Statistikaj Funkcioj - Parto Kvara
MEZO.SE
Returns the arithmetic mean of all cells in a range that satisfy a given condition. The AVERAGEIF function sums up all the results that match the logical test and divides this sum by the quantity of selected values.
MEZO.SEOJ
Returns the arithmetic mean of all cells in a range that satisfy given multiple criteria. The AVERAGEIFS function sums up all the results that match the logical tests and divides this sum by the quantity of selected values.
AVEDEV
Liveras la mezumon de la absolutaj devioj de datumoj for de ilia mezumo. Mezuras la difuzecon de datumaro.
Sintakso
AVEDEV(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are values or ranges that represent a sample. Each number can also be replaced by a reference.
Ekzemplo
=MEZUMA.DEVIO(A1:A50)
AVERAGE
Liveras la mezumon de la argumentoj.
Sintakso
AVERAGE(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
Ekzemplo
=MEZUMO(A1:A50)
AVERAGEA
Liveras la mezumon de la argumentoj. La valoro de teksto estas 0.
Sintakso
AVERAGEA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges. Text has the value of 0.
Ekzemplo
=MEZUMOA(A1:A50)
CENTILO
Returns the alpha-percentile of data values in an array. A percentile returns the scale value for a data series which goes from the smallest (Alpha=0) to the largest value (alpha=1) of a data series. For Alpha = 25%, the percentile means the first quartile; Alpha = 50% is the MEDIAN.
Sintakso
PERCENTILE(Data; Alpha)
Datumoj reprezentas la tabelon de datumoj.
Alfa reprezentas la procenton de la skalo inter 0 kaj 1.
Ekzemplo
=PERCENTILE(A1:A50;0.1) represents the value in the data set, which equals 10% of the total data scale in A1:A50.
CENTILO.EKSK
Liveras la Alfa-an centilon de donita amplekso de valoroj por donita valoro de Alfa, en la amplekso 0 al 1 (ekskluzive). Centilo liveras la skalan valoron por datumaro kiu iras de la plej malgranda (Alfa=0) ĝis la plej granda valoro (Alfa=1) de datuma serio. Por Alfa = 25%, la centilo signifas la unuan kvarilon; Alfa = 50% estas la MEDIANO.
If Alpha is not a multiple of 1/(n+1), (where n is the number of values in the supplied array), the function interpolates between the values in the supplied array, to calculate the percentile value. However, if Alpha is less than 1/(n+1) or Alpha is greater than n/(n+1), the function is unable to interpolate, and so returns an error.
La diferenco inter CENTILO.INK kaj CENTILO.EKSK estas ke, en la funkcio CENTILO.INK, la valoro de alfa estas en la amplekso 0 ĝis 1 inkluzive, kaj en la funkcio CENTILO.EKSK, la valoro de alfa estas en la amplekso 0 ĝis 1 ekskluzive.
Sintakso
CENTILO.EKSK(Datumo; Alfa)
Datumoj reprezentas la tabelon de datumoj.
Alfa reprezentas la procenton de la skalo inter 0 kaj 1.
Ekzemplo
CENTILO.EKSK(A1:A50; 10%) donas la valoron en la datumaro, kiu egalas al 10% de la datuma skalo en A1:A50.
CENTILO.INK
Liveras la alfa-centilon de datumaj valoroj en tabelo. Centilo liveras la skalan valoron por datuma serio kiu iras ek de la plej malgranda (Alfa=0) ĝis la plej granda valoro (Alfa=1) de datuma serio. Por Alfa = 25%, la centilo signifas la unuan kvarilon; Alfa = 50% estas la mediano.
La diferenco inter CENTILO.INK kaj CENTILO.EKSK estas ke, en la funkcio CENTILO.INK, la valoro de alfa estas en la amplekso 0 ĝis 1 inkluzive, kaj en la funkcio CENTILO.EKSK, la valoro de alfa estas en la amplekso 0 ĝis 1 ekskluzive.
Sintakso
CENTILO.INK(Datumo; Alfa)
Datumoj reprezentas la tabelon de datumoj.
Alfa reprezentas la procenton de la skalo inter 0 kaj 1.
Ekzemplo
CENTILO.INK(A1:A50;0,1) donas la valoron en la datumaro, kiu egalas al 10% de la datuma skalo A1:A50.
