গ্রিড
বস্তু তৈরি করার বা সরানোর জন্য গ্রিড সেটিং নির্ধারণ করে।
If you have activated the snap grid but wish to move or create individual objects without constraining them, keep the Shift key pressed to deactivate this function for as long as needed.
স্ন্যাপ
স্ন্যাপ রেখায়
Snaps the edge of a dragged object to the nearest snap line when you release the mouse.
সহায়িকাতে ছবি নেয়াসহায়িকাতে ছবি নেয়াসহায়িকাতে ছবি নেয়া আইকন ব্যবহার করে এই বৈশিষ্ট্যটি নির্ধারণ করতে পারেন, যা উপস্থাপনা অথবা আঁকার বস্তুতে অপশন বারে সহজেই খুঁজে পাওয়া যায়।
পৃষ্ঠার মার্জিনে
Specifies whether to align the contour of the graphic object to the nearest page margin.
The cursor or a contour line of the graphics object must be in the snap range.
উপস্থাপনা এবং আঁকার নথিতে পৃষ্ঠা মার্জিনে ছবি নেয়া হয় পৃষ্ঠা মার্জিনে ছবি নেয়া হয়পৃষ্ঠা মার্জিনে ছবি নেয়া হয় আইকন দ্বারাও ফাংশনটি অপশন বারে ব্যবহার করা যায়।
বস্তু ফ্রেমে
Specifies whether to align the contour of the graphic object to the border of the nearest graphic object.
The cursor or a contour line of the graphics object must be in the snap range.
উপস্থাপনা এবং আঁকার নথিতে, ফাংশনটি অপশন বারে বস্তু সীমানা দিকের ছবি নেয়া হয় বস্তু সীমানা দিকের ছবি নেয়া হয়বস্তু সীমানা দিকের ছবি নেয়া হয় আইকন দ্বারাও ব্যবহার করা যায়।
বস্তু বিন্দুতে
Specifies whether to align the contour of the graphic object to the points of the nearest graphic object.
This only applies if the cursor or a contour line of the graphics object is in the snap range.
উপস্থাপনা এবং আঁকার নথিতে, ফাংশনটি অপশন বারে বস্তুর পয়েন্টের ছবি নেয়া হয় বস্তুর পয়েন্টের ছবি নেয়া হয়বস্তুর পয়েন্টের ছবি নেয়া হয় আইকন দ্বারাও ব্যবহার করা যায়।
স্ন্যাপ পরিসর
Defines the snap distance between the mouse pointer and the object contour. LibreOffice Impress snaps to a snap point if the mouse pointer is nearer than the distance selected in the Snap range control.
Constrain Objects
বস্তু তৈরি বা সরানোর সময়
Specifies that graphic objects are restricted vertically, horizontally or diagonally (45°) when creating or moving them. You can temporarily deactivate this setting by pressing the Shift key.
প্রসারিত প্রান্ত
Specifies that a square is created based on the longer side of a rectangle when the Shift key is pressed before you release the mouse button. This also applies to an ellipse (a circle will be created based on the longest diameter of the ellipse). When the Extend edges box is not marked, a square or a circle will be created based on the shorter side or diameter.
আবর্তন করার সময়
Specifies that graphic objects can only be rotated within the rotation angle that you selected in the When rotating control. If you want to rotate an object outside the defined angle, press the Shift key when rotating. Release the key when the desired rotation angle is reached.
বিন্দু হ্রাসকরণ
Defines the angle for point reduction. When working with polygons, you might find it useful to reduce their editing points.