འཕྲལ་འཕྲལ་རང་ལག་ལེན་འཐབ་ཡོད་པའི་ཨེབ་རྟ་ཚུ།

ཆ་མེད་གཏང་།

ཨེབ་གཏང་ ཆ་མེད་གཏང་དེ་གིས་ བསྒྱུར་བཅོས་ཚུ་མ་སྲུང་པར་ ཌའི་ལོག་འདི་ཁ་བསྡམས་བཞགཔ་ཨིན།

རྫོགས་ནི།

བསྒྱུར་བཅོས་ཚུ་ཆ་མཉམ་འཇུགཔ་དང་ཝི་ཛརཌི་འདི་ཁ་བསྡམས་ཨིན།

Toolbars

མདའ་རྟགས་འདི་ ངོས་དཔར་ཚུ་གི་ཤུལ་མམ་ཨེབ་གཏང་བཞིནམ་ལས་ ཁྱོད་རང་གི་ལག་ཆས་ཕྲ་རིང་འདི་ཁ་ཕྱེ། ལག་ཆས་ཕྲ་རིང་སྤོ་བཤུད་འབད་ནིའི་དོན་ལུ་ འགོ་མིང་ཕྲ་རིང་འདི་འདྲུད་ད། ཁྱོད་ཀྱིས་མཱའུསི་ཨེབ་རྟ་འདི་འཛིན་འགྲེལ་འབདཝ་ཅིག་ ལག་ཆས་ཕྲ་རིང་འདི་གནས་ས་གསརཔ་གུ་ལྷག་ལུསཔ་ཨིན། ལག་ཆས་ཕྲ་རིང་ཌོཀ་འབད་ས་ལུ་ འགོ་མིང་ཕྲ་རིང་འདི་གནས་ས་གཞན་མི་ཅིག་ལུ་འདྲུད་ནི་དང་ ཡང་ཅིན་ སྒོ་སྒྲིག་གི་མཐའམ་ལུ་འདྲུད་ད། སྒོ་སྒྲིག་ངོས་་དཔར་ཁ་བསྡམས་ཟེར་མི་ལུ་ ཨེབ་གཏང་བཞིནམ་ལས་ ལག་ཆས་ཕྲ་རིང་འདི་ཁ་བསྡམས་སྟོན་ - ལག་ཆས་ཕྲ་རིང་ - (ལག་ཆས་ཕྲ་རིང་གི་མིང་) འདི་གདམ་ཁ་རྐྱབ་བཞིནམ་ལས་ ལག་ཆས་ཕྲ་རིངདེ་ ལོག་འདི་རང་མཐོང་ཚུགསཔ་བཟོ།

Spin button

  1. In form controls, a spin button is a property of a numerical field, currency field, date field, or time field. If the property "Spin button" is enabled, the field shows a pair of symbols with arrows pointing to opposing directions, either vertically or horizontally.

  2. In the Basic IDE, a spin button is the name used for the numerical field together with the two arrow symbols.

You can type a numerical value into the field next to the spin button, or select the value with the up-arrow or down-arrow symbols on the spin button. On the keyboard you can press the up arrow and down arrow keys to increase or reduce the value. You can press the Page Up and Page Down keys to set the maximum and minimum value.

བསྒྱིར་སྒྲོམ་གྱིས་ཨང་གྲངས་ཀྱི་གནས་གོང་འདི་ངེས་འཛིན་འབད་བ་ཅིན་ ཁྱོད་ཀྱིས་ཚད་འཇལ་ཆ་ཕྲེན་, དཔེར་ན, 1 cm or 5 mm, 12 pt or 2"འདི་ངེས་འཛིན་འབད་བཏུབ།

གཞི་བསྒྱུར་འབད།

ཁྱོད་ཀྱིས་ཌའི་ལོག་ལས་གདོང་བསྐྱོད་འབད་བ་ཅིན་ ཨེབ་རྟ་འདི་ལུ་ཤུལ་མམ་ཟེར་སླབ་ཨིན།ཤུལ་མམ་ མཇུག་གི་ཤོག་ལེབ་གུ་ཨེབ་རྟ་དེ་ལུ་མིང་ཡོད་ གཞི་བསྒྱུར་དེ་ལས་གཞི་བསྒྱུར་འདི་ཨེབ་རྟ་ཨེབ་བཞིནམ་ལས་ལཱ་འགན་འགྲུབ་ཨིན།

