोज़, तथा दस्तावेज़
F6 स्विच को बारंबार दबाने पर निम्न वस्तुओं के बीच फ़ोकस व सर्कल स्विच होते हैं:
-
menu bar,
-
every toolbar from top to bottom and from left to right,
-
every free window from left to right,
-
document
Press Shift+F6 to switch through objects in the opposite direction.
Press CommandCtrl+F6 to switch to the document.
मेन्यू पट्टी में आने व जाने को स्विच करने के लिए F10 दबाएँ
खुला हुआ सब-मेन्यू, औजारपट्टी या वर्तमान मुक्त विंडो को एस्केप कुंजी बन्द करता है.
मेन्यू कमांड लाना
Press OptionAlt or F6 or F10 to select the first menu (the File menu). With right arrow, the next menu to the right is selected; with left arrow, the previous menu.
Arrow down opens a selected menu. Any additional arrow down and up arrow move the selection through the menu commands. With right arrow you open any existing submenus.
चयनित मेन्यू कमांड को चलाने के लिए एन्टर दबाएँ
प्रतीक कमांड चलाना
Press F6 repeatedly until the first icon on the toolbar is selected. Use the right and left arrows to select an icon on a horizontal toolbar. Similarly, use the up and down arrows to select an icon on a vertical toolbar. The Home key selects the first icon on a toolbar and the End key, the last.
Press Enter to execute the selected icon. If the selected icon normally demands a consecutive mouse action, such as inserting a rectangle, then pressing the Enter key is not sufficient: in these cases press CommandCtrl+Enter.
-
Pressing CommandCtrl+Enter on an icon for creating a draw object. A draw object will be placed into the middle of the view, with a predefined size.
-
Press CommandCtrl+Enter on the Selection tool to select the first draw object in the document. If you want to edit, size, or move the selected draw object, first use CommandCtrl+F6 to set the focus into the document.
If a toolbar is longer than can be displayed on screen, it shows an icon at the right or lower edge. Select the toolbar and press PageUp or PageDown to display the remaining icons.
औजार पट्टी के लिए विशेष संकेत
Press the down arrow or right arrow to open the selected toolbar. This is equivalent to a mouse click. In the toolbar use the right arrow and left arrow keys. The Home and End keys select the first and last icon in the toolbar, respectively.
औजार पट्टी को एस्केप के जरिए चुनें. माउस के बगैर औजारपट्टी को खिसकाना संभव नहीं है.
कॉम्बो बॉक्स से चयन
कॉम्बो बक्सा चुनें. एन्टर दबाएँ.
Use the down arrow or Page Down key to scroll down the combo box entries, or the up arrow or Page Up key to scroll upwards. The Home key takes you to the first entry and the End key takes you to the last entry.
चयनित प्रविष्टि को चलाने के लिए एन्टर दबाएँ.
तालिका में चयन
In several windows, dialogs, and in the table control field, there are tables to select data, for instance, in the right part of the Data Source View. The following keys are used for selections in these tables:
-
स्पेसबार: वर्तमान पंक्ति के चयन तथा किसी चयन को रद्द करने के बीच स्विच करता है परंतु तब नहीं जब वर्तमान कक्ष संपादन मोड में होता है.
-
CommandCtrl+spacebar: switches between selection of the current row and cancellation of this selection.
-
CommandCtrl+Shift+spacebar: switches between selection of the current column and cancellation of this selection.
-
OptionAlt+Up Arrow or OptionAlt+Down Arrow: moves the window separator between table and form, for instance in the bibliography database.
-
In a table control or in the data source view, the Tab key moves to the next column. To move to the next control, press CommandCtrl+Tab. To move to the previous control, press Shift+CommandCtrl+Tab.
विंडोज़ तथा संवादों के आकार तथा स्थान
-
First press OptionAlt+spacebar.
A system menu opens with menu commands like Move, Resize and Close.
-
कमांड चुनें (नीचे तीर, फिर एन्टर).
-
अब आप तीर कुंजियों का इस्तेमाल संवाद या विंडो को खिसकाने या आकार बदलने के लिये कर सकते हैं.
-
परिवर्तन को स्वीकारने के लिए एन्टर कुंजी दबाएँ. परिवर्तनों को रद्द करने के लिए एस्केप बटन दबाएँ.
विंडोज़ तथा औजारपट्टियों को डॉक करना व अनडॉक करना
-
Press F6 until the window or toolbar is selected.
-
Press CommandCtrl+Shift+F10.
वस्तु चुनना
Press Shift+F4 to select the first object in the current document. When an object is selected, press Tab to select the next object, or press Esc to go back to the text.
वस्तु संपादित करें
एंटर कुंजी द्वारा चयनित ओएलई वस्तु को सक्रिय किया जा सकता है.
वस्तु की स्थिति तथा आकार को संपादित करें
-
चयनित वस्तु को एक ग्रिड रेज़ॉल्यूशन इकाई खिसकाने के लिए तीर कुंजियों का इस्तेमाल करें.
Set the grid resolution unit with LibreOffice - PreferencesTools - Options - LibreOffice Writer - Grid in the Resolution area. If you enter a number greater than 1 in the Subdivision area, you must press the arrow key as often as the number states to move the selected object by one grid resolution unit.