CENTILRANGO
Liveras la procentan rangon de valoro en datumaro.
Sintakso
PERCENTRANK(Data; Value; Significance)
Datumoj reprezentas la tabelon de datumoj en la samplo.
Valoro prezentas la valoron kies centilo estas komputota.
Significance An optional argument that specifies the number of significant digits that the returned percentage value is rounded to. If omitted, a value of 3 is used.
Ekzemplo
=PERCENTRANK(A1:A50;50) returns the percentage rank of the value 50 from the total range of all values found in A1:A50. If 50 falls outside the total range, an error message will appear.
FI
liveras la valorojn de la distribua funkcio por norma distribuo.
Sintakso
FI(Numero)
Numero reprezentas la valoron sur kiu bazi la norman distribuon.
Ekzemplo
=DELTA(1;2) liveras je 0.
=DELTA(1;2) liveras je 0.
=DELTA(1;2) liveras je 0.
KVARILO
Liveras la kvarilon de datumaro.
Sintakso
KVARILO(Datumoj; Tipo)
Datumoj reprezentas la tabelon de datumoj en la samplo.
Tipo reprezentas la tipon de kvarilo. (0 = MIN, 1 = 25%, 2 = 50% (MEDIANO), 3 = 75% kaj 4 = MAKS.)
Ekzemplo
=QUARTILE(A1:A50;2) returns the value of which 50% of the scale corresponds to the lowest to highest values in the range A1:A50.
MAX
Liveras la maksimuman valoron el listo de argumentoj.
Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error.
Sintakso
MAX(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
Ekzemplo
=MAKS(A1;A2;A3;50;100;200) liveras la plej grandan valoron el la listo.
=MAKS(A1:B100) liveras la plej grandan valoron el la listo.
MAXA
Liveras la maksimuman valoron el listo de argumentoj. Kontraste al MAKS, oni povas enigi tekston. La valoro de la teksto estas 0.
The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered.
Sintakso
MAXA(Value1; Value2; ...; Value30)
Value1; Value2;...; Value30 are values or ranges. Text has the value of 0.
Ekzemplo
=MAKSA(A1;A2;A3;50;100;200;"Teksto") liveras la plej grandan valoron el la listo.
=MAKSA(A1:B100) liveras la plej grandan valoron el la listo.
MEDIAN
Liveras la medianon de datumaro. En datumaro kiu enhavas neparan nombron da valoroj, la mediano estos la numero en la mezo de la aro, kaj en aro kiu enhavas paran nombron da valoroj, ĝi estos la mezumo de la du valoroj en la mezo de la aro.
Sintakso
MEDIAN(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are values or ranges, which represent a sample. Each number can also be replaced by a reference.
Ekzemplo
for an odd number: =MEDIAN(1;5;9;20;21) returns 9 as the median value.
for an even number: =MEDIAN(1;5;9;20) returns the average of the two middle values 5 and 9, thus 7.
MIN
Liveras la minimuman valoron el listo de argumentoj.
Returns 0 if no numeric value and no error was encountered in the cell range(s) passed as cell reference(s). Text cells are ignored by MIN() and MAX(). The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered. Passing a literal string argument to MIN() or MAX(), e.g. MIN("string"), still results in an error.
Sintakso
MIN(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
Ekzemplo
=MIN(A1:B100) liveras la plej malgrandan valoron el la listo.
MINA
Liveras la minimuman valoron el listo de argumentoj. Oni povas enigi tekston. La valoro de la teksto estas 0.
The functions MINA() and MAXA() return 0 if no value (numeric or text) and no error was encountered.
Sintakso
MINA(Value1; Value2; ...; Value30)
Value1, Value2, ..., Value30 are values or ranges. Text has the value of 0.
Ekzemplo
=DELTA(1;2) liveras je 0.
=MINA(A1:B100) liveras la plej malgrandan valoron el la listo.
MODE.MULT
Returns a vertical array of the statistical modes (the most frequently occurring values) within a list of supplied numbers.
Sintakso
MODE.MULT(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
As the MODE.MULT function returns an array of values, it must be entered as an array formula. If the function is not entered as an array formula, only the first mode is returned, which is the same as using the MODE.SNGL function.