སྐབས་དོན་གྱི་དཀར་ཆག

དངོས་པོ་གི་སྐབས་དོན་་དཀར་ཆག་འདི་ཤུགས་ལྡན་བཟོ་ནའི་དོན་ལས་ དང་པ་རང་ དངོས་པོ་འདི་ དང་བཅས་ཨེབ་ནི་དང་ མཱའུསི་ཨེབ་རྟ་འདི་སེལ་འཐུ་འབད་ནའི་དོན་ལུ་ཨིན་ དེ་ལས་ དངོས་པོ་འདི་སེལ་འཐུ་འདབ་འདི་མེད་རུང་ནང་དོན་དཀར་ཆག་ལ་ལོ་ཅིག་བོད་བརྡ་འབད་བཏུབ། LibreOffice ནང་ལུ་ནང་དོན་གྱི་དཀར་ཆག་འདི་ག་སྟེ་རང་ཐོབ་ཚུགས།

བཏོན་གཏང་།

གིས་ སེལ་འཐུ་འབད་ཡོད་པའི་ཆ་ཤས་དང་ ཡང་ན་ ངེས་དཔྱད་འདི་བཏོན་གཏངམ་ཨིན།

བཏོན་གཏང་།

སེལ་འཐུ་འབད་ཡོད་མི་གི་ཆ་ཤས་དང་ ཡང་ཅིན་ ངེས་དཔྱད་དགོས་མཁོ་མེད་པའི་ཆ་ཤས་ཚུ་བཏོན་གཏངམ་ཨིན།

མེ་ཊིཀ།

You can enter values in the input fields in different units of measurement. The default unit is inches. However, if you want a space of exactly 1cm, then type "1cm". Additional units are available according to the context, for example, 12 pt for a 12 point spacing. If the value of the new unit is unrealistic, the program uses a predefined maximum or minimum value.

ཁ་བསྡམས།

ཌའི་ལོག་ཁ་བསྡམས་ནི་དང་བསྒྱུར་བཅོས་ཚུ་ཆ་མཉམ་སྲུང་བཞག་འབདཝ་ཨིན།

ཁ་བསྡམས།

ཌའི་ལོག་འདི་ཁ་བསྡམས་ཨིན།

འཇུག་སྤྱོད་འབད།

ཌའི་ལོག་འདི་ཁ་མ་བསྡམས་པར་ གནས་གོང་སེལ་འཐུ་འབད་ཡོད་མི་ ཡང་ཅིན་ ལེགས་བཅོས་འབད་ཡོད་མི་འདི་འཇུག་བཅོས་འབདཝ་ཨིན།

བསྐུམ/འཕར་ནི།

ཌའི་ལོག་འདི་ཨིན་པུཊི་ས་སྒོ་གི་ཚད་ལུ་མར་ཕབ་འབད་ནའི་དོན་ལུ་ ངེས་དཔར་ བསྐུམ་ ཨེབ་གཏང་། ནེ་སྦེ་འབད་བ་ཅིན་ ཤོག་ཁྲམ་གྱི་ནང་ལུ་དགོས་མཁོ་ཡོད་མིའི་གཞི་བསྟུན་གུ་ རྟགས་བཀལ་ནི་འདི་འཇམ། དེ་ལས་ངེས་དཔར་ཚུ་རང་བཞིན་གྱིས་འབད་Maximizeངེས་དཔར་ལུ་གཞི་བསྒྱུར་འབད་ཚུགས། ཌའི་ལོག་འདི་ཚད་ངོ་མ་ལུ་སོར་ཆུད་འབད་ནའི་དོན་ལུ་ཨེབ་གཏང་།

མཱའུསི་དང་བཅས་ ཁྱོད་ཀྱིས་ ཤོག་ཁྲམ་གྱི་ནང་ལུ་ཨེབ་གཏང་པའི་བསྒང་ ཌའི་ལོག་འདི་རང་བཞིན་གྱིས་ཆུང་ཀུ་བཟོཝ་ཨིན། ཁྱོད་ཀྱིས་མཱའུས་ཨེབ་རྟ་འདི་འཛིན་འགྲེལ་འབདཝ་ཅིག་ ཌའི་ལོག་འདི་སོར་ཆུད་འབད་ནི་དང་ མཱའུསི་དང་བཅས་ཡོད་མི་ གཞི་བསྟུན་ཁྱབ་ཚད་ངེས་འཛིན་འབད་ཡོད་མི་འདི་ ཡིག་ཆ་གི་ནང་ལུ་གཞི་ཁྲམ་ཧོནམ་གྱིས་གཙོ་དམིགས་བཀོད་ཡོདཔ་ཨིན།