-
Use the OptionAlt and arrow keys to move the selected object by one pixel.
-
Use CommandCtrl+Tab to enter the handle edit mode. The upper left handle is the active handle, it starts blinking. Use CommandCtrl+Tab to select the next handle. Press Escape to exit the handle edit mode.
-
हैण्डल संपादन मोड में, तीर कुंजियाँ चयनित हैण्डल को खिसकाती हैं जो कि वस्तु आकार को परिवर्तित करता है.
वस्तु के एंकर संपादित करें
You can move the anchor of an object with the arrow keys. First enter the handle edit mode and select the anchor. Depending on the type of anchor, you can then move the anchor in different directions.
-
वस्तु चुनें...
-
Enter the handle edit mode with CommandCtrl+Tab.
-
The upper left handle starts blinking. Press CommandCtrl+Tab several times, until no handle blinks. This signals that now the anchor of the object is activated. In text documents you can press Shift+CommandCtrl+A to activate the anchor directly.
-
एंकर को खिसकाने के लिए तीर कुंजियों का इस्तेमाल करें. जैसा समुचित होगा, वस्तु एंकर का अनुसरण करेगा.
आप चयनित वस्तु के एंकर को बदल सकते हैं - उदाहरण के लिए, वस्तु के कॉन्टेक्स्ट मेन्यू में.
-
If the object is anchored To Paragraph, the arrow keys move the object to the previous or next paragraph.
-
If the object is anchored To page, the keys Page Up or Page Down move it to the previous or next page.
-
If the object is anchored To character, the Arrow keys move it through the current paragraph.
-
If the object is anchored As character, no anchor icon exists. You cannot move the object.
-
If the object is anchored To frame, the Arrow keys move it to the next frame in the respective direction.
विभाजक लाइनों का नियंत्रण
Documents of LibreOffice Calc, LibreOffice Draw, and LibreOffice Impress can be split horizontally and vertically into separate views. Each view can show other parts of the document. Using the mouse, you can drag a dividing line from the scrollbar into the document.
-
Shift+CommandCtrl+F6: shows the dividing lines at default positions and focus a line.
-
तीर कुंजियाँ: वर्तमान विभाजक लाइनों को बड़े चरण में तीर की दिशा में खिसकाता है
-
शिफ़्ट+तीर कुंजियाँ: वर्तमान विभाजक लाइनों को छोटे चरण में तीर दिशा में खिसकाता है.
-
डिलीट: वर्तमान विभाजक लाइन को मिटाता है
-
शिफ़्ट+डिलीट: दोनों विभाजक लाइनों को मिटाता है
-
एन्टर: वर्तमान स्थित के विभाजक लाइनों को फ़िक्स करता है
-
एस्केप: वर्तमान विभाजक लाइन को इसके डिफ़ॉल्ट स्थान पर रीसेट करता है
डाटा स्रोत दृश्य को नियंत्रित करता है
CommandCtrl + Shift + F4 opens and closes the data source view.
F6: switches between document and toolbars.
+ (plus key): expands the selected entry in the data source explorer.
- (minus key): collapses the selected entry in the data source explorer.
CommandCtrl+Shift+E: switches between data source explorer and table.
क्वैरी डिज़ाइन विंडो में शॉर्टकट
F6: switches between object bar, table view, and selection area.
OptionAlt+Up arrow or OptionAlt+Down arrow: moves the border between table view and selection area up or down.
तालिका दृश्य (क्वैरी डिज़ाइन का ऊपरी क्षेत्र) में कुंजियाँ तथा सम्बन्ध विंडो में कुंजियाँ
CommandCtrl+Arrow key: moves the selected table in the direction of the arrow.
CommandCtrl+Shift+Arrow key: resizes the selected table in the table view.
डिलीट: तालिका दृश्य में से चयनित तालिका या कनेक्शन को मिटाता है.
टैब: तालिका दृश्य में तालिका तथा कनेक्शनों के बीच स्विच करता है.
Enter: when a connection is selected, the Enter key opens the Properties dialog of the connection.
प्रविष्ट करें: जब तालिका चयनित होती है, सूची बक्से से चयन क्षेत्र में एंटर कुंजी प्रथम डाटा क्षेत्र में प्रविष्ट होती है.
चयन क्षेत्र में कुंजियाँ (क्वैरी डिज़ाइन का तल क्षेत्र)
CommandCtrl+Left Arrow or Right Arrow: moves the selected column to the left or to the right.
तालिका डिज़ाइन विंडो में कुंजियाँ
F6: switches between toolbar, column view, and properties area.
इमेज मैप संपादक को नियंत्रित करना
-
Press Tab to select an icon. If you selected one of the icons from Rectangle to Freeform Polygon and you press CommandCtrl+Enter, an object of the selected type is created in default size.
-
If you press Enter while the icon Select is selected, the focus is set into the image window of the ImageMap Editor. Press Esc to set the focus back to the icons and input boxes.
-
If the Select icon is selected and you press Ctrl+Enter, the first object in the image window gets selected.