Ekzemplo
=MODO(A1:A50)
MODE.SNGL
Liveras la plej oftan, aŭ plej ripetantan, valoron en datumaro. Se kelkaj valoroj havas la saman oftecon, ĝi liveras la plej malgrandan el tiuj valoroj. Eraro okazas kiam neniu valoro aperas almenaŭ dufoje.
Sintakso
MODE.SNGL(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
If the data set contains no duplicate data points, MODE.SNGL returns the #VALUE! error value.
Ekzemplo
=MODO(A1:A50)
MODO
Liveras la plej oftan valoron en datumaro. Se kelkaj valoroj havas la plajan oftecon, liveras la plej malgrandan el tiuj valoroj. Eraro okazas kiam neniu valoro aperas almenaŭ dufoje.
Sintakso
MODE(Number1; Number2; ...; Number30)
Number1, Number2, ..., Number30 are numerical values or ranges.
Ekzemplo
=MODO(A1:A50)
NEGBINOMDIST
Liveras la negativan binomian distribuon.
Sintakso
NEGBINOMDIST(X; R; SP)
X reprezentas la valoron liverotan por nesukcesa teksto.
R reprezentas la valoron liverotan por sukcesa teksto.
SP estas la probableco de la sukceso de provo.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
NEGBINOMDIST
Liveras la negativan binomian densecon aŭ distribuan funkcion.
Sintakso
NEGBINOM.DIST(X; R; SP; Cumulative)
X reprezentas la valoron liverotan por nesukcesa teksto.
R reprezentas la valoron liverotan por sukcesa teksto.
SP estas la probableco de la sukceso de provo.
Cumulative = 0 calculates the density function, Cumulative = 1 calculates the distribution.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
=PUASON(60;50;1) liveras je 0,93.
NORMDIST
Liveras la densecan funkcion aŭ la norman akumulan distribuon.
Sintakso
NORMDIST(Number; Mean; StDev; C)
Numero estas la valoro de la distribuo, sur kiu bazi la norman distribuon.
Mezumo estas la mezuma valoro de la distribuo.
Mezumo reprezentas la mezumon de la norma distribuo.
C is optional. C = 0 calculates the density function, C = 1 calculates the distribution.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
=PUASON(60;50;1) liveras je 0,93.
NORMDIST
Liveras la densecan funkcion aŭ la norman akumulan distribuon.
Sintakso
NORM.DIST(Number; Mean; StDev; C)
Numero estas la valoro de la distribuo, sur kiu bazi la norman distribuon.
Mezumo estas la mezuma valoro de la distribuo.
Mezumo reprezentas la mezumon de la norma distribuo.
C = 0 calculates the density function, C = 1 calculates the distribution.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
=PUASON(60;50;1) liveras je 0,93.
NORMINV
Liveras la inverson de la norma akumula distribuo.
Sintakso
NORMINV(Number; Mean; StDev)
Numero representas la probablecon uzi por komputi la inversan norman distribuon.
Mezumo reprezentas la mezumon de la norma distribuo.
Mezumo reprezentas la mezumon de la norma distribuo.
Ekzemplo
=NORMINV(0.9;63;5) returns 69.41. If the average egg weighs 63 grams with a standard deviation of 5, then there will be 90% probability that the egg will not be heavier than 69.41g grams.
NORMINV
Liveras la inverson de la norma akumula distribuo.
Sintakso
NORM.INV(Number; Mean; StDev)
Numero representas la probablecon uzi por komputi la inversan norman distribuon.
Mezumo reprezentas la mezumon de la norma distribuo.
Mezumo reprezentas la mezumon de la norma distribuo.
Ekzemplo
=NORM.INV(0.9;63;5) returns 69.4077578277. If the average egg weighs 63 grams with a standard deviation of 5, then there will be 90% probability that the egg will not be heavier than 69.41g grams.
PEARSON
Liveras la Pearson-produtan momentan korelacian koeficienton r.
Sintakso
PEARSON(Data1; Data2)
Datumoj reprezentas la tabelon de datumoj.
Datumoj reprezentas la tabelon de datumoj.
Ekzemplo
=PEARSON(A1:A30;B1:B30) returns the Pearson correlation coefficient of both data sets.
PERCENTRANK.EXC
Returns the relative position, between 0 and 1 (exclusive), of a specified value within a supplied array.