ངོས་དཔར།

བསྐུམ།

ངོས་དཔར།

འཕར་ནི།

ས་སྒོ་སྔོན་ལྟ།

འདི་གིས་ སྔོན་ལྟ་གི་ད་ལྟོའི་སེལ་འཐུ་འབད་ཡོད་མི་འདི་བཀྲམ་སྟོན་འབདཝ་ཨིན།་

ཤུལ་མམ།

ཤུལ་མམ་གྱི་ཨེབ་རྟ་འདི་ཨེབ་གཏང་ནི་དང་ དེ་ལས་ ཝི་ཛརཌི་གིས་ ད་ལྟོའི་ཌའི་ལོག་གི་སྒྲག་སྟངས་འདི་ལག་ལེན་འཐབ་ཨིན།ཨེབ་གཏང་ the ཤུལ་མམ་ ཁྱོད་མཇུག་གི་རིམ་པ་གུ་ཨིན་པ་ཅིན་ འ་ནི་ཨེབ་རྟ་འདི་ གསར་བསྐྲུན་འབད་. ལུ་འགྱུར་ནི་ཨིན།

Dialog Buttons

སླར་སྒྲིག་འབད།

Resets modified values back to the tab page previous values.

ཆ་མེད་གཏང་།

Closes dialog and discards all changes.

OK

Saves all changes and closes dialog.

Reset

Resets changes made to the current tab to those applicable when this dialog was opened.

སླར་སྒྲིག་འབད།

འ་ནི་ཌའི་ལོག་འདི་ཁ་ཕྱེ་ཡོད་པའི་བསྒང་ འཇུག་ཁྱབ་ཀྱི་ད་ལྟོའི་ཨེབ་ལྡེ་ལུ་ བསྒྱུར་བཅོས་བཟོ་ཡོད་མི་འདི་སླར་སྒྲིག་འབདཝ་ཨིན། ཌའི་ལོག་ཁ་གདམ་པའི་བསྒང་ ངེས་དཔྱདཀྱི་འདྲི་དཔྱད་འདི་མི་འབྱུང་།

སླར་སྒྲིག་འབད།

ལེགས་བཅོས་འབད་ཡོད་མི་གི་གནས་གོང་འདི་ལོག་འདི་རང་སྔོན་སྒྲིག་གནས་གོང་ལུ་སླར་སྒྲིག་འབདཝ་ཨིན།

ཉེན་བརྡའི་ངོས་དཔར།

ངེས་དཔྱད་འདྲི་དཔྱད་འདི་མི་འབྱུང་། ཁྱོད་ཀྱིས་བཏུབ་ཀྱི་ཐོག་ལས་ ཌའི་ལོག་འདི་ངེས་དཔྱད་འབད་བ་ཅིན་ ཌའི་ལོག་འདི་ནང་ཡོད་པའི་སྒྲིག་སྟངས་ཚུ་ཆ་མཉམ་སླར་སྒྲིག་ཨིན།


ཚད་ལྡན།

ཌའི་ལོག་ནང་མཐོང་ཚུགས་པའི་གནས་གོང་འདི་ལོག་འདི་རང་ སྔོན་སྒྲིག་གཞི་བཙུགས་གནས་གོང་ལུ་སླར་སྒྲིག་འབདཝ་ཨིན།

ཉེན་བརྡའི་ངོས་དཔར།

སྔོན་སྒྲིག་ཚུ་ཡང་བསྐྱར་མངོན་གསལ་མ་འབད་བའི་ཧེ་མ་ངེས་དཔྱད་མི་འབྱུང་།


རྒྱབ་ལོག

ཧེ་མའི་རིམ་པ་གི་ནང་ལུ་བཟོ་ཡོད་པའི་ཌའི་ལོག་ནང་གི་སེལ་འཐུ་ཚུ་སྟོན། ད་ལྟོའི་སྒྲིག་སྟངས་ཚུ་བསྒྱུར་བཅོས་མེདཔ་འབད་ལུསཔ་ཨིན།་ འ་ནི་ཨེབ་རྟ་འདི་ ཤོག་ལེབ་གཉིས་པ་ལས་རྐྱངམ་ཅིག་ཤུགས་ལྡན་བཟོ་བཏུབ།

Options

Click the Options label to expand the dialog to show further options. Click again to restore the dialog.

See also the following functions:

The search supports regular expressions. You can enter "all.*", for example to find the first location of "all" followed by any characters. If you want to search for a text that is also a regular expression, you must precede every character with a \ character. You can switch the automatic evaluation of regular expression on and off in - LibreOffice Calc - Calculate.

If an error occurs, the function returns a logical or numerical value.

(This command is only accessible through the context menu).

By double-clicking a tool, you can use it for multiple tasks. If you call the tool with a single-click, it reverts back to the last selection after completing the task.

Press Shift+F1 and point to a control to learn more about that control.

Options dialog buttons

OK

Save the changes in the page and close the Options dialog.

Cancel

Close the Options dialog and discard all changes done.

Reset

Resets changes made to the current tab to those applicable when this dialog was opened.

ཉེན་བརྡའི་ངོས་དཔར།

Some options cannot be reset once edited. Either edit back the changes manually or click Cancel and reopen the Options dialog.