-
Use the icon Edit Points to switch into the point edit mode for polygons and back.
-
छवि विंडो में अगले बिन्दु को चुनने के लिए कंट्रोल+टैब का इस्तेमाल करें. शिफ़्ट+कंट्रोल+टैब का इस्तेमाल पिछले बिन्दु को चुनने के लिए करें.
-
चयनित वस्तु को मिटाने के लिए छवि विंडो में फ़ोकस कर मिटाएँ कुंजी का इस्तेमाल करें
मदद को नियंत्रित करना
Press Shift+F1 to display the Extended Tips for the currently selected command, icon or control.
मुख्य मदद पृष्ठ पर नेविगेट करना
-
मुख्य मदद पृष्ठों में, अगले हायपरलिंक पर जाने के लिए टैब का इस्तेमाल करें तथा पिछली कड़ी पर जाने के लिए शिफ़्ट+टैब का इस्तेमाल करें.
-
चयनित हायपरलिंक को चलाने के लिए कृपया एन्टर कुंजी दबाएँ.
-
पिछले मदद पृष्ठ पर वापस जाने के लिए एंटर कुंजी के ऊपर स्थित बैकस्पेस कुंजी को दबाएँ.
पाठ आयात संवाद नियंत्रित करना (सीएसवी फ़ाइल आयात)
मापनी
-
बायाँ या दायाँ तीर: एक स्थान बायाँ या दायाँ जाएँ
-
कंट्रोल+बायाँ तीर या कंट्रोल+दायाँ तीर: पिछले या अगले विभाजन पर जाएँ
-
कंट्रोल+शिफ़्ट+बायाँ तीर या कंट्रोल+शिफ़्ट+दायाँ तीर: एक विभाजन को एक स्थान बायाँ या दायाँ खिसकाता है
-
होम या एण्ड: प्रथम या अंतिम संभव स्थान पर जाएँ
-
कंट्रोल+होम या कंट्रोल+एण्ड: प्रथम या अंतिम विभाजन पर जाएँ
-
शिफ़्ट+कंट्रोल+होम या शिफ़्ट+कंट्रोल+एण्ड: विभाजन को प्रथम या अंतिम स्थिति पर खिसकाएँ
-
स्पेस कुंजी: विभाजन प्रविष्ट करता है या मिटाता है
-
इंसर्ट कुंजी: विभाजन प्रविष्ट करता है (मौजूदा विभाजन को अपरिवर्तित रखता है)
-
डिलीट कुंजी: विभाजन को मिटाता है
-
शिफ़्ट+डिलीट: सभी विभाजनों को मिटाता है
-
Up Arrow or Down Arrow: scroll table down or up one row
-
Page Up or Page Down: scroll table down or up one page
-
एस्केप कुंजी (माउस खींचने के दौरान): खींचना रद्द करें, विभाजन को पुराने स्थान पर खिसकाएँ
पूर्वावलोकन
-
बायाँ तीर या दायाँ तीर: बायाँ या दायाँ स्तम्भ चुनें तथा अन्य चयन साफ करें
-
कंट्रोल+बायाँ तीर या कंट्रोल+दायाँ तीर: फ़ोकस को बायाँ या दायाँ स्तम्भ पर ले जाता है (चयन को बदलता नहीं)
-
शिफ़्ट+बायाँ तीर या शिफ़्ट+दायाँ तीर: चयनित सीमा को फैलाता या सिकोड़ता है
-
कंट्रोल+शिफ़्ट+बायाँ तीर या कंट्रोल+शिफ़्ट+दायाँ तीर: चयनित दायरे को फैलाता या समेटता है (अन्य चयन को बदलता नहीं है)
-
घर या अंत: प्रथम या अंतिम स्तम्भ चुनें (संकेतक कुंजियों के रूप में शिफ़्ट या कंट्रोल का इस्तेमाल करें)
-
शिफ़्ट+स्पेस कुंजी: अंतिम चयनित स्तम्भ से वर्तमान स्तम्भ तक दायरा चुनें
-
कंट्रोल+शिफ़्ट+स्पेस कुंजी: अंतिम चयनित स्तम्भ से वर्तमान स्तम्भ तक दायरा चुनें (अन्य चयन को प्रभावित नहीं करता)
-
कंट्रोल+A: सभी स्तम्भ का चयन करता है
-
Shift+F10: open a context menu
-
कंट्रोल+1 ... कंट्रोल+7: चयनित स्तम्भों के लिए सेट करें 1ला ... 7वां स्तम्भ क़िस्म
-
Up Arrow or Down Arrow: scroll table down or up one row
-
Page Up or Page Down: scroll table down or up one page
-
कंट्रोल+होम या कंट्रोल+एण्ड: तालिका के शीर्ष या तल पर स्क्रॉल करें
प्रविष्ट करें विशिष्ट अक्षर संवाद को नियंत्रित करना
-
टैब के जरिए संवाद में सभी नियंत्रकों के बीच स्विच कर सकते हैं
-
OptionAlt+Down Arrow opens a combo box. Enter selects the current entry in the combo box.
-
Arrow buttons move through the main selection area. Spacebar adds the current character to the list of characters to be inserted.