གིརིཌི།
དངོས་པོ་ཚུ་སྤོ་བཤུད་དང་གསར་བསྐྲུན་འབད་ནིའི་དོན་ལུ་གིརིཌི་སྒྲིག་སྟངས་ཚུ་ངེས་འཛིན་འབདཝ་ཨིན།
If you have activated the snap grid but wish to move or create individual objects without constraining them, keep the Shift key pressed to deactivate this function for as long as needed.
པར་བཏབ།
པར་ཐིག་ཚུ་ལུ།
Snaps the edge of a dragged object to the nearest snap line when you release the mouse.
ཁྱོད་ཀྱིས་ཡང་གསལ་སྟོན་ ཡང་ན་ པར་རིས་ཡིག་ཆ་ནང་གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་ཐོབ་ཚུགས་མི་ལམ་སྟོན་ཚུ་ལུ་པར་བཏབ་ལམ་སྟོན་ཚུ་ལུ་པར་བཏབ་ལམ་སྟོན་ཚུའི་ངོས་དཔར་ལུ་པར་བཏབ་ནི་ ལག་ལེན་འཐབ་ཐོག་ལས་ཨ་ནི་སྒྲིག་སྟངས་ ངེས་འཛིན་འབད་ཚུགས།
ཤོག་ལེབ་ས་སྟོང་ཚུ་ལུ།
Specifies whether to align the contour of the graphic object to the nearest page margin.
ཚད་རིས་ཚུའི་དངོས་པོ་གི་འོད་རྟགས་ ཡང་ན་ བུར་གཞོང་གྲལ་ཐིག་འདི་པར་བཏབ་ནིའི་ཁྱབ་ཚད་ནང་ངེས་པར་འོང་དགོ།
གསལ་སྟོན་ཡང་ན་པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་ས་སྟོང་ཚུ་ལུ་པར་བཏབ་ས་སྟོང་ཚུ་ལུ་པར་བཏབ་ ས་སྟོང་ཚུ་ལུ་པར་བཏབ་ནིའི་ངོས་དཔར་གྱི་ཐོག་ལས་ འཛུལ་སྤྱོད་ འབད་ཚུགས།
དངོས་པོའི་གཞི་ཁྲམ་ལུ།
Specifies whether to align the contour of the graphic object to the border of the nearest graphic object.
ཚད་རིས་ཚུའི་དངོས་པོ་གི་བུར་གཞོང་གྲལ་ཐིག་ ཡང་ན་ འོད་རྟགས་འདི་པར་བཏབ་ནིའི་ཁཡབ་ཚད་ནང་ངེས་པར་འོང་དགོ།
གསལ་སྟོན་ ཡང་ན་ པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་དངོས་པོའི་མཐའ་མཚམས་ལུ་པར་བཏབ་ དངོས་པོའི་མཐའ་མཚམས་ལུ་པར་བཏབ་དངོས་པོའི་མཐའ་མཚམས་ངོས་དཔར་ལུ་པར་བཏབ་ཐོག་ལས་་ འཛུལ་སྤྱོད་ འབད་ ཚུགས།
དངོས་པོའི་ས་ཚིགས་ཚུ་ལུ།
Specifies whether to align the contour of the graphic object to the points of the nearest graphic object.
འ་ནི་འདི་པར་བཏབ་ནིའི་ཁྱབ་ཚད་ནང་ཚད་རིས་ཚུའི་དངོས་པོ་གི་བུར་གཞོང་གྲལ་ཐིག་ ཡང་ན་ འོད་རྟགས་ཡོད་པ་ཅིན་རྐྱངམ་གཅིག་འཇུག་སྤྱོད་འབད་ཚུགས།
གསལ་སྟོན་ ཡང་ན་ པར་རིས་ཡིག་ཆ་ནང་ ཨ་ནི་ལས་འགན་འདི་ཡང་ གདམ་ཁ་ཚུའི་ཕྲ་རིང་ནང་ དངོས་པོའི་པོ་འིནཊིསི་ལུ་པར་བཏབ་དངོས་པོའི་པོ་འིནཊིསི་ལུ་པར་བཏབ་དངོས་པོའི་པོ་འིནཊིསི་ངོས་དཔར་ལུ་པར་བཏབ་ ཐོག་ལས་ འཛུལ་སྤྱོད་ འབད་ཚུགས།
པར་བཏབ་ནིའི་ཁྱབ་ཚད།
Defines the snap distance between the mouse pointer and the object contour. LibreOffice Impress snaps to a snap point if the mouse pointer is nearer than the distance selected in the Snap range control.
Constrain Objects
དངོས་པོ་ཚུ་གསར་བསྐྲུན་ ཡང་ན་ སྤོ་བཤུད་འབདཝ་ད།
Specifies that graphic objects are restricted vertically, horizontally or diagonally (45°) when creating or moving them. You can temporarily deactivate this setting by pressing the Shift key.
མཐའམ་ཚུ་རྒྱ་བསྐྱེད་འབད།
Specifies that a square is created based on the longer side of a rectangle when the Shift key is pressed before you release the mouse button. This also applies to an ellipse (a circle will be created based on the longest diameter of the ellipse). When the Extend edges box is not marked, a square or a circle will be created based on the shorter side or diameter.
པད་སྐོར་བསྒྱིརཝ་ད།
Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control. If you want to rotate an object outside the defined angle, press the Shift key when rotating. Release the key when the desired rotation angle is reached.
སྐུགས་མར་ཕབ།
Defines the angle for point reduction. When working with polygons, you might find it useful to reduce their editing points.