The difference between PERCENTRANK.INC and PERCENTRANK.EXC is that PERCENTRANK.INC calculates a value in the range 0 to 1 inclusive, whereas the PERCENTRANK.EXC function calculates a value in the range 0 to 1 exclusive.
Sintakso
PERCENTRANK.EXC(Data; Value; Significance)
Datumoj reprezentas la tabelon de datumoj en la samplo.
Valoro prezentas la valoron kies centilo estas komputota.
Significance An optional argument that specifies the number of significant digits that the returned percentage value is rounded to.
Ekzemplo
=PERCENTRANK.EXC(A1:A50;50) returns the percentage rank of the value 50 from the total range of all values found in A1:A50. If 50 falls outside the total range, an error message will appear.
PERCENTRANK.INC
Returns the relative position, between 0 and 1 (inclusive), of a specified value within a supplied array.
The difference between PERCENTRANK.INC and PERCENTRANK.EXC is that PERCENTRANK.INC calculates a value in the range 0 to 1 inclusive, whereas the PERCENTRANK.EXC function calculates a value in the range 0 to 1 exclusive.
Sintakso
PERCENTRANK.INC(Data; Value; Significance)
Datumoj reprezentas la tabelon de datumoj en la samplo.
Valoro prezentas la valoron kies centilo estas komputota.
Significance An optional argument that specifies the number of significant digits that the returned percentage value is rounded to.
Ekzemplo
=PERCENTRANK.INC(A1:A50;50) returns the percentage rank of the value 50 from the total range of all values found in A1:A50. If 50 falls outside the total range, an error message will appear.
POISSON.DIST
Liveras la Poisson-distribuon.
Sintakso
PUASONDIST(Numero; Mezumo; C)
Numero reprezentas la valoron sur kiu bazi la Puason-distribuon.
Mezumo estas la meza valoro de la Puason-distribuo.
C (optional) = 0 or False calculates the density function; C = 1 or True calculates the distribution. When omitted, the default value True is inserted when you save the document, for best compatibility with other programs and older versions of LibreOffice.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
PUASONDIST
Liveras la Puason-distribuon.
Sintakso
PUASONDIST(Numero; Mezumo; C)
Numero reprezentas la valoron sur kiu bazi la Puason-distribuon.
Mezumo estas la meza valoro de la Puason-distribuo.
C (optional) = 0 or False calculates the density function; C = 1 or True calculates the distribution. When omitted, the default value True is inserted when you save the document, for best compatibility with other programs and older versions of LibreOffice.
Ekzemplo
=PUASON(60;50;1) liveras je 0,93.
QUARTILE.EXC
Liveras petitan kvarilon de donita amplekso de valoroj, bazitan sur centilo inter 0 kaj 1 ekskluzive.
La diferenco inter KVARILO.INK kaj KVARILO.EKSK estas ke, en la funkcio KVARILO.INK, la valoro de alfa estas en la amplekso 0 ĝis 1 inkluzive, kaj en la funkcio KVARILO.EKSK, la valoro de alfa estas en la amplekso 0 ĝis 1 ekskluzive.
Sintakso
KVARILO(Datumoj; Tipo)
Data represents the range of data values for which you want to calculate the specified quartile.
Type An integer between 1 and 3, representing the required quartile. (if type = 1 or 3, the supplied array must contain more than 2 values)
Ekzemplo
=QUARTILE.EXC(A1:A50;2) returns the value of which 50% of the scale corresponds to the lowest to highest values in the range A1:A50.
QUARTILE.INC
Liveras la kvarilon de datumaro.
La diferenco inter KVARILO.INK kaj KVARILO.EKSK estas ke la funkcio KVARILO.INK bazas sian kalkulon sur centila amplekso 0 ĝis 1 inkluzive, dum la funkcio KVARILO.EKSK bazas sian kalkulon sur centilo en la amplekso 0 ĝis 1 ekskluzive.
Sintakso
KVARILO(Datumoj; Tipo)
Datumoj reprezentas la tabelon de datumoj en la samplo.
Tipo reprezentas la tipon de kvarilo. (0 = MIN, 1 = 25%, 2 = 50% (MEDIANO), 3 = 75% kaj 4 = MAKS.)
Ekzemplo
=QUARTILE.INC(A1:A50;2) returns the value of which 50% of the scale corresponds to the lowest to highest values in the range A1:A